A novel zinc-rich pigment based on P(St-BA-MAA-SPAA) nano-latex was obtained, which is suitable for the use in hot alkali liquid medium. The nano-latex was synthesized by active emulsifier latex polymerization method ...A novel zinc-rich pigment based on P(St-BA-MAA-SPAA) nano-latex was obtained, which is suitable for the use in hot alkali liquid medium. The nano-latex was synthesized by active emulsifier latex polymerization method with monomers of styrene (St), butylacrylate (BA), methylacrylic acid(MAA) in the presence of active emulsifier 3-sulfopropylacrylate(SPAA). The synthesis condition and properties of the latex were investigated. And the anti-corrosive property of the resultant zinc-rich coating was studied. The results show that the nano-latex is self-stabilized and has a narrow particle diameter distribution, the average diameter of the latex particles is 71 nm. Zinc powders can be evenly dispersed in the nano-latex, which indicates that the P(St-BA-MAA-SPAA) nano latex can be used as the binder of zinc-rich coating. The resultant zinc-rich coating is able to resist the invasion of hot alkali solution(the temperature is 95 ℃ and the pH value is 14) for 480 h and the exposure time in salt spray is 1 200 h. Moreover, the coating shows good thermal conductivity and static electricity properties, its thermal conductivity and electric resistivity are 21-37 W/(m·K) and 6.7×105-3.5×106 Ω·cm, respectively.展开更多
The paraffin wax microemulsion was prepared from fully refined paraffin wax No.58-60 in the presence of a nonionic surfactant and an anionic surfactant.The influence of manufacturing parameters on the particle diamete...The paraffin wax microemulsion was prepared from fully refined paraffin wax No.58-60 in the presence of a nonionic surfactant and an anionic surfactant.The influence of manufacturing parameters on the particle diameter of paraffin wax microemulsion included the quantity of the emulsifier,the temperature and emulsification time,the stirring speed,the pH value and the auxiliary ingredient(cosurfactant).The test results showed that the temperature of emulsification had little effect on the particle size of paraffin wax microemulsion in a temperature range of 75-85 ℃.Other manufacturing parameters all had a great effect on the particle size of paraffin wax microemulsion.The optimum preparation conditions included:a w(emulsifier) of 6%,an emulsification temperature of 80 ℃,an emulsification time of 40 min,a pH value of about 8,and a stirring speed of 600 r/min,with n-amyl alcohol serving as the co-surfactant.Under these conditions,a translucent and baby blue paraffin wax emulsion was prepared with its particle size equating to 97 nm.展开更多
Microemulsions of both O/W and W/O types were formulated by using Brij76, Brij97 and Tween80 as nonionic surfactant and propanol or butanol as cosurfactant with isopropyl myristate oil and water. Low concentrations of...Microemulsions of both O/W and W/O types were formulated by using Brij76, Brij97 and Tween80 as nonionic surfactant and propanol or butanol as cosurfactant with isopropyl myristate oil and water. Low concentrations of sodium salts of hexanoic, decanoic, palmitic and stearic acids were added to the prepared microemulsions to assess their ability to enhance microemulsion stability. Solubilization capacity of microemulsions was estimated and compared with their conductivities at the same water content. Solubilization capacity for YweenS0-containing microemulsions was found to be lower than that of Brij containing microemulsions. Different effects of the ionic surfactants at the maximum solubilization capacity were observed in both O/W and W/O microemulsions. Microemulsion conductivity results showed that different ionic surfactants exerted minor and comparable effects regardless to the implemented nonionic surfactant. Analysis of solubilization conductivity revealed that the presence of ionic surfactant can improve microemulsion solubilization capacity and provided that optimum physicochemical properties for both surfactants are fulfilled. These properties have direct impact at the goodness of the interracial film.展开更多
A novel surface active monomer （surfmer） containing poly（ethylene glycol） chain and terminated phosphate group was synthesized. The copolymerization of synthesized surfmer with NVP （N-vinylpyrrolidone） and with ...A novel surface active monomer （surfmer） containing poly（ethylene glycol） chain and terminated phosphate group was synthesized. The copolymerization of synthesized surfmer with NVP （N-vinylpyrrolidone） and with NVP and VEP （5-tert-butylperoxy-5-methyl-2-hexene-3-yne monomer） led to formation of corresponding surface-active copolymers. The capability of application of resulted copolymers as surface active macroinitiators of emulsion polymerization of styrene and as components of polymeric scaffolds was investigated.展开更多
