人工挖孔桩流泥流砂处理

福建省人民政府办公大楼经比较采用人工挖孔桩基础 ,因遇严重流泥流砂层 ,无法继续施工。本文从技术、经济、工期角度分析了井点降水、钢护壁。

Effects of spillway types on debris flow trajectory and scour behind a sabo dam

Debris flows are one of the common natural hazards in mountainous areas.They often cause devastating damage to the lives and property of local people.The sabo dam construction along a debris flow valley is considered to be a useful method for hazard mitigation.Previous work has concentrated on the different types of sabo dams such as close-type sabo dam,open-type sabo dam.However,little attention has been paid to the spillway structure of sabo dam.In the paper,a new type of spillway structure with lateral contraction was proposed.Debris flow patterns under four different spillway structures were investigated.The projection theory was employed to predict trajectory of debris flow out from the spillway and to estimate the incident angle and terminal velocity before it plunged into the scour hole behind the sabo dam.The results indicated that the estimated data were in good agreement with the experimental ones.The discrepancy between the estimated and experimental values of main parameters remained below 21.82%(relative error).Additionally,the effects of debris flow scales under different spillway structures were considered to study the scour law.Although the debris flow pattern and scour law behind the sabo dam under different operating conditions was analyzed in this paper,further study on the scour mechanism andthe maximum scour depth estimation based on scour theory is still required in the future.

Experimental Study of Sediment Incipience Under Complex Flows

Sediment incipience under flows passing a backward-facing step was studied. A series of experiments were conducted to measure scouring depth, probability of sediment incipience, and instantaneous flow velocity field downstream of a backward-facing step. Instantaneous flow velocity fields were measured by using Particle Image Velocimetry (PIV), and an image processing method for determining probability of sediment incipience was employed to analyze the experimental data. The experimental results showed that the probability of sediment incipience was the highest near the reattachment point, even though the near-wall instantaneous flow velocity and the Reynolds stress were both much higher further downstream of the backward-facing step. The possible me- chanisms are discussed for the sediment incipience near the reattachment point.

Effects of Limestone Powder on Rheological Properties of Cement - Fly Ash Mortar

This article studies the effects of limestone powder on rheological properties of cement - fly ash mortar with RHEOLAB QC type rotation viscometer. The Bingham fluid model is introduced to fit the yielding stress and plastic viscosity of the mortar. The POWER LAW fluid model is introduced to fit the rheological index of the mortar. The results show that, adding limestone powder and fly ash to the cement mortar significantly decreases the yield stress of the mortar, changes the plastic viscosity of the mortar, increases the rheological index, decreases the degree of shear thinning of the mortar, and thereby improves the mortar＇ s workability. In the case of cement - fly ash mortar, with the increase of limestone powder content, both the yield stress and plastic viscosity of the mortar increase. When the limestone powder content is not higher than 14%, the increase of yield stress is not significant. When the limestone powder content is lower than 8%, the increase of plastic viscosity is not significant. When the content of limestone powder is higher than 22%, the rheological index of the mortar decreases and the degree of shear thinning increases. The effects of limestone powder＇ s packing density, shape and size, specific surface area, and fluid volume, are found to be the four major factors responsible for the changes ofrheological properties of the mortar.

Comparative Study on Debris Flow Initiation in Limestone and Sandstone Spoil

Large spoil tips from reconstruction works as a result of the Wenchuan Earthquake in China are new debris flow hazards to the human society.However,there is a lack of detailed comparative study on debris flow initiation in different spoil materials.This paper describes a series of tests and analyses on debris flow characteristics(initiation,scale and mechanism) at six sites with limestone and sandstone materials near the Dujiangyan area.Research shows the limestone spoil contains debris flow prone clay content with high concentration of montmorillonite(highly expandable).In addition,limestone spoil is of such a low permeability that water mainly concentrates in the upper surface layer.Those factors make it easy for the increase of pore water pressure,decline of internal friction and conhesion force,leading to the occurence of large debris flows.In contrast,the sandstone spoil is less problematic and causes no major debris flow threats.Based on our research on the mechanism,the"stereometric drainage"method is sucessfully applied to control limestone spoil debris flows.

Rheology of Cement Mortars with Crushed Fine Aggregates of Different Lithological Types

Crushed fine aggregates are widely used for full or partial replacement of natural sands in concretes. The crushed sands present different characteristics from the natural sand, especially if taking into account the content of microfine particle, the distribution of particle sizes, the shape features, besides the different lithological origin. From the rheological point of view, the crushed sands frequently provide mixtures with high yield stress, high viscosity, high cohesion and internal friction, which hinders its use in concrete. This study is focused on the evaluation of the rheological behavior of concrete mortar phase when using different lithological types of crushed sand in total replacement of natural sand. The lithological types surveyed were granite, calcitic limestone, dolomite limestone and mica schist. Each of these sand types was studied in two ways： in natura and with adjusted grading curve. The results show the best performance of calcitic limestone providing lower viscosities and lower yield stress in mortars.