With the linear interpolation method, an improved absorbing boundary condition（ABC）is introduced and derived, which is suitable for the alternating-direction-implicit finite- difference time-domain （ADI-FDTD） meth...With the linear interpolation method, an improved absorbing boundary condition（ABC）is introduced and derived, which is suitable for the alternating-direction-implicit finite- difference time-domain （ADI-FDTD） method. The reflection of the ABC caused by both the truncated error and the phase velocity error is analyzed. Based on the phase velocity estimation and the nonuniform cell, two methods are studied and then adopted to improve the performance of the ABC. A calculation case of a rectangular waveguide which is a typical dispersive transmission line is carried out using the ADI-FDTD method with the improved ABC for evaluation. According to the calculated case, the comparison is given between the reflection coefficients of the ABC with and without the velocity estimation and also the comparison between the reflection coefficients of the ABC with and without the nonuniform processing. The reflection variation of the ABC under different time steps is also analyzed and the acceptable worsening will not obscure the improvement on the absorption. Numerical results obviously show that efficient improvement on the absorbing performance of the ABC is achieved based on these methods for the ADI-FDTD.展开更多
In this paper, an absorbing Fictitious Boundary Condition (FBC) is presented to generate an iterative Domain Decomposition Method (DDM) for analyzing waveguide problems.The relaxed algorithm is introduced to improve t...In this paper, an absorbing Fictitious Boundary Condition (FBC) is presented to generate an iterative Domain Decomposition Method (DDM) for analyzing waveguide problems.The relaxed algorithm is introduced to improve the iterative convergence. And the matrix equations are solved using the multifrontal algorithm. The resulting CPU time is greatly reduced.Finally, a number of numerical examples are given to illustrate its accuracy and efficiency.展开更多
This paper presents a comparison among Adomian decomposition method (ADM), Wavelet-Galerkin method (WGM), the fully explicit (1,7) finite difference technique (FTCS), the fully implicit (7,1) finite difference method ...This paper presents a comparison among Adomian decomposition method (ADM), Wavelet-Galerkin method (WGM), the fully explicit (1,7) finite difference technique (FTCS), the fully implicit (7,1) finite difference method (BTCS), (7,7) Crank-Nicholson type finite difference formula (C-N), the fully explicit method (1,13) and 9-point finite difference method, for solving parabolic differential equations with arbitrary boundary conditions and based on weak form functionals in finite domains. The problem is solved rapidly, easily and elegantly by ADM. The numerical results on a 2D transient heat conducting problem and 3D diffusion problem are used to validate the proposed ADM as an effective numerical method for solving finite domain parabolic equations. The numerical results showed that our present method is less time consuming and is easier to use than other methods. In addition, we prove the convergence of this method when it is applied to the nonlinear parabolic equation.展开更多
In this paper we consider domain decomposition methods for three-dimensional elliptic problems with Lagrange multipliers, and construct a kind of simple preconditioner for the corresponding interface equation. It will...In this paper we consider domain decomposition methods for three-dimensional elliptic problems with Lagrange multipliers, and construct a kind of simple preconditioner for the corresponding interface equation. It will be shown that condition number of the resulting preconditioned interface matrix is almost optimal.展开更多
基金The National Natural Science Foundation of China(No.60702027)the Free Research Fund of the National Mobile Communications Research Laboratory of Southeast University (No.2008B07)the National Basic Research Program of China(973 Program)(No.2007CB310603)
文摘With the linear interpolation method, an improved absorbing boundary condition（ABC）is introduced and derived, which is suitable for the alternating-direction-implicit finite- difference time-domain （ADI-FDTD） method. The reflection of the ABC caused by both the truncated error and the phase velocity error is analyzed. Based on the phase velocity estimation and the nonuniform cell, two methods are studied and then adopted to improve the performance of the ABC. A calculation case of a rectangular waveguide which is a typical dispersive transmission line is carried out using the ADI-FDTD method with the improved ABC for evaluation. According to the calculated case, the comparison is given between the reflection coefficients of the ABC with and without the velocity estimation and also the comparison between the reflection coefficients of the ABC with and without the nonuniform processing. The reflection variation of the ABC under different time steps is also analyzed and the acceptable worsening will not obscure the improvement on the absorption. Numerical results obviously show that efficient improvement on the absorbing performance of the ABC is achieved based on these methods for the ADI-FDTD.
文摘In this paper, an absorbing Fictitious Boundary Condition (FBC) is presented to generate an iterative Domain Decomposition Method (DDM) for analyzing waveguide problems.The relaxed algorithm is introduced to improve the iterative convergence. And the matrix equations are solved using the multifrontal algorithm. The resulting CPU time is greatly reduced.Finally, a number of numerical examples are given to illustrate its accuracy and efficiency.
文摘This paper presents a comparison among Adomian decomposition method (ADM), Wavelet-Galerkin method (WGM), the fully explicit (1,7) finite difference technique (FTCS), the fully implicit (7,1) finite difference method (BTCS), (7,7) Crank-Nicholson type finite difference formula (C-N), the fully explicit method (1,13) and 9-point finite difference method, for solving parabolic differential equations with arbitrary boundary conditions and based on weak form functionals in finite domains. The problem is solved rapidly, easily and elegantly by ADM. The numerical results on a 2D transient heat conducting problem and 3D diffusion problem are used to validate the proposed ADM as an effective numerical method for solving finite domain parabolic equations. The numerical results showed that our present method is less time consuming and is easier to use than other methods. In addition, we prove the convergence of this method when it is applied to the nonlinear parabolic equation.
基金This research is supported by the Special Funds for Major State Research Projects of China(G 1999032804)
文摘In this paper we consider domain decomposition methods for three-dimensional elliptic problems with Lagrange multipliers, and construct a kind of simple preconditioner for the corresponding interface equation. It will be shown that condition number of the resulting preconditioned interface matrix is almost optimal.