Removal of vegetal oil from wastewater using comercial resins in batch reactors processes is studied in present study. A traditional and patented type of three different surfactants was used for stabilizing of the emu...Removal of vegetal oil from wastewater using comercial resins in batch reactors processes is studied in present study. A traditional and patented type of three different surfactants was used for stabilizing of the emulsion phase. The results for the emulsion made by the synthesized surfactant showed much better stability and performance in the separation process compared to that by conventionally used Span 80. To determine the optimum operation conditions, the effect of several parameters such as initial oil concentration, amount of resin in the solid phase, adding or not a surfactant, resin type, and stabilizer concentration have been investigated. It was found that under the optimum conditions, more than 98% ofoil can be removed in a single batch process.展开更多
文摘A novel zinc-rich pigment based on P(St-BA-MAA-SPAA) nano-latex was obtained, which is suitable for the use in hot alkali liquid medium. The nano-latex was synthesized by active emulsifier latex polymerization method with monomers of styrene (St), butylacrylate (BA), methylacrylic acid(MAA) in the presence of active emulsifier 3-sulfopropylacrylate(SPAA). The synthesis condition and properties of the latex were investigated. And the anti-corrosive property of the resultant zinc-rich coating was studied. The results show that the nano-latex is self-stabilized and has a narrow particle diameter distribution, the average diameter of the latex particles is 71 nm. Zinc powders can be evenly dispersed in the nano-latex, which indicates that the P(St-BA-MAA-SPAA) nano latex can be used as the binder of zinc-rich coating. The resultant zinc-rich coating is able to resist the invasion of hot alkali solution(the temperature is 95 ℃ and the pH value is 14) for 480 h and the exposure time in salt spray is 1 200 h. Moreover, the coating shows good thermal conductivity and static electricity properties, its thermal conductivity and electric resistivity are 21-37 W/(m·K) and 6.7×105-3.5×106 Ω·cm, respectively.
基金supported by The National Natural Science Funds (Project No. 21076025)
文摘The paraffin wax microemulsion was prepared from fully refined paraffin wax No.58-60 in the presence of a nonionic surfactant and an anionic surfactant.The influence of manufacturing parameters on the particle diameter of paraffin wax microemulsion included the quantity of the emulsifier,the temperature and emulsification time,the stirring speed,the pH value and the auxiliary ingredient(cosurfactant).The test results showed that the temperature of emulsification had little effect on the particle size of paraffin wax microemulsion in a temperature range of 75-85 ℃.Other manufacturing parameters all had a great effect on the particle size of paraffin wax microemulsion.The optimum preparation conditions included:a w(emulsifier) of 6%,an emulsification temperature of 80 ℃,an emulsification time of 40 min,a pH value of about 8,and a stirring speed of 600 r/min,with n-amyl alcohol serving as the co-surfactant.Under these conditions,a translucent and baby blue paraffin wax emulsion was prepared with its particle size equating to 97 nm.
文摘Microemulsions of both O/W and W/O types were formulated by using Brij76, Brij97 and Tween80 as nonionic surfactant and propanol or butanol as cosurfactant with isopropyl myristate oil and water. Low concentrations of sodium salts of hexanoic, decanoic, palmitic and stearic acids were added to the prepared microemulsions to assess their ability to enhance microemulsion stability. Solubilization capacity of microemulsions was estimated and compared with their conductivities at the same water content. Solubilization capacity for YweenS0-containing microemulsions was found to be lower than that of Brij containing microemulsions. Different effects of the ionic surfactants at the maximum solubilization capacity were observed in both O/W and W/O microemulsions. Microemulsion conductivity results showed that different ionic surfactants exerted minor and comparable effects regardless to the implemented nonionic surfactant. Analysis of solubilization conductivity revealed that the presence of ionic surfactant can improve microemulsion solubilization capacity and provided that optimum physicochemical properties for both surfactants are fulfilled. These properties have direct impact at the goodness of the interracial film.
文摘A novel surface active monomer （surfmer） containing poly（ethylene glycol） chain and terminated phosphate group was synthesized. The copolymerization of synthesized surfmer with NVP （N-vinylpyrrolidone） and with NVP and VEP （5-tert-butylperoxy-5-methyl-2-hexene-3-yne monomer） led to formation of corresponding surface-active copolymers. The capability of application of resulted copolymers as surface active macroinitiators of emulsion polymerization of styrene and as components of polymeric scaffolds was investigated.
文摘Removal of vegetal oil from wastewater using comercial resins in batch reactors processes is studied in present study. A traditional and patented type of three different surfactants was used for stabilizing of the emulsion phase. The results for the emulsion made by the synthesized surfactant showed much better stability and performance in the separation process compared to that by conventionally used Span 80. To determine the optimum operation conditions, the effect of several parameters such as initial oil concentration, amount of resin in the solid phase, adding or not a surfactant, resin type, and stabilizer concentration have been investigated. It was found that under the optimum conditions, more than 98% ofoil can be removed in a single batch process.
