泥的艺生-浅析硅藻泥废料的再利用

在现在的市场上,有形形色色的建筑材料,为了适合大众口味,环保一词人们越来越重视,硅藻泥就是在这个背景下被大家所熟知的。在硅藻泥的加工过程中稍微有一点的瑕疵,比如颜色、纹理等,这些都要算作不合格产品,由于硅藻泥的特性不可二次制作,很多硅藻泥转就变为了废料,但是在通过尝试和创作,将废料利用,在环保的基础上还可以实现它的价值转换。对于再利用的优势从自身特点,加工的艺术品特点等方面进行论述,以环保、再利用为目的,实现硅藻泥废料的合理利用,将其作为装饰、美观等原料,挖掘废料的利用价值以及应用范围,实现资源的高效利用与处理。

Comparative study of two biological nitrogen removal processes:A/O process and step-feeding process

Two biological nitrogen removal processes are compared in the aspect of nitrogen removal, process operation and energy saving. Results show that when the returned sludge ratio is 50% of the inflow rate, the step-feeding process achieves over 80% total nitrogen （TN） removal efficiency, but the TN removal efficiency of the A/O process is only 40%. Moreover, filamentous sludge bulking can be well restrained in the step-feeding process. Given the conditions of a returned sludge ratio of 100% and a nitrifying liquor recycle ratio of 200%, the TN removal efficiency is 78.32% in the A/O process, but the sludge volume index （SVI） value increases to 143 mL/g. In the step-feeding process, the SVI is only 94.4 mL/g when the TN removal efficiency reaches 81. 1%. The step-feeding process has distinct advantages over the A/O process in the aspects of practicability, nitrogen removal and operating stability.

Effect of Ferric Chloride on the Properties of Biological Sludge in Co-precipitation Phosphorus Removal Process

This paper studied the effect of ferric chloride on waste sludge digestion,dewatering and sedimentation under the optimized doses in co-precipitation phosphorus removal process.The experimental results showed that the concentration of mixed liquid suspended solid(MLSS) was 2436 mg.L-1 and 2385 mg.L-1 in co-precipitation phosphorus removal process(CPR) and biological phosphorous removal process(BPR),respectively.The sludge reduction ratio for each process was 22.6% and 24.6% in aerobic digestion,and 27.6% and 29.9% in anaerobic digestion,respectively.Due to the addition of chemical to the end of aeration tank,the sludge content of CPR was slightly higher than that of BPR,but the sludge reduction rate for both processes had no distinct difference.The sludge volume index(SVI) and sludge specific resistance of BPR were 126 ml.g-1 and 11.7×1012 m.kg-1,respectively,while those of CPR were only 98 ml.g-1 and 7.1×1012 m.kg-1,indicating that CPR chemical could improve sludge settling and dewatering.

Production of Biodiesel from Sludge Palm Oil by Esterification Process

Sludge palm oil （SPO） is an attractive feedstock and a significant raw material for biodiesel production. The use of SPO can lower the cost ofbiodiesel production significantly. In this study biodiesel fuel was produced from SPO by esterification process using P-toluenesulfonic acid （PTSA） as acid catalyst in different dosages in presence of methanol to convert free fatty acid （FFA） to fatty acid methyl ester （FAME）. Batch esterification process of SPO was carried out to study the influence of PTSA dosage （0.25-10% wt/wt）, molar ratio of methanol to SPO （6：1-20：1）, temperature （40-80 ℃）, reaction time （30-120 min）. The effects of those parameters on the yield of crude biodiesel and conversion of FFA to FAME were monitored. The optimum condition for batch esterification process was 0.75% wt/wt, 10：1 molar ratio, 60 ℃ temperature and 60 minutes reaction time.

Innovative Production of PCMs （Phase Change Materials） Preparation by Vacuum Impregnation： Mechanical Strength of Mortars Cement with Composite PCMs Content

An experimental investigation was conducted to study the efficiency of thermal insulation of composite PCMs （phase change materials） produced by vacuum impregnation process between paraffin （PCMs） and fly ash particles. DSC （differential scanning calorimeter） has been used to determine the thermal properties of latent heat of melting and heat capacity for composite PCMs. Vacuum impregnation pressure of 40 in.Hg, paraffin melting temperature of 90℃, vacuum time and impregnation time of paraffin of 30 min are the optimum condition of composite PCMs productions. The values of latent heat of melting and heat capacity are 74.00 J/g and 15.726 J/g.℃ for composite PCMs that produces by the optimum condition in vacuum impregnation process. Increasing the amount of composite PCMs replacing for cement in mortars causes the compressive strength, flexural strength and tensile strength reduction. Compressive strength, flexural strength and tensile strength of mortar with and without composite PCMs can be increased by the longer time of water curing for mortar specimens. Thermal conductivity （k） of mortar cement is reduced by increasing the amount of composite PCMs which replaced for cement in mortar plate compositions. Composite PCMs have the efficiency for thermal energy insulation when incorporated into the buildings. Therefore, this property of paraffin/fly ash composites PCMs can reduce the energy consumption for temperature control in the buildings.