[Objective] This study aimed to screen a bacterial strain capable of producing bioflocculant. [Method] A bacterial strain T-11 capable of producing bioflocculant was isolated from activated sludge. Detailed tests on t...[Objective] This study aimed to screen a bacterial strain capable of producing bioflocculant. [Method] A bacterial strain T-11 capable of producing bioflocculant was isolated from activated sludge. Detailed tests on the morphological, physiological and biochemical characteristics were carried out and identification was performed to identify the strain. Finally, the bioflocculant was isolated and purified, and the flocculating activity and chemical characteristics were measured. [Result] It was identified as Serratia plumuthica based on its morphological, physiological and biochemical characteristics. This strain secreted flocculant best in a culture medium which included sucrose and NaNO3. The maximal cell growth was achieved within 10 h and the flocculating activity paralleled to it. It was found to be effective for flocculation of kaolin suspension, when added at a final concentration of 0.7 mg/L, over a range of pHs （2-7）, and temperature （approximately 30-80 ℃）. Chemical analysis indicated that the bioflocculant was an acidic polysaccharide consisting of glucose, glucuronic acid and galactose, talose and altrose. Infrared spectrum analysis also revealed typical characteristics of polysaccharides. [Conclusion] The biofloccu- lants produced by strain T-11 can greatly improve the ability of activated sludge to settle.展开更多
Zinc is one of the hazardous metals commonly found in municipal solid waste incineration （MSWI） ash, and this study reveals the stabilization mechanisms when sintering zinc-laden ash and ceramic precursors as a wast...Zinc is one of the hazardous metals commonly found in municipal solid waste incineration （MSWI） ash, and this study reveals the stabilization mechanisms when sintering zinc-laden ash and ceramic precursors as a waste-to-resource strategy. Using ZnO to simulate the zinc-laden ash and sintering with kaolinite and mullite ce- ramic precursors, both zinc aluminate spinel （ZnA1204） and willemite （Zn2SiO4） phases were found in the products under the tested thermal conditions. The results also indicate that kaolinite and mullite precursors exhibit different incorporation behavior, and ZnA1204 and Zn2SiO4 were found to be competitive as the Zn-hosting phases in the system. A prolonged leaching test was used to evaluate the leachability of potential product phases in the system. The concentrations of zinc in ZnO and Zn2SiO4 leachates were about two orders of magnitude higher than that in ZnA1204 leachate, indicating the preference of forming ZnA1204 for zinc stabilization. Furthermore, the alumi- num-rich sludge generated from waterworks could be beneficially used as a material resource to stabilize zinc in this study. The X-ray diffraction （XRD） pattern collected from the 1150 ~C and 3-h sintered sample shows the suc- cess of incorporating zinc into the ZnA1204 spinel structure with waterworks sludge precursor. The formation of ZnA1204 indicates a strong potential for employing aluminum- and silicon-based materials to thermally immobilize zinc and achieve the beneficial use of metal-laden MSWI ash.展开更多
We prepared cold-setting cement with metakaolin from kaolin dehydrated at 800 ℃ and phosphate, and studied the phase composition, microstructure and setting reaction mechanism of the cementing material by means of in...We prepared cold-setting cement with metakaolin from kaolin dehydrated at 800 ℃ and phosphate, and studied the phase composition, microstructure and setting reaction mechanism of the cementing material by means of infrared spectroscopy, thermogravimetry, X-ray diffraction, and scanning electron microscopy. The metakaolin-phosphate cement is predominantly amorphous, where the phases responsible for chemical setting are mainly amorphous aluminophosphate hydrates. The reactivity of metakaolin depends on the particle size. Metakaolin particles of 1.75 μm in D50 have an acid dissolution index up to 18.45%, and the reaction with phosphate at room temperature to form metakaolin-phosphate cement takes only 6 h. The so obtained cement shows a compressive strength of 92.5 MPa after 7 d and keeps its amorphous phase at 1 000 ℃, demonstrating better bonding and mechanical properties and higher stability at a medium or high temperature.展开更多
