Ultrasonic speeds of 4-aminobutyric acid in 0.0041,0.0125 and 0.0207 mol·kg^-1 aqueous salbutamol sulphate（SBS） solutions are measured at 308.15,313.15 and 318.15 K.Isentropic compressibility kS,change in isent...Ultrasonic speeds of 4-aminobutyric acid in 0.0041,0.0125 and 0.0207 mol·kg^-1 aqueous salbutamol sulphate（SBS） solutions are measured at 308.15,313.15 and 318.15 K.Isentropic compressibility kS,change in isentropic compressibility△k S,relative change in isentropic compressibility（ △kS /kS^0） ,apparent molal compressibility kφ,limiting apparent molal compressibility kφ^0 ,transfer limiting apparent molal compressibility k φ^0,hydration number nH,pair and triplet interaction parameters kAS,kASS are estimated.The above parameters are used to interpret the solute-solute and solute-solvent interactions of 4-aminobutyric acid in the aqueous salbutamol sulphate solutions.展开更多
L-aspartic acid zinc was synthesized by a rapid and convenient method in high yield under microwave conditions, and its single crystal structure was analyzed by X-ray diffraction. The structure unit of the title compo...L-aspartic acid zinc was synthesized by a rapid and convenient method in high yield under microwave conditions, and its single crystal structure was analyzed by X-ray diffraction. The structure unit of the title compound is [Zn(L-Asp)(H2O)2]·H2O, which is a bicyclo-complex forming a spiral linear polymer via coordination bonds. The spiral linear polymers are assembled as a three-dimensional supramolecule by intermolecular hydrogen bonds. The crystal belongs to the orthorhombic crystal system, P2(1)2(1)2(1) space group, a=0.7830(3) nm, b=0.9369(4) nm, c=11.599(5) nm, α=β=γ=90.00°, V=0.8509(6) nm3, Z=4, Dc=1.955 g/cm3, F(000)=512, μ=2.289. The toxicity of the title compound is lower than that of glutamic acid zinc and zinc sulfate. Keywords L-aspartic acid - zinc - microwave - supramolecule - toxicity展开更多
This paper studies the formation and evolution of phase structure of isotactic polypropylene/poly（cis-1,4-butadiene） （iPP/PCBR） blends during molten and mixing in a visual mixer by on-line analysis of the small an...This paper studies the formation and evolution of phase structure of isotactic polypropylene/poly（cis-1,4-butadiene） （iPP/PCBR） blends during molten and mixing in a visual mixer by on-line analysis of the small angle light back scattering. The density fluctuation of iPP/PcBR blends during molten and mixing is discussed using the integral-intensity Js, of the scattering intensity of the blends. The ＂invariant＂ Q, which shows fluctuation of the system, is calculated by data of the small angle light back scattering, and the variation of Q with the blending time, temperature and shear rate during molten and mixing in iPP/PcBR blends is discussed. The structure parameters which characterize dimensions of phase in the blends, as the correlation distance ac, and the average chord lengths of two-phase, as lipp and lPcBR, are calculated by data of scattering intensity. The average diameters dp of dispersed phases are calculated from SEM images. The variation of ac, dp, lipp and lPcBR with the blending time and compositions in the blends during molten and mixing is discussed. The scale law is analyzed to find multi-scale char- acteristics in this system. The generalized fractal dimension Dp is calculated and the relation of Dp with generalized entropy function is discussed to determine that Dp is state function and the physical significance of Dp is the same as that of the generalized entropy function. polymer blends, on-line analysis, fractal, polypropylene展开更多
Objective To study the effects of 1% tetracaine hydrochloride jelly for pain control of patients receiving transrectal ultrasound （TRUS）-guided prostate biopsy. Methods A total of 100 patients receiving TRUS-guided ...Objective To study the effects of 1% tetracaine hydrochloride jelly for pain control of patients receiving transrectal ultrasound （TRUS）-guided prostate biopsy. Methods A total of 100 patients receiving TRUS-guided prostate biopsy were divided into two groups with 50 in each. In Group 1, patients received liquid paraffin, and in Group 2, patients were given 1% tetracaine hydrochloride jelly before biopsy. Pain score was measured by horizontal visual analogue scales （ VAS ）, and pain and discomfort were compared between the two groups. Results The average pain scores at the time of insertion of the ultrasound probe were 2. 9 ＋_1. 7 and 1. 4 ＋_1. 8 （ P =0. 000） and the average pain scores at the time of performing biopsy were 5. 2 ＋-1. 5 and 3. 1 ＋ 1. 7 （P =0. 000） in Group 1 and Group 2, respectively. There were no significant differences between the two groups in terms of age, serum prostate specific antigen, digital rectal examination, TRUS, and biopsy core number （ P 〉 O. 05 ）. There were no significant differences of complications after biopsy, such as hematuria, acute urinary retention, urinary tract infection, rectum bleeding, and fever （ P 〉0. 05）. Conclusion TRUS-guided prostate biopsy is safe. Use of 1% tetracaine hydrochloride jelly in the rectum and anus before TRUS-guided prostate biopsy is an effective method for relieving TRUS-guided prostate biopsy-induced pain during the procedure.展开更多
文摘Ultrasonic speeds of 4-aminobutyric acid in 0.0041,0.0125 and 0.0207 mol·kg^-1 aqueous salbutamol sulphate（SBS） solutions are measured at 308.15,313.15 and 318.15 K.Isentropic compressibility kS,change in isentropic compressibility△k S,relative change in isentropic compressibility（ △kS /kS^0） ,apparent molal compressibility kφ,limiting apparent molal compressibility kφ^0 ,transfer limiting apparent molal compressibility k φ^0,hydration number nH,pair and triplet interaction parameters kAS,kASS are estimated.The above parameters are used to interpret the solute-solute and solute-solvent interactions of 4-aminobutyric acid in the aqueous salbutamol sulphate solutions.
