Chromium ore fines containing coal (COFCC) can be rapidly heated by microwave to conduct the voluminal reduction, which lays a foundation of getting sponge ferrochromium powders with a lower content of C. Under the co...Chromium ore fines containing coal (COFCC) can be rapidly heated by microwave to conduct the voluminal reduction, which lays a foundation of getting sponge ferrochromium powders with a lower content of C. Under the conditions of COFCC with n(O)-n(C) (molar ratio) as 1.00-0.84 and n(SiO2)-n(CaO) as 1.00-0.39, the samples were heated by 10 kW microwave power to reach the given temperatures and held for different times respectively. The results show that the low-C-Cr ferrochromium metal phase in the reduced materials forms before the high-C-Cr ferrochromium metal phase does. With increasing temperature the C content of ferrochromium metals is in a positive correlation with the content of Cr. The C content of ferrochromium metal in reduced materials is 0-10.07% with an average value of 4.68%. With the increase of holding time the Cr content in ferrochromium metals is in a negative correlation with the content of C, while the content of Fe changes in the contrary way. In the microwave field the kinetic conditions of carburization are closely related with the temperature of microwave heating, holding time and carbon fitting ratio.展开更多
The plasma polymerization method and dynamic ion-beam mixed implantation method were employed to coat ultra-thin polymer films on copper plates. Experiments indicated that steady dropwise condensation of steam at atmo...The plasma polymerization method and dynamic ion-beam mixed implantation method were employed to coat ultra-thin polymer films on copper plates. Experiments indicated that steady dropwise condensation of steam at atmospheric pressure occurred. The condensation heat transfer coefficients increased by approximately 3 and 5－7 times for the polytrimethylvinylsilane film and polytetrafluoroethylene film respectively, compared with the value for film condensation under the same experimental conditions. The temperatures on the condensing surface and inside the test block were found to be rapidly and randomly fluctuated. The properties of the coated films and advantages of the methods used in this investigation were discussed briefly.展开更多
This paper seeks to model and forecast the Chinese nonferrous metals futures market volatility and allows new insights into the time-varying volatility of realized volatility and leverage effects using high-frequency ...This paper seeks to model and forecast the Chinese nonferrous metals futures market volatility and allows new insights into the time-varying volatility of realized volatility and leverage effects using high-frequency data.The LHAR-CJ model is extended and the empirical research on copper and aluminum futures in Shanghai Futures Exchange suggests the dynamic dependencies and time-varying volatility of realized volatility,which are captured by long memory HAR-GARCH model.Besides,the findings also show the significant weekly leverage effects in Chinese nonferrous metals futures market volatility.Finally,in-sample and out-of-sample forecasts are investigated,and the results show that the LHAR-CJ-G model,considering time-varyingvolatility of realized volatility and leverage effects,effectively improves the explanatory power as well as out-of sample predictive performance.展开更多
Volatility of commodity prices has affected dramatically the coffee industry in recent years, particularly small holder farmers. Differentiation of coffee through certification, such as sustainahility and quality attr...Volatility of commodity prices has affected dramatically the coffee industry in recent years, particularly small holder farmers. Differentiation of coffee through certification, such as sustainahility and quality attributes, has been proposed as a strategy for protection of the farmers against volatility in the international prices. This research paper evaluated three different models to explore the effectiveness of the differentiation strategies in protecting the farmer against price volatility in recent years, focusing on the case of Costa Rica. Evidence showed important differences in the price dynamics over time when comparing three groups of coffee.展开更多
A novel precision vibration-assisted micro-engraving system was developed by the integration of fast tool servo and ultrasonic elliptical vibration system, in which the flexure hinge was designed to avoid backlash and...A novel precision vibration-assisted micro-engraving system was developed by the integration of fast tool servo and ultrasonic elliptical vibration system, in which the flexure hinge was designed to avoid backlash and PID control algorithm was established to guarantee specific precision. Apart from experimental validation of the performance of the system, various micro-V-grooves cutting experiments on aluminum alloy, ferrous material and hard cutting material were performed, in which Kistler force sensor was used to measure cutting force. Through experiments, it was clear that the vibration-assisted micro-engraving system can ensure good quality of micro-V-grooves and reduce cutting force by about 60% compared with traditional removal process without ultrasonic vibration.展开更多
基金Project(50474083) supported by the National Natural Science Foundation of ChinaProject supported by the Baoshan Iron & Steel Co. Ltd. of China
文摘Chromium ore fines containing coal (COFCC) can be rapidly heated by microwave to conduct the voluminal reduction, which lays a foundation of getting sponge ferrochromium powders with a lower content of C. Under the conditions of COFCC with n(O)-n(C) (molar ratio) as 1.00-0.84 and n(SiO2)-n(CaO) as 1.00-0.39, the samples were heated by 10 kW microwave power to reach the given temperatures and held for different times respectively. The results show that the low-C-Cr ferrochromium metal phase in the reduced materials forms before the high-C-Cr ferrochromium metal phase does. With increasing temperature the C content of ferrochromium metals is in a positive correlation with the content of Cr. The C content of ferrochromium metal in reduced materials is 0-10.07% with an average value of 4.68%. With the increase of holding time the Cr content in ferrochromium metals is in a negative correlation with the content of C, while the content of Fe changes in the contrary way. In the microwave field the kinetic conditions of carburization are closely related with the temperature of microwave heating, holding time and carbon fitting ratio.
