In the range of 620？710 °C, air was blown into A356 aluminum alloy melt to produce aluminum foams. In order to study the influence of temperature on the thickness of oxide film on bubble surface, Auger electron ...In the range of 620？710 °C, air was blown into A356 aluminum alloy melt to produce aluminum foams. In order to study the influence of temperature on the thickness of oxide film on bubble surface, Auger electron spectroscopy （AES） was used. Based on the knowledge of corrosion science and hydrodynamics, two oxidation kinetics models of oxide film on bubble surface were established. The thicknesses of oxide films produced at different temperatures were predicted through those two models. Furthermore, the theoretical values were compared with the experimental values. The results indicate that in the range of 620？710 °C, the theoretical values of the thickness of oxide film predicted by the model including the rising process are higher than the experimental values. While, the theoretical values predicted by the model without the rising process are in good agreement with the experimental values, which shows this model objectively describes the oxidation process of oxide film on bubble surface. This work suggests that the oxidation kinetics of oxide film on bubble surface of aluminum foams produced by gas injection foaming process follows the Arrhenius equation.展开更多
In order to speed underwater launch of minor-caliber weapons,a sealing device can be set in front of underwater muzzle to separate water,preventing the muzzle from water immersion.By establishing and simplifying the m...In order to speed underwater launch of minor-caliber weapons,a sealing device can be set in front of underwater muzzle to separate water,preventing the muzzle from water immersion.By establishing and simplifying the model of underwater weapon sealing device and unstructured mesh computing domain model based on computational fluid dynamics（CFD）,dynamic mesh and user defined function（UDF）,the N-S equation is solved and the numerical analysis and calculation of the complex two-phase flow inside the sealing device are carried out.The results show that the gas discharged from the sealing device is conducive to the formation of the projectile supercavity.When the projectile is launched at 5munder water,the shock wave before and after the projectile has impact on the box body up to 100 MPa,therefore the sealing device must be strong enough.The research results have the vital significance to the design of underwater weapon sealing device and the formation of the projectile supercavitation.展开更多
In this paper, the flow field is assumed to be inviscid, irrotational and incompressible, triangular elements are adopted to discretize the boundary of flow field, the boundary integral method is used to solve the flo...In this paper, the flow field is assumed to be inviscid, irrotational and incompressible, triangular elements are adopted to discretize the boundary of flow field, the boundary integral method is used to solve the flow field and the Mixed-Eulerian-Lagrangian method is applied to simulate the evolution of bubble. Three-dimensional smoothing method is used to smooth the bubble surface and the velocity potential to make the computing process more accurate and stable. In the analysis process, three-dimensional model simulates the dynamics of a bubble in the free field, gravitational field and near the rigid wall respectively, and the calculated results coincide well with the exact results and experimental data, which show that the algorithm and 3D model in this paper are of high accuracy. Calculation process indicates that bubble takes on strong non-linear under the combine effect of gravity and rigid wall.展开更多
Dispersed multiphase flows,including gas-particle(gas-solid),gas-spray,liquid-particle(liquid-solid) ,liquid-bubble,and bubble-liquid-particle flows,are widely encountered in power,chemical and metallurgical,aeronauti...Dispersed multiphase flows,including gas-particle(gas-solid),gas-spray,liquid-particle(liquid-solid) ,liquid-bubble,and bubble-liquid-particle flows,are widely encountered in power,chemical and metallurgical,aeronautical and astronautical,transportation,hydraulic and nuclear engineering. In this paper,advances and re-search needs in fundamental studies of dispersed multiphase flows,including the particle/droplet/bubble dynamics,particle-particle,droplet-droplet and bubble-bubble interactions,gas-particle and bubble-liquid turbulence interac-tions,particle-wall interaction,numerical simulation of dispersed multiphase flows,including Reynolds-averaged modeling(RANS modeling),large-eddy simulation(LES) and direct numerical simulation(DNS) are reviewed. The research results obtained by the present author are also included in this review.展开更多