基金This work was supported by the National Natural Science Foundation of China(Grant No.20371040)the Foundation of Gansu Province(Grant No.021-23)and the Foundation of Northwest Normal University(Grant No.02-18).
文摘L-aspartic acid zinc was synthesized by a rapid and convenient method in high yield under microwave conditions, and its single crystal structure was analyzed by X-ray diffraction. The structure unit of the title compound is [Zn(L-Asp)(H2O)2]·H2O, which is a bicyclo-complex forming a spiral linear polymer via coordination bonds. The spiral linear polymers are assembled as a three-dimensional supramolecule by intermolecular hydrogen bonds. The crystal belongs to the orthorhombic crystal system, P2(1)2(1)2(1) space group, a=0.7830(3) nm, b=0.9369(4) nm, c=11.599(5) nm, α=β=γ=90.00°, V=0.8509(6) nm3, Z=4, Dc=1.955 g/cm3, F(000)=512, μ=2.289. The toxicity of the title compound is lower than that of glutamic acid zinc and zinc sulfate. Keywords L-aspartic acid - zinc - microwave - supramolecule - toxicity
基金support of the National Natural Science Foundation of China (51033004)
文摘This paper studies the formation and evolution of phase structure of isotactic polypropylene/poly（cis-1,4-butadiene） （iPP/PCBR） blends during molten and mixing in a visual mixer by on-line analysis of the small angle light back scattering. The density fluctuation of iPP/PcBR blends during molten and mixing is discussed using the integral-intensity Js, of the scattering intensity of the blends. The ＂invariant＂ Q, which shows fluctuation of the system, is calculated by data of the small angle light back scattering, and the variation of Q with the blending time, temperature and shear rate during molten and mixing in iPP/PcBR blends is discussed. The structure parameters which characterize dimensions of phase in the blends, as the correlation distance ac, and the average chord lengths of two-phase, as lipp and lPcBR, are calculated by data of scattering intensity. The average diameters dp of dispersed phases are calculated from SEM images. The variation of ac, dp, lipp and lPcBR with the blending time and compositions in the blends during molten and mixing is discussed. The scale law is analyzed to find multi-scale char- acteristics in this system. The generalized fractal dimension Dp is calculated and the relation of Dp with generalized entropy function is discussed to determine that Dp is state function and the physical significance of Dp is the same as that of the generalized entropy function. polymer blends, on-line analysis, fractal, polypropylene
文摘Objective To study the effects of 1% tetracaine hydrochloride jelly for pain control of patients receiving transrectal ultrasound （TRUS）-guided prostate biopsy. Methods A total of 100 patients receiving TRUS-guided prostate biopsy were divided into two groups with 50 in each. In Group 1, patients received liquid paraffin, and in Group 2, patients were given 1% tetracaine hydrochloride jelly before biopsy. Pain score was measured by horizontal visual analogue scales （ VAS ）, and pain and discomfort were compared between the two groups. Results The average pain scores at the time of insertion of the ultrasound probe were 2. 9 ＋_1. 7 and 1. 4 ＋_1. 8 （ P =0. 000） and the average pain scores at the time of performing biopsy were 5. 2 ＋-1. 5 and 3. 1 ＋ 1. 7 （P =0. 000） in Group 1 and Group 2, respectively. There were no significant differences between the two groups in terms of age, serum prostate specific antigen, digital rectal examination, TRUS, and biopsy core number （ P 〉 O. 05 ）. There were no significant differences of complications after biopsy, such as hematuria, acute urinary retention, urinary tract infection, rectum bleeding, and fever （ P 〉0. 05）. Conclusion TRUS-guided prostate biopsy is safe. Use of 1% tetracaine hydrochloride jelly in the rectum and anus before TRUS-guided prostate biopsy is an effective method for relieving TRUS-guided prostate biopsy-induced pain during the procedure.
