振动流化床的流化与减振设计

振动流化床在化工中有很重要应用 ,本文在分析了振动流化床振动特性基础上 ,按流化床技术指标要求 ,计算出了垂直和水平方向的弹簧刚度系数和阻力系数 ,结果表明 ,振动流化床性能良好。

粉末涂料的流态化特征及流化床设计

通过试验和观察,研究了粉末涂料的流态化特征,提出了粉末涂料流态化质量的评价方法。从改善粉末涂料流态化质量出发,对粉末颗粒生产提出要求,介绍了流化床设计中的注意事项。

VFB-1000型振动流化床的设计及应用

以ＶＦＢ－１０００型振动流化床为例，介绍了振动流化床在设计与应用过程中应注意的几个问题。实际应用效果良好。

家用变频空调室外机控制器PFC电路设计

PFC电路是家用变频空调室外机控制器基本的单元电路之一,根据控制电路的不同,分为无源和有源PFC两大类,有源PFC电路因其优点多而得到很好的发展。目前,有源PFC的整流滤波电路通常用少量大容值的铝电解电容组成,存在成本高和寿命短的问题。本论文介绍一种新的有源PFC高压整流滤波电路,它由多数量小容值铝电解电容并联组成,辅以电流均流化设计,有效降低电容的ESR值,减小电容的发热,提升控制器寿命。

造纸黑液循环流化床锅炉技术分析

文章分析了利用循环流化床锅炉燃烧技术处理制浆所产生的黑液污染问题的可行性及其应用情况,对国内造纸行业的治污技术具有一定的推广应用价值。

Integrated logistics facilities network design for 3PLS under uncertainty

According to the operational characteristics of the logistics networks for the third party logistics supplier （3PLS）, the forward and reverse logistics networks together for 3PLS under the uncertain environment are designed. First, a fuzzy model is proposed by taking multiple customers, multiple commodities, capacitated facility location and integrated logistics facility layout into account. In the model, the fuzzy customer demands and transportation rates are illustrated by triangular fuzzy numbers. Secondly, the fuzzy model is converted into a crisp model by applying fuzzy chance constrained theory and possibility theory, and one hybrid genetic algorithm is designed for the crisp model. Finally, two different examples are designed to illustrate that the model and solution discussed are valid.

Influence of Design Margin on Operation Optimization and Control Performance of Chemical Processes

Operation optimization is an effective method to explore potential economic benefits for existing plants. The m.aximum potential benefit from operationoptimization is determined by the distances between current operating point and process constraints, which is related to the margins of design variables. Because of various ciisturbances in chemical processes, some distances must be reserved for fluctuations of process variables and the optimum operating point is not on some process constraints. Thus the benefit of steady-state optimization can not be fully achied（ed while that of dynamic optimization can be really achieved. In this study, the steady-state optimizationand dynamic optimization are used, and the potential benefit-is divided into achievable benefit for profit and unachievable benefit for control. The fluid catalytic cracking unit （FCCU） is used for case study. With the analysis on how the margins of design variables influence the economic benefit and control performance, the bottlenecks of process design are found and appropriate control structure can be selected.

Optimal design of auxiliary-teeth to solve circulation current reduction of permanent magnet linear synchronous motor

A discontinuity of magnetic circuits according to the end effect is generated in the permanent magnet linear synchronous motor （PMLSM）. Due to the unbalanced back electro-motive force （EMF） and impedance produced, unbalanced current is generated. The cireulatin8 current, which is caused by a decrease in the thrust, is generated by the unbalanced current. The optimal design of auxiliary-teeth at the end of the mover was carried out to solve the unbalance of phase by using design of experiment （DOE）, and compared with the basic model through finite element analysis （FEA）. As a result, the auxiliary-teeth model compensates for the decrease of thrust caused by the unbalanced phase. Also, this model is proven to reduce the detent force by the vibration and noise of the PMLSM and copper loss caused by the circulating current.

An Optimization Study on Electrodeposition of Copper from Acid Bath with Supercritical Carbon Dioxide Fluid

Abstract： An optimization study on electrodeposition of copper film from sulfuric acid bath in presence of supercritical carbon dioxide fluid was explored for electronic application. Factors that influence roughness of copper deposit were also discussed. A material property of copper deposition has been considered as a response variable and statistical experimental methods have been used to optimize the process parameters and the response. Effects of various current density, pressure and temperature were investigated to select the optimal operation factors. Scanning electron microscopy and atomic force microscopy were applied to determine average particle sizes and to confirm the characteristic of the metallic film obtained. Box-Behnken design and RSM （response surface methodology） were applied to find the optimal conditions of supercritical electroplating process. Regression model was built by fitting the experimental results with a second-order polynomial and was proved to be statistically significant since the coefficient of determination coefficient （R^2） was 0.9844. The optimal film of deposited can be obtained at current density 0.17 A/dm^2, pressure 186 bar and temperature 31.5 ℃.

Simulation and Design Optimization of Ammonia Synthesis Converter

One-dimensional pseudo-homogeneous model of an axial flow converter and one-dimensional heteroge-neous model of a horizontal converter have been presented, which describe the distribution of gaseous composition,temperature and pressure along the height in the two converters, respectively. Design optimization methods of the two converters have been proposed, by which the minimum catalyst volume can be obtained to satisfy the productive capacity of 1000 tons per day, when the operating pressure is 15.0, 10.0 and 7.5 MPa, respectively.