基金the National Natural Science Foundation of China (No. 59906002) and the Foundation for Young Teachers of Dalian University of Technology.
文摘The plasma polymerization method and dynamic ion-beam mixed implantation method were employed to coat ultra-thin polymer films on copper plates. Experiments indicated that steady dropwise condensation of steam at atmospheric pressure occurred. The condensation heat transfer coefficients increased by approximately 3 and 5－7 times for the polytrimethylvinylsilane film and polytetrafluoroethylene film respectively, compared with the value for film condensation under the same experimental conditions. The temperatures on the condensing surface and inside the test block were found to be rapidly and randomly fluctuated. The properties of the coated films and advantages of the methods used in this investigation were discussed briefly.
基金Project(13&ZD169)supported by the Major Program of the National Social Science Foundation of ChinaProject(2016zzts009)supported by Doctoral Students Independent Explore Innovation Project of Central South University,China+3 种基金Project(13YJAZH149)supported by the Social Science Foundation of Ministry of Education of ChinaProject(2015JJ2182)supported by the Social Science Foundation of Hunan Province,ChinaProject(71573282)supported by the National Natural Science Foundation of ChinaProject(15K133)supported by the Educational Commission of Hunan Province of China
文摘This paper seeks to model and forecast the Chinese nonferrous metals futures market volatility and allows new insights into the time-varying volatility of realized volatility and leverage effects using high-frequency data.The LHAR-CJ model is extended and the empirical research on copper and aluminum futures in Shanghai Futures Exchange suggests the dynamic dependencies and time-varying volatility of realized volatility,which are captured by long memory HAR-GARCH model.Besides,the findings also show the significant weekly leverage effects in Chinese nonferrous metals futures market volatility.Finally,in-sample and out-of-sample forecasts are investigated,and the results show that the LHAR-CJ-G model,considering time-varyingvolatility of realized volatility and leverage effects,effectively improves the explanatory power as well as out-of sample predictive performance.
文摘Volatility of commodity prices has affected dramatically the coffee industry in recent years, particularly small holder farmers. Differentiation of coffee through certification, such as sustainahility and quality attributes, has been proposed as a strategy for protection of the farmers against volatility in the international prices. This research paper evaluated three different models to explore the effectiveness of the differentiation strategies in protecting the farmer against price volatility in recent years, focusing on the case of Costa Rica. Evidence showed important differences in the price dynamics over time when comparing three groups of coffee.
基金Supported by National High Technology Research and Development Program of China ("863" Program, No. 2009AA043802)Japan Society for the Promotion of Science
文摘A novel precision vibration-assisted micro-engraving system was developed by the integration of fast tool servo and ultrasonic elliptical vibration system, in which the flexure hinge was designed to avoid backlash and PID control algorithm was established to guarantee specific precision. Apart from experimental validation of the performance of the system, various micro-V-grooves cutting experiments on aluminum alloy, ferrous material and hard cutting material were performed, in which Kistler force sensor was used to measure cutting force. Through experiments, it was clear that the vibration-assisted micro-engraving system can ensure good quality of micro-V-grooves and reduce cutting force by about 60% compared with traditional removal process without ultrasonic vibration.
