Water hydraulic systems have provoked major interest because of the human friendly and environmental safety aspects. Piston pump is one of the most frequently used hydraulic units in recent engineering technique. In w...Water hydraulic systems have provoked major interest because of the human friendly and environmental safety aspects. Piston pump is one of the most frequently used hydraulic units in recent engineering technique. In water hydraulic piston pump, poor lubrication is more likely to happen than in oil hydraulic one because of difference in properties between water and oil. So there are some key problems such as corrosive wear and erosion, which are investigated briefly. Many new materials have been developed, which give longer life expectancies with water without corrosion and erosion. A new type of seawater hydraulic piston pumps with better suction characteristics had been developed at HUST. Much of this research has concentrated on new materials, structure and experiments, which are also specially introduced.展开更多
The single cylinder and multi-cylinder pumping dynamics model of a swash plate piston pump were improved.Particular attention has been paid to the design influences of key parts of the valve plate such as relief groov...The single cylinder and multi-cylinder pumping dynamics model of a swash plate piston pump were improved.Particular attention has been paid to the design influences of key parts of the valve plate such as relief groove,pre-compression/ expansion and fluid inertia effect of the unsteady flow.Some important parameters,such as the discharge area,discharge coefficient,fluid bulk modulus,were especially analyzed using numerical methods or by experiment-based estimation.Consequently,the mathematical results of pressure pulsation and flow ripple agree well with experimental results from the test-rig of the flow ripple.Therefore,the cross angle and the pre-compression angle of the valve plate was optimized,based on the pumping dynamics model.Considering both the flow ripple and the cylinder pressure of the pump,the cross angle is set to be 2.2° to 2.7° with a pre-compression angle of 1.7° to 2.2°,so the pumping dynamics character can obtain the best result.展开更多
文摘Water hydraulic systems have provoked major interest because of the human friendly and environmental safety aspects. Piston pump is one of the most frequently used hydraulic units in recent engineering technique. In water hydraulic piston pump, poor lubrication is more likely to happen than in oil hydraulic one because of difference in properties between water and oil. So there are some key problems such as corrosive wear and erosion, which are investigated briefly. Many new materials have been developed, which give longer life expectancies with water without corrosion and erosion. A new type of seawater hydraulic piston pumps with better suction characteristics had been developed at HUST. Much of this research has concentrated on new materials, structure and experiments, which are also specially introduced.
基金Project supported by the National Key Technologies Supporting Program of China during the 11th Five-Year Plan Period (Nos. 2006BAF01B01, 2006BAF01B04, and 2007AA03Z211)the National Natural Science Foundation of China (No. 50877070)the Technological Research and Development Programs of the Min-istry of Chinese Railways (No. 2009J006-L)
文摘The single cylinder and multi-cylinder pumping dynamics model of a swash plate piston pump were improved.Particular attention has been paid to the design influences of key parts of the valve plate such as relief groove,pre-compression/ expansion and fluid inertia effect of the unsteady flow.Some important parameters,such as the discharge area,discharge coefficient,fluid bulk modulus,were especially analyzed using numerical methods or by experiment-based estimation.Consequently,the mathematical results of pressure pulsation and flow ripple agree well with experimental results from the test-rig of the flow ripple.Therefore,the cross angle and the pre-compression angle of the valve plate was optimized,based on the pumping dynamics model.Considering both the flow ripple and the cylinder pressure of the pump,the cross angle is set to be 2.2° to 2.7° with a pre-compression angle of 1.7° to 2.2°,so the pumping dynamics character can obtain the best result.
