High-power ridge-waveguide tapered InGaAs-AlGaAs lasers emitting at 980nm were fabricated. Lasers with a total length L = 1850μm and different lengths of the ridge waveguide Lrw were processed to study the influence ...High-power ridge-waveguide tapered InGaAs-AlGaAs lasers emitting at 980nm were fabricated. Lasers with a total length L = 1850μm and different lengths of the ridge waveguide Lrw were processed to study the influence of the straight section on the spatial mode filtering. When Lrw is 450μm, the devices have the optimized maxi- mum output power and beam quality,and the output power P is 4. 28W. The beam propagation ratio M2 is 3. 79 at 1W.展开更多
This paper researches end diffraction of slab waveguide and then matching efficiency between the far-field and its Gaussian approximate field is analyzed leads to a new definition of divergence half-angle. Finally, wh...This paper researches end diffraction of slab waveguide and then matching efficiency between the far-field and its Gaussian approximate field is analyzed leads to a new definition of divergence half-angle. Finally, why the far-field can be approximated by a Gaussian function is presented according to characteristic of beam propagation factor.展开更多
The relation between diffractive beam parameters and normalized frequency is analyzed that leads to two improved Tormulas for two kinds of mode-field halT-widths and several formulas for divergence angle as well as be...The relation between diffractive beam parameters and normalized frequency is analyzed that leads to two improved Tormulas for two kinds of mode-field halT-widths and several formulas for divergence angle as well as beam propagation factor. The numerical calculation indicates that the maximal relative error is less than 0.5% within a reasonable parameter range.展开更多
文摘High-power ridge-waveguide tapered InGaAs-AlGaAs lasers emitting at 980nm were fabricated. Lasers with a total length L = 1850μm and different lengths of the ridge waveguide Lrw were processed to study the influence of the straight section on the spatial mode filtering. When Lrw is 450μm, the devices have the optimized maxi- mum output power and beam quality,and the output power P is 4. 28W. The beam propagation ratio M2 is 3. 79 at 1W.
基金Supported by the Program of Fujian Education Department under Grant No. JB09069the Natural Science Fund of Fujian Province under Grant No. 2009J01275
文摘This paper researches end diffraction of slab waveguide and then matching efficiency between the far-field and its Gaussian approximate field is analyzed leads to a new definition of divergence half-angle. Finally, why the far-field can be approximated by a Gaussian function is presented according to characteristic of beam propagation factor.
基金Supported by the Program of Fujian Education Department under Grant No. JB09069the Natural Science Fund of Fujian Province under Grant No. 2009J01275
文摘The relation between diffractive beam parameters and normalized frequency is analyzed that leads to two improved Tormulas for two kinds of mode-field halT-widths and several formulas for divergence angle as well as beam propagation factor. The numerical calculation indicates that the maximal relative error is less than 0.5% within a reasonable parameter range.