A general CFD-PBE(computational fluid dynamics-population balance equation) solver for gas–liquid poly-dispersed flows of both low and high gas volume fractions is developed in OpenFOAM(open-source field operation an...A general CFD-PBE(computational fluid dynamics-population balance equation) solver for gas–liquid poly-dispersed flows of both low and high gas volume fractions is developed in OpenFOAM(open-source field operation and manipulation) in this work. Implementation of this solver in OpenFOAM is illustrated in detail. The PBE is solved with the cell average technique. The coupling between pressure and velocity is dealt with the transient PIMPLE algorithm, which is a merged PISO-SIMPLE(pressure implicit split operator-semi-implicit method for pressure-linked equations) algorithm. Results show generally good agreement with the published experimental data, whereas the modeling precision could be improved further with more sophisticated closure models for interfacial forces, the models for the bubble-induced turbulence and those for bubble coalescence and breakage.The results also indicate that the PBE could be solved out the PIMPLE loop to save much computation time while still preserving the time information on variables. This is important for CFD-PBE modeling of many actual gas–liquid problems, which are commonly high-turbulent flows with intrinsic transient and 3 D characteristics.展开更多
A digital photographic study of pool boiling with binary mixture Rll（CC13）-Rll3（CCl3CF3） was performed on a horizontal transparent heater at pressure of 0.1MPa. A high speed digital camera was applied to record th...A digital photographic study of pool boiling with binary mixture Rll（CC13）-Rll3（CCl3CF3） was performed on a horizontal transparent heater at pressure of 0.1MPa. A high speed digital camera was applied to record the bubble behaviors in boiling process. Strong effects of composition on bubble departure diameter, deparatre time, nucleation density were observed, which was attributed to the nature of the activation of the boiling surface and mass diffusion effects. The bubble departure diameter, departure period and nucleation density as functions of composition for binary mixtures R 11-R 113 were presented respectively. From the video images, it can be concluded that evaporation of microlayer is very important to the growth of bubble. It is also observed that there is not any liquid recruited into the microlayer below the bubble.展开更多
A kinetic model fitted by the empirical equation has been proposed to describe the liquid drainage behavior. Rate constants （kd） of liquid drainage equation could be obtained from the above empirical equation. In th...A kinetic model fitted by the empirical equation has been proposed to describe the liquid drainage behavior. Rate constants （kd） of liquid drainage equation could be obtained from the above empirical equation. In this paper, the stability of the colloidal gas aphrons （CGAs）, the effect of concentrations of sodium dodecyl benzene sulphate （SDBS）, dodecyl trimethylammonium bromide （HTAB） and polyoxyethylene sorbitol anhydride monolaurate（Tween-20）, temperature, stirring speed, stirring time, and various kinds of salts on the kd of liquid drainage are further investigated. The results show that the Arrhenius equation can be successfully used to describe the relation between kd arid absolute temperature （T）, and concentrations of surfactants, stirring speed, stirring time and salinities also have great effect on the kd. At last, the CGAs drainage mechanism is explained from analysis of the rate of liquid drainage as a function of time.展开更多
基金Project(51371104)supported by the National Nature Science Foundation of China
文摘In the range of 620？710 °C, air was blown into A356 aluminum alloy melt to produce aluminum foams. In order to study the influence of temperature on the thickness of oxide film on bubble surface, Auger electron spectroscopy （AES） was used. Based on the knowledge of corrosion science and hydrodynamics, two oxidation kinetics models of oxide film on bubble surface were established. The thicknesses of oxide films produced at different temperatures were predicted through those two models. Furthermore, the theoretical values were compared with the experimental values. The results indicate that in the range of 620？710 °C, the theoretical values of the thickness of oxide film predicted by the model including the rising process are higher than the experimental values. While, the theoretical values predicted by the model without the rising process are in good agreement with the experimental values, which shows this model objectively describes the oxidation process of oxide film on bubble surface. This work suggests that the oxidation kinetics of oxide film on bubble surface of aluminum foams produced by gas injection foaming process follows the Arrhenius equation.
基金National Natural Science Foundation of China(No.51175481)
文摘In order to speed underwater launch of minor-caliber weapons,a sealing device can be set in front of underwater muzzle to separate water,preventing the muzzle from water immersion.By establishing and simplifying the model of underwater weapon sealing device and unstructured mesh computing domain model based on computational fluid dynamics（CFD）,dynamic mesh and user defined function（UDF）,the N-S equation is solved and the numerical analysis and calculation of the complex two-phase flow inside the sealing device are carried out.The results show that the gas discharged from the sealing device is conducive to the formation of the projectile supercavity.When the projectile is launched at 5munder water,the shock wave before and after the projectile has impact on the box body up to 100 MPa,therefore the sealing device must be strong enough.The research results have the vital significance to the design of underwater weapon sealing device and the formation of the projectile supercavitation.
