Adsorption equilibria of CH_4 and N_2 on activated carbon andsilica gel were measured for a wide temperature range covering thecritical point: 158-298 K for CH_4, and 103-298 K for N_2. Thedetermination of the compres...Adsorption equilibria of CH_4 and N_2 on activated carbon andsilica gel were measured for a wide temperature range covering thecritical point: 158-298 K for CH_4, and 103-298 K for N_2. Thedetermination of the compressibility factor is shown to haveconsiderable effect on isotherm behavior at conditions after theisotherm maximum. A change in adsorption mechanisms on crossing thecritical temperature was observed in all cases. The kind ofadsorbents and how far the equilibrium temperature to the criticalone are major factors affecting the Transition of isotherms from sub-to supercritical.展开更多
A novel halogen-free phosphorus–nitrogen–silicon flame retardant monomer with reactive siloxy groups,N-(diphenylphosphino)-1,1-diphenyl-N-(3-(triethoxysilyl)propyl) phosphinamine(DPTA) has been synthesized and was a...A novel halogen-free phosphorus–nitrogen–silicon flame retardant monomer with reactive siloxy groups,N-(diphenylphosphino)-1,1-diphenyl-N-(3-(triethoxysilyl)propyl) phosphinamine(DPTA) has been synthesized and was applied to the fire-resistant finishing of cotton fabrics. The molecular structure of DPTA has been well characterized by elemental analysis, FTIR,1H NMR, and ^(31)P NMR spectroscopies. The chemically-grafted cotton fabrics, which were treated with 25 wt% DPTA, were obtained and confirmed by attenuated total reflectance Fourier infrared spectroscopy(ATR-FTIR). The flame retardancy and thermal property of the treated samples were investigated by limited oxygen index(LOI), vertical flammability test(VFT), thermogravimetric analysis(TGA) and microscale combustion calorimeter(MCC). It is noted that in vertical flammability test, the treated samples extinguished immediately upon removing the ignition source, whereas the untreated one was completely burned out. Furthermore, TGA and MCC tests revealed that the treated samples produced a high char formation and a low heated release during combustion. The surface morphology of the untreated and treated samples and the char residues after LOI tests were observed by scanning electron microscopy(SEM). Therefore, all the results showed that the treated cotton fabrics with 25 wt% DPTA apparently improved the fireresistant and thermal performances.展开更多
Effects of silylation on surface properties and catalytic performance of Zn-IM5 for butane aromatization were studied in this paper. Collidine-IR and NH3-TPD analyses revealed that the silylation treatment not only de...Effects of silylation on surface properties and catalytic performance of Zn-IM5 for butane aromatization were studied in this paper. Collidine-IR and NH3-TPD analyses revealed that the silylation treatment not only decreased the quantity of both strong and weak acid sites but also led to a slightly reduced intensity of weak acidity. Silylation of the catalyst promoted the selectivity of BTX by narrowing the channel and cutting the acidity. The effect of temperature of silylation and amount of Si loading were evaluated. The best condition has specified a temperature of 50 ℃ and a SiO_2 loading of 4.0%.展开更多
基金Supported by the Special Funds of Major State Basic Research Projects (G2000026404) and the National Natural Science Foundation of China (No. 29936100).
文摘Adsorption equilibria of CH_4 and N_2 on activated carbon andsilica gel were measured for a wide temperature range covering thecritical point: 158-298 K for CH_4, and 103-298 K for N_2. Thedetermination of the compressibility factor is shown to haveconsiderable effect on isotherm behavior at conditions after theisotherm maximum. A change in adsorption mechanisms on crossing thecritical temperature was observed in all cases. The kind ofadsorbents and how far the equilibrium temperature to the criticalone are major factors affecting the Transition of isotherms from sub-to supercritical.
基金Supported by the National Natural Science Foundation of China(21301160)
文摘A novel halogen-free phosphorus–nitrogen–silicon flame retardant monomer with reactive siloxy groups,N-(diphenylphosphino)-1,1-diphenyl-N-(3-(triethoxysilyl)propyl) phosphinamine(DPTA) has been synthesized and was applied to the fire-resistant finishing of cotton fabrics. The molecular structure of DPTA has been well characterized by elemental analysis, FTIR,1H NMR, and ^(31)P NMR spectroscopies. The chemically-grafted cotton fabrics, which were treated with 25 wt% DPTA, were obtained and confirmed by attenuated total reflectance Fourier infrared spectroscopy(ATR-FTIR). The flame retardancy and thermal property of the treated samples were investigated by limited oxygen index(LOI), vertical flammability test(VFT), thermogravimetric analysis(TGA) and microscale combustion calorimeter(MCC). It is noted that in vertical flammability test, the treated samples extinguished immediately upon removing the ignition source, whereas the untreated one was completely burned out. Furthermore, TGA and MCC tests revealed that the treated samples produced a high char formation and a low heated release during combustion. The surface morphology of the untreated and treated samples and the char residues after LOI tests were observed by scanning electron microscopy(SEM). Therefore, all the results showed that the treated cotton fabrics with 25 wt% DPTA apparently improved the fireresistant and thermal performances.
基金financially supported by the Opening Project of the State Key Laboratory of Catalytic Material and Reaction Engineering of Sinopec Research Institute of Petroleum Processing. (No. 33600000-14-ZC0607-0010)
文摘Effects of silylation on surface properties and catalytic performance of Zn-IM5 for butane aromatization were studied in this paper. Collidine-IR and NH3-TPD analyses revealed that the silylation treatment not only decreased the quantity of both strong and weak acid sites but also led to a slightly reduced intensity of weak acidity. Silylation of the catalyst promoted the selectivity of BTX by narrowing the channel and cutting the acidity. The effect of temperature of silylation and amount of Si loading were evaluated. The best condition has specified a temperature of 50 ℃ and a SiO_2 loading of 4.0%.