Simplified wave models- such as kinematic,diffusion and quasi-steady- are widely employed as a convenient replacement of the full dynamic one in the analysis of unsteady open-channel flows,and especially for flood rou...Simplified wave models- such as kinematic,diffusion and quasi-steady- are widely employed as a convenient replacement of the full dynamic one in the analysis of unsteady open-channel flows,and especially for flood routing.While their use may guarantee a significant reduction of the computational effort,it is mandatory to define the conditions in which they may be confidently applied.The present paper investigates the applicability conditions of the kinematic,diffusion and quasisteady dynamic shallow wave models for mud flows of power-law fluids.The power-law model describes in an adequate and convenient way fluids that at low shear rates fluids do not posses yield stress,such as clay or kaolin suspensions,which are frequently encountered in Chinese rivers.In the framework of a linear analysis,the propagation characteristics of a periodic perturbation of an initial steady uniform flow predicted by the simplified models are compared with those of the full dynamic one.Based on this comparison,applicability criteria for the different wave approximations for mud flood of power-law fluids are derived.The presented results provide guidelines for selecting the appropriate approximation for a given flow problem,and therefore they may represent a useful tool for engineering predictions.展开更多
Geopolymers of metakaolin and sodium silicate were synthesized respectively with the ratios of the amount of SiO2 in the sodium silica solution to that of Al2O3 in metakaolinite equal to 1.0, and 0.66. The geopolymeri...Geopolymers of metakaolin and sodium silicate were synthesized respectively with the ratios of the amount of SiO2 in the sodium silica solution to that of Al2O3 in metakaolinite equal to 1.0, and 0.66. The geopolymeric structures of the products were investigated by 27Al and 29Si solid-state nuclear magnetic resonances with magic-angle spinning (MAS NMR), Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), differential scanning colorimetry (DSC) and scanning electron microscopy (SEM). The reaction of the Al-O sheet in meakaolinite with low-order polymerized Si-O tetrahedral units such as monomer of SiO4 yields three-dimensional structures with the Q3 Si-O tetrahedral structure and the coordination of Al(IV) in the Al-O tetrahedral structure. The geopolymers are essentially X-ray amorphous. The assays by 27Al and 29Si NMR, FTIR confirm that the active structure in the metakaolinite is the sheet of Al-O with three coordination states.展开更多
Clay mineral assemblages in Shihezi Formation of Huaibei coal-bearing strata are determined by X-ray diffraction and Differential Thermal Analyzer, that is restated to the sediment faces and climatic changes in the so...Clay mineral assemblages in Shihezi Formation of Huaibei coal-bearing strata are determined by X-ray diffraction and Differential Thermal Analyzer, that is restated to the sediment faces and climatic changes in the source area, and to a lesser extent, alterations during burial diagenesis. In the Upper Shihezi Formation, the clay fraction is dominated by kaolinite in northern part of the coal field, which was formed in alluvial sediment environment. But in the South of Huaibei coal field, the clay mineral assemblage consists of mainly illite that reflects the influence of sea water. The predominately kaolinite and sederite composition of the clay fraction in the lower Shihezi Formation sediments documents less relief and gentle erosion of kaolinite rich soils developing under warm source area. In the lower part of Shihezi Formation, some chlorite is detected, which suggests transformation of illite or kaolinite to chlorite under conditions of burial diagenesis.展开更多
Peat bogs are regarded as one of the faithful archives of atmospheric polycyclic aromatic hydrocarbons(PAHs) deposition, and a large number of studies on PAHs accumulation in peatlands have been reported in Europe and...Peat bogs are regarded as one of the faithful archives of atmospheric polycyclic aromatic hydrocarbons(PAHs) deposition, and a large number of studies on PAHs accumulation in peatlands have been reported in Europe and North America. Comparatively little information is available on peat chronological records of atmospheric PAHs flux in China. We investigated the concentrations and historical accumulation rates of PAHs(AR PAHs) through geochemical analysis of three 210Pb-dated ombrotrophic peat cores from Great Hinggan Mountain, northeast China. Eight USEPA priority PAHs were detected and they are naphthalene(Nap), acenaphthylene(Acl), acenaphthene(Ace), fluorence(Flu), phenanthrene(Phe), anthracene(Ant), fluoranthene(Fla) and pyrene(Pyr), respectively. The average total eight PAHs(tPAHs) concentrations are 135.98- 262.43 μg kg-1 and the average AR tPAHs over the last two centuries are 96.45- 135.98 μg m-2 yr-1. The Ace, Acl and Phe account for 30.93- 54.04%, 25.29- 35.81%, and 9.14- 19.84% of the tPAHs, respectively, and have significant positive correlations with the tPAH. As a result, they are regarded as the iconic compounds of PAHs pollution in this area. A ca.200-yr atmospheric PAHs contamination history was reconstructed from the temporal sequences of bothconcentration and AR tPAHs, suggesting