文摘In this paper, the flow field is assumed to be inviscid, irrotational and incompressible, triangular elements are adopted to discretize the boundary of flow field, the boundary integral method is used to solve the flow field and the Mixed-Eulerian-Lagrangian method is applied to simulate the evolution of bubble. Three-dimensional smoothing method is used to smooth the bubble surface and the velocity potential to make the computing process more accurate and stable. In the analysis process, three-dimensional model simulates the dynamics of a bubble in the free field, gravitational field and near the rigid wall respectively, and the calculated results coincide well with the exact results and experimental data, which show that the algorithm and 3D model in this paper are of high accuracy. Calculation process indicates that bubble takes on strong non-linear under the combine effect of gravity and rigid wall.
基金Supported by the Key Projects of National Natural Science Foundation of China （50736006 9587003-13） the State Key Development Program for Basic Research of China （G1999-0222-08） the National Pandeng Project of China （85-06-1-2）
文摘Dispersed multiphase flows,including gas-particle(gas-solid),gas-spray,liquid-particle(liquid-solid) ,liquid-bubble,and bubble-liquid-particle flows,are widely encountered in power,chemical and metallurgical,aeronautical and astronautical,transportation,hydraulic and nuclear engineering. In this paper,advances and re-search needs in fundamental studies of dispersed multiphase flows,including the particle/droplet/bubble dynamics,particle-particle,droplet-droplet and bubble-bubble interactions,gas-particle and bubble-liquid turbulence interac-tions,particle-wall interaction,numerical simulation of dispersed multiphase flows,including Reynolds-averaged modeling(RANS modeling),large-eddy simulation(LES) and direct numerical simulation(DNS) are reviewed. The research results obtained by the present author are also included in this review.
基金Supported by the National Key Research and Development Program(2016YFB0301702)National Natural Science Foundation of China(21776284,21476236)+1 种基金Key Research Program of Frontier Sciences,CAS(QYZDJ-SSW-JSC030)Jiangsu National Synergetic Innovation Center for Advanced Materials
文摘A general CFD-PBE(computational fluid dynamics-population balance equation) solver for gas–liquid poly-dispersed flows of both low and high gas volume fractions is developed in OpenFOAM(open-source field operation and manipulation) in this work. Implementation of this solver in OpenFOAM is illustrated in detail. The PBE is solved with the cell average technique. The coupling between pressure and velocity is dealt with the transient PIMPLE algorithm, which is a merged PISO-SIMPLE(pressure implicit split operator-semi-implicit method for pressure-linked equations) algorithm. Results show generally good agreement with the published experimental data, whereas the modeling precision could be improved further with more sophisticated closure models for interfacial forces, the models for the bubble-induced turbulence and those for bubble coalescence and breakage.The results also indicate that the PBE could be solved out the PIMPLE loop to save much computation time while still preserving the time information on variables. This is important for CFD-PBE modeling of many actual gas–liquid problems, which are commonly high-turbulent flows with intrinsic transient and 3 D characteristics.
基金Supported by the National Natural Science Foundation of China (No.10355001) and the Century Programme of ChineseAcademy of Sciences.
文摘A digital photographic study of pool boiling with binary mixture Rll（CC13）-Rll3（CCl3CF3） was performed on a horizontal transparent heater at pressure of 0.1MPa. A high speed digital camera was applied to record the bubble behaviors in boiling process. Strong effects of composition on bubble departure diameter, deparatre time, nucleation density were observed, which was attributed to the nature of the activation of the boiling surface and mass diffusion effects. The bubble departure diameter, departure period and nucleation density as functions of composition for binary mixtures R 11-R 113 were presented respectively. From the video images, it can be concluded that evaporation of microlayer is very important to the growth of bubble. It is also observed that there is not any liquid recruited into the microlayer below the bubble.
基金Supported by the Eleventh Five Year National Key Technology R&D Program (2008BAE58B01)New Century Excellent Talents of Ministry of Education (NCET-07-0577),the People’s Republic of China
文摘A kinetic model fitted by the empirical equation has been proposed to describe the liquid drainage behavior. Rate constants （kd） of liquid drainage equation could be obtained from the above empirical equation. In this paper, the stability of the colloidal gas aphrons （CGAs）, the effect of concentrations of sodium dodecyl benzene sulphate （SDBS）, dodecyl trimethylammonium bromide （HTAB） and polyoxyethylene sorbitol anhydride monolaurate（Tween-20）, temperature, stirring speed, stirring time, and various kinds of salts on the kd of liquid drainage are further investigated. The results show that the Arrhenius equation can be successfully used to describe the relation between kd arid absolute temperature （T）, and concentrations of surfactants, stirring speed, stirring time and salinities also have great effect on the kd. At last, the CGAs drainage mechanism is explained from analysis of the rate of liquid drainage as a function of time.
