换热关联式中流体定性温度的确定

在介绍两种常见边界条件下流体定性温度确定方法的基础上,提出了一种用积分平均温度确定流体定性温度的方法,这种方法对确定进出口温差比较大的流体物性有更高的精确度。

An Experimental Study on Nanofluids Convective Heat Transfer Through a Straight Tube under Constant Heat Flux

In this work, the laminar convective heat transfer performance and the pressure drop of water-based nanofluids containing Al2O3, TiO2 and SiO2 nanoparticles flowing through a straight circular tube were experimentally investigated. The experimental results showed that addition of small amounts of nano-sized Al2O3 and TiO2 particles to de-ionized water increased heat transfer coefficients considerably, while the SiO2 nanofluids showed the opposite behavior attracting the authors' interests. An average of 16% and 8.2% increase in heat transfer coefficient were observed with the average of 28% and 15% penalty in pressure drop for Al2O3 and TiO2 nanofluids.

An extended iterative direct-forcing immersed boundary method in thermo-fluid problems with Dirichlet or Neumann boundary conditions

An iterative direct-forcing immersed boundary method is extended and used to solve convection heat transfer problems.The pressure,momentum source,and heat source at immersed boundary points are calculated simultaneously to achieve the best coupling.Solutions of convection heat transfer problems with both Dirichlet and Neumann boundary conditions are presented.Two approaches for the implementation of Neumann boundary condition,i.e.direct and indirect methods,are introduced and compared in terms of accuracy and computational efficiency.Validation test cases include forced convection on a heated cylinder in an unbounded flow field and mixed convection around a circular body in a lid-driven cavity.Furthermore,the proposed method is applied to study the mixed convection around a heated rotating cylinder in a square enclosure with both iso-heat flux and iso-thermal boundary conditions.Computational results show that the order of accuracy of the indirect method is less than the direct method.However,the indirect method takes less computational time both in terms of the implementation of the boundary condition and the post processing time required to compute the heat transfer variables such as the Nusselt number.It is concluded that the iterative direct-forcing immersed boundary method is a powerful technique for the solution of convection heat transfer problems with stationary/moving boundaries and various boundary conditions.

Optimization of natural convection heat transfer of Newtonian nanofluids in a cylindrical enclosure

This study characterizes and optimizes natural convection heat transfer of two Newtonian Al2O3 and Ti O2/water nano fluids in a cylindrical enclosure. Nusselt number(Nu) of nano fluids in relation to Rayleigh number(Ra) for different concentrations of nano fluids is investigated at different con figurations and orientations of the enclosure.Results show that adding nanoparticles to water has a negligible or even adverse in fluence upon natural convection heat transfer of water: only a slight increase in natural convection heat transfer of Al2O3/water is observed,while natural convection heat transfer for TiO2/water nano fluid is inferior to that for the base fluid. Results also reveal that at low Ra, the likelihood of enhancement in natural convection heat transfer is more than at high Ra: at low Ra, inclination angle, aspect ratio of the enclosure and nanoparticle concentration in fluence natural convection heat transfer more pronouncedly than that in high Ra.

Natural Convection of Nanofluid in Cylindrical Enclosure Filled with Porous Media

A numerical study has been carried out to investigate the effect of aspect ratio on heat transfer by natural convection of nanofluid taking Cu nano particles and the water as based fluid. The flow is laminar, steady state, axisymmetric two-dimensional in a vertical cylindrical channel filled with porous media. Heat is generated uniformly along the center of the channel with its vertical surface remain with cooled constant wall temperature and insulated horizontal top and bottom surfaces. The governing equations which used are continuity, momentum and energy equations using Darcy law and Boussinesq＇s approximation which are transformed to dimensionless equations. The finite difference approach is used to obtain all the computational results using the MATLAB-7 program. The parameters affected on the system are Rayleigh number ranging within （10≤ Ra ≤ 103）, aspect ratio （1 ≤ As 〈 5） and the volume fraction （0 ≤0 〈 0.2）. The results obtained are presented graphically in the form of streamline and isotherm contour plots and the results show that as ~ increase from 0.01 to 0.2 the value of the mean Nusselt number increase 50.4% for Ra = 1,000.

Design of High-Speed PM Synchronous Motor Thermal and Mechanical Analyzes Study for Aerospace Retraction Wheel Motor Application

A 3-D modeling of FEA （finite element analysis） design provides for high-speed synchronous with PMs （permanent magnets） applied in aerospace application will be examined under design considerations ofn = 12,000 rpm, short-duty operation, and etc. for an ARWM （aerospace retraction wheel motor）. First, lumped-elements will be fine-tuned following numerical method results is reported steady-state and transient solutions. Besides, the equations of thermal modeling such as Re, N,,, G,. and Pr numbers in order to calculate heat-transfer coefficient of convection on the rotor and stator surfaces in the air-gap have calculated. This section illustrates the temperature distribution of each point in a clear view. By CFD （fluid dynamic analysis） analysis, the fluid dynamics were modeled, pressure and velocity streamlines of cooling-flow have analyzed. An optimization algorithm was derived in order to have optimized number of water-channels as well. Second, calculation of nodal and tangential forces which deal with mechanical stresses of the ARWM have represented. The paper discusses an accurate magnetic-field analysis that addresses equivalent stress distribution in the magnetic core through using the transient FEA to estimate motor characteristics. The whole model shear and normal mechanical stresses and total deformation oftbe ARWM has been investigated by transient FEA. The end-winding effects were included by the authors.

高真空热泵双效浓缩机组的研制及其节能分析

介绍一种利用高真空"喷雾传质式冷凝器"与热泵双效配套的浓缩机组。