Hydrodynamics research of wastewater treatment bioreactors

To optimize the design and improve the performance of wastewater treatment bioreactors,the review concerning the hydrodynamics explored by theoretical equations,process experiments,modeling of the hydrodynamics and flow field measurement is presented. Results of different kinds of experiments show that the hydrodynamic characteristics can affect sludge characteristics,mass transfer and reactor performance significantly. Along with the development of theoretical equations,turbulence models including large eddy simulation models and Reynolds-averaged Navier-Stokes (RANS) models are widely used at present. Standard and modified k-ε models are the most widely used eddy viscosity turbulence models for simulating flows in bioreactors. Numerical simulation of hydrodynamics is proved to be efficient for optimizing design and operation. The development of measurement techniques with high accuracy and low intrusion enables the flow filed in the bioreactors to be transparent. Integration of both numerical simulation and experimental measurement can describe the hydrodynamics very well.

The Analysis of Distillation Tray Column Efficiency by Fluid Dynamics and Mass Transfer Computation

It has long been found that the flow pattern of the liquid phase on distillation tray is of great importance on distillation process performance. But until now, there was very few published work on quantitative investigation of this subject. By combining the computational fluid dynamics (CFD) with the mass transfer equation, a theoretical model is proposed for predicting the details of velocity and concentration distributions as well as the tray efficiency of distillation tray column. Using the proposed model, four different cases corresponding to different assumptions of liquid and vapor flowing condition for a distillation tray column were investigated. In Case I, the distributions of velocity and concentration of the incoming liquid from the downcomer and the uprising vapor from the underneath tray spacing are uniform. In Case n, the distribution of the incoming liquid is non-uniform but the uprising vapor is uniform. In Case HI, the distribution of the incoming liquid is uniform but the uprising vapor is non-uniform. In Case IV, the distributions of both the incoming liquid and the uprising vapor are non-uniform. The details of velocity and concentration distributions on a multiple sieve tray distillation column in four different cases were simulated using the proposed model. It is found that the shape of the simulated concentration profiles of vapor and the liquid is quite different from case to case. The computed results also show that the tray efficiency is highly reduced by the maldistribution of velocity and concentration of the incoming liquid and uprising vapor. The tray efficiency for Case I is higher than Case Ⅱ or Case Ⅲ, and that for Case Ⅳ is the lowest. It also reveals that the accumulated effect of maldistribution becomes more pronounced when the number of column trays increased. The present study demonstrates that the use of computational method to predict the mass transfer efficiency for the tray column, especially for the large one, is feasible.

Design and Implementation of Cloud Platform for Intelligent Logistics in the Trend of Intellectualization

Intellectualization has become a new trend for telecom industry, driven by intelligent technology including cloud computing, big data, and Internet of things. In order to satisfy the service demand of intelligent logistics, this paper designed an intelligent logistics platform containing the main applications such as e-commerce, self-service transceiver, big data analysis, path location and distribution optimization. The intelligent logistics service platform has been built based on cloud computing to collect, store and handling multi-source heterogeneous mass data from sensors, RFID electronic tag, vehicle terminals and APP, so that the open-access cloud services including distribution, positioning, navigation, scheduling and other data services can be provided for the logistics distribution applications. And then the architecture of intelligent logistics cloud platform containing software layer(SaaS), platform layer(PaaS) and infrastructure(IaaS) has been constructed accordance with the core technology relative high concurrent processing technique, heterogeneous terminal data access, encapsulation and data mining. Therefore, intelligent logistics cloud platform can be carried out by the service mode for implementation to accelerate the construction of the symbiotic win-winlogistics ecological system and the benign development of the ICT industry in the trend of intellectualization in China.

Horizontal gas mixing in rectangular fluidized bed:A novel method for gas dispersion coefficients in various conditions and distributor designs

In a rectangular fluidized bed combustor, the tracer gas is injected continuously into the bed from a point source at the center of the distributor plate. In this study, a general governing equation is formulated for tracer gas dispersion in the bed. An analytical solution is derived to estimate the dispersion coefficients, Dxand Dy, in a horizontal plane. The concentration profiles at different sampling heights with various gas velocities are plotted.Subsequently, to estimate the dispersion coefficients, surface fitting of the obtained analytical solution to the experimental data is performed. The dispersion coefficients obtained from this model are compared with those of a conventional model. Additionally, the effect of walls, bed height and gas injection rate on the dispersion coefficients in a horizontal plane is investigated, and the effect of distributor design on the dispersion coefficients in a horizontal plane is investigated with different tracer positions. It is found that Dxand Dyare nearly equivalent at a lower tracer gas ratio of the injected gas to the total gas flow rate. It is also demonstrated that the effect of bed height on Dxis minor. This model is also able to estimate the dispersion coefficients in the case of a multihorizontal nozzle distributor.

Optimal design of APD biasing circuit

This paper proposes a control method for avalanche photodiode(APD) reverse bias with temperature compensation and load resistance compensation. The influence of background light and load resistance on APD detection circuit is analyzed in detail. A theoretical model of temperature compensation and load resistance compensation is established,which is used for APD biasing circuit designing. It is predicted that this control method is especially suitable for LD laser range finder used on vehicles. Experimental results confirm that the design proposed in this paper can considerablely improve the performance of range finder.

Density distribution in a heavy-medium cyclone

Heavy-medium cyