融合波模和射线理论的矿井电波传播模型

本文提出了电波在煤矿井巷内传播的融合模型:利用波导波模理论修正射线模型,确定巷道内源射线的个数及其离开发射机的方向;通过几何光学基本定律证明矩形巷道内射线传播路径投影的反射定律和夹角定律,推导出射线到达接收天线所在巷道截面的位置、经历的反射次数、路径长度等与射线离开角的关系,以改进主动射线跟踪法,简化计算;运用接收球原理判断各射线经反射后能否到达接收机.经仿真并与实测数据比较,验证了模型的正确性.

Models for amplitude fluctuation of underwater acoustic narrow band signal based on modified modal scintillation index

A self-normalized statistic the modified modal scintillation index MMSI is proposed and defined as the variance of the modulus of modal excitation normalized by the square of its expected value over some observation intervals.It is proved in an analytical form that the MMSI is a depth dependent signature and independent of the source level and the source range under the condition of the ideal waveguide while the classical modal scintillation index MSI depends on both the source level and the source range.The MSI and the MMSI in the Pekeris waveguide at 70 Hz are simulated with different source levels and source ranges by the Kraken normal mode model.The simulation results are consistent with the theoretical deduction.The MMSI probability density functions PDFs of different normal modes for surface and submerged sources are calculated using the mode filtering methods with the same variations of vertical motions.It is indicated that the PDFs can be used to separate the submerged and the surface sources except for the fourth mode.

Temperature sensor based on polymer thin film optical waveguide

Based on attenuated total reflection （ATR） and thermo-optic effect, the polymeric thin film planar optical waveguide is used as the temperature sensor, and the factors influencing the sensitivity of the temperature sensor are comprehensively analyzed. Combined with theoretical analysis and experimental investigation, the sensitivity of the temperature sensor is related to the thicknesses of the upper cladding layer, the waveguide layer, the optical loss of the polymer material and the guided wave modes. The results show that the slope value about reflectivity and temperature, which stands for the sensitivity of the polymer thin film temperature sensor, is associated with the waveguide film thickness and the guided wave modes, and the slope value is the highest in the zero reflectance of a certain transverse electric （TE） mode. To improve the sensitivity of the temperature sensor, the sensor＇s working incident light exterior angle α should be chosen under a certain TE mode with the reflectivity to be zero. This temperature sensor is characterized by high sensitivity and simple structure and it is easily fabricated.

Analysis of circular-to-circular groove waveguide junction

Mode matching method is used to analyze the scattering characteristics of thecircular-to-circular groove waveguide junction. Matching the electric fields and magnetic fields atthe boundary of the junction, and multiplying the mode functions of the circular waveguide andcircular groove waveguide on both sides of the boundary equation, the scattering matrix equation isobtained, the scattering coefficients can be obtained from the equation. Then the scatteringcharacteristics of the iris with circular window in circular groove waveguide are analyzed. At lastthe convergent problem is discussed; when choosing a suitable mode group, convergent numericalresults are obtained, and the frequency response of the iris' scattering coefficients is also given.

Characteristic Analysis of Diffraction from the Restricted Output End Surface of Single Mode Planar Waveguide

As for single mode symmetric step refractive index structure dielectric planar optical waveguide, when its output end is restricted, the diffractive field distribution is derived. It can be expressed as the convolution between the Dirac function and the Sinc and Lorenz functions. It is helpful to deepen the recognition of the restricted diffraction. The characteristic of the diffractive field is discussed. The variational curve of the full angle width at half maximum intensity of central bright fringe versus the half width of slit is presented by numerical calculation, and the fitting curve with the exponential function is close to it.

Analysis of reflection coefficient for coated optical waveguide devices

From an ordinary condition,using a full three-dimensional model theory and an infinite perturbation expansion method,an exact solution of the reflection coefficient for the coated narrow stripe-geometry optical waveguide devices has been derived.All six components and the vector property of the electromagnetic field have been considered.The results are suitable for the symmetric and asymmetric waveguides.

Electrostatic Surface Waves on Semi-Bounded Quantum Electron-Hole Semiconductor Plasmas

The electrostatic surface waves on semi-bounded quantum electron-hole semiconductor plasmas are studied within the framework of the quantum hydrodynamic model, including the electrons and holes quantum recoil effects,quantum statistical pressures of the plasma species, as well as exchange and correlation effects. The dispersion characteristics of surface electrostatic oscillations are investigated by using the typical values of Ga As, Ga Sb and Ga N semiconductors. Numerical results show the existence of one low-frequency branch due to the mass difference between the electrons and holes in addition to one high-frequency branch due to charge-separation effects.