the variation of local environmental pollution. The main sources of the PAHs are identified by two isomer ratios as petrogenic origin including oil extraction and refining process as well as their combustions for industrial development. In addition, the contribution of coal combustion for industrial activities and resident heating could not be ignored. But prior to 1860, the undeveloped industry and most of agricultural activities might mainly account for the low level of PAHs, although it could infer a long-range input of atmospheric PAHs from other industrial areas. Therefore, there is a global implication to study longterm PAHs pollution records and all the results will provide practical significance in formulating policies to achieve sustainable and healthy development.展开更多
基金Supported by the Science Research Project of Qingdao Technical College in 2012(12-A-2)~~
文摘[Objective] This study aimed to screen a bacterial strain capable of producing bioflocculant. [Method] A bacterial strain T-11 capable of producing bioflocculant was isolated from activated sludge. Detailed tests on the morphological, physiological and biochemical characteristics were carried out and identification was performed to identify the strain. Finally, the bioflocculant was isolated and purified, and the flocculating activity and chemical characteristics were measured. [Result] It was identified as Serratia plumuthica based on its morphological, physiological and biochemical characteristics. This strain secreted flocculant best in a culture medium which included sucrose and NaNO3. The maximal cell growth was achieved within 10 h and the flocculating activity paralleled to it. It was found to be effective for flocculation of kaolin suspension, when added at a final concentration of 0.7 mg/L, over a range of pHs （2-7）, and temperature （approximately 30-80 ℃）. Chemical analysis indicated that the bioflocculant was an acidic polysaccharide consisting of glucose, glucuronic acid and galactose, talose and altrose. Infrared spectrum analysis also revealed typical characteristics of polysaccharides. [Conclusion] The biofloccu- lants produced by strain T-11 can greatly improve the ability of activated sludge to settle.
基金Supported by the General Research Fund Scheme(HKU 716809E,HKU 716310E)Special Equipment Grant(SEG_HKU10) of the Research Grants Council of Hong Kong
文摘Zinc is one of the hazardous metals commonly found in municipal solid waste incineration （MSWI） ash, and this study reveals the stabilization mechanisms when sintering zinc-laden ash and ceramic precursors as a waste-to-resource strategy. Using ZnO to simulate the zinc-laden ash and sintering with kaolinite and mullite ce- ramic precursors, both zinc aluminate spinel （ZnA1204） and willemite （Zn2SiO4） phases were found in the products under the tested thermal conditions. The results also indicate that kaolinite and mullite precursors exhibit different incorporation behavior, and ZnA1204 and Zn2SiO4 were found to be competitive as the Zn-hosting phases in the system. A prolonged leaching test was used to evaluate the leachability of potential product phases in the system. The concentrations of zinc in ZnO and Zn2SiO4 leachates were about two orders of magnitude higher than that in ZnA1204 leachate, indicating the preference of forming ZnA1204 for zinc stabilization. Furthermore, the alumi- num-rich sludge generated from waterworks could be beneficially used as a material resource to stabilize zinc in this study. The X-ray diffraction （XRD） pattern collected from the 1150 ~C and 3-h sintered sample shows the suc- cess of incorporating zinc into the ZnA1204 spinel structure with waterworks sludge precursor. The formation of ZnA1204 indicates a strong potential for employing aluminum- and silicon-based materials to thermally immobilize zinc and achieve the beneficial use of metal-laden MSWI ash.
基金Fankou Cement Company Limited, Dachang Construction Materials under the Contract No. 2004440003050237.
文摘We prepared cold-setting cement with metakaolin from kaolin dehydrated at 800 ℃ and phosphate, and studied the phase composition, microstructure and setting reaction mechanism of the cementing material by means of infrared spectroscopy, thermogravimetry, X-ray diffraction, and scanning electron microscopy. The metakaolin-phosphate cement is predominantly amorphous, where the phases responsible for chemical setting are mainly amorphous aluminophosphate hydrates. The reactivity of metakaolin depends on the particle size. Metakaolin particles of 1.75 μm in D50 have an acid dissolution index up to 18.45%, and the reaction with phosphate at room temperature to form metakaolin-phosphate cement takes only 6 h. The so obtained cement shows a compressive strength of 92.5 MPa after 7 d and keeps its amorphous phase at 1 000 ℃, demonstrating better bonding and mechanical properties and higher stability at a medium or high temperature.
文摘Simplified wave models- such as kinematic,diffusion and quasi-steady- are widely employed as a convenient replacement of the full dynamic one in the analysis of unsteady open-channel flows,and especially for flood routing.While their use may guarantee a significant reduction of the computational effort,it is mandatory to define the conditions in which they may be confidently applied.The present paper investigates the applicability conditions of the kinematic,diffusion and quasisteady dynamic shallow wave models for mud flows of power-law fluids.The power-law model describes in an adequate and convenient way fluids that at low shear rates fluids do not posses yield stress,such as clay or kaolin suspensions,which are frequently encountered in Chinese rivers.In the framework of a linear analysis,the propagation characteristics of a periodic perturbation of an initial steady uniform flow predicted by the simplified models are compared with those of the full dynamic one.Based on this comparison,applicability criteria for the different wave approximations for mud flood of power-law fluids are derived.The presented results provide guidelines for selecting the appropriate approximation for a given flow problem,and therefore they may represent a useful tool for engineering predictions.
文摘Geopolymers of metakaolin and sodium silicate were synthesized respectively with the ratios of the amount of SiO2 in the sodium silica solution to that of Al2O3 in metakaolinite equal to 1.0, and 0.66. The geopolymeric structures of the products were investigated by 27Al and 29Si solid-state nuclear magnetic resonances with magic-angle spinning (MAS NMR), Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), differential scanning colorimetry (DSC) and scanning electron microscopy (SEM). The reaction of the Al-O sheet in meakaolinite with low-order polymerized Si-O tetrahedral units such as monomer of SiO4 yields three-dimensional structures with the Q3 Si-O tetrahedral structure and the coordination of Al(IV) in the Al-O tetrahedral structure. The geopolymers are essentially X-ray amorphous. The assays by 27Al and 29Si NMR, FTIR confirm that the active structure in the metakaolinite is the sheet of Al-O with three coordination states.
文摘Clay mineral assemblages in Shihezi Formation of Huaibei coal-bearing strata are determined by X-ray diffraction and Differential Thermal Analyzer, that is restated to the sediment faces and climatic changes in the source area, and to a lesser extent, alterations during burial diagenesis. In the Upper Shihezi Formation, the clay fraction is dominated by kaolinite in northern part of the coal field, which was formed in alluvial sediment environment. But in the South of Huaibei coal field, the clay mineral assemblage consists of mainly illite that reflects the influence of sea water. The predominately kaolinite and sederite composition of the clay fraction in the lower Shihezi Formation sediments documents less relief and gentle erosion of kaolinite rich soils developing under warm source area. In the lower part of Shihezi Formation, some chlorite is detected, which suggests transformation of illite or kaolinite to chlorite under conditions of burial diagenesis.
基金funded by the National Natural Science Foundation of China(Grant No.4130121541271209)+1 种基金the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20131058)the National Basic Research Program of China(Grant No.2012CB956100)
文摘Peat bogs are regarded as one of the faithful archives of atmospheric polycyclic aromatic hydrocarbons(PAHs) deposition, and a large number of studies on PAHs accumulation in peatlands have been reported in Europe and North America. Comparatively little information is available on peat chronological records of atmospheric PAHs flux in China. We investigated the concentrations and historical accumulation rates of PAHs(AR PAHs) through geochemical analysis of three 210Pb-dated ombrotrophic peat cores from Great Hinggan Mountain, northeast China. Eight USEPA priority PAHs were detected and they are naphthalene(Nap), acenaphthylene(Acl), acenaphthene(Ace), fluorence(Flu), phenanthrene(Phe), anthracene(Ant), fluoranthene(Fla) and pyrene(Pyr), respectively. The average total eight PAHs(tPAHs) concentrations are 135.98- 262.43 μg kg-1 and the average AR tPAHs over the last two centuries are 96.45- 135.98 μg m-2 yr-1. The Ace, Acl and Phe account for 30.93- 54.04%, 25.29- 35.81%, and 9.14- 19.84% of the tPAHs, respectively, and have significant positive correlations with the tPAH. As a result, they are regarded as the iconic compounds of PAHs pollution in this area. A ca.200-yr atmospheric PAHs contamination history was reconstructed from the temporal sequences of bothconcentration and AR tPAHs, suggesting the variation of local environmental pollution. The main sources of the PAHs are identified by two isomer ratios as petrogenic origin including oil extraction and refining process as well as their combustions for industrial development. In addition, the contribution of coal combustion for industrial activities and resident heating could not be ignored. But prior to 1860, the undeveloped industry and most of agricultural activities might mainly account for the low level of PAHs, although it could infer a long-range input of atmospheric PAHs from other industrial areas. Therefore, there is a global implication to study longterm PAHs pollution records and all the results will provide practical significance in formulating policies to achieve sustainable and healthy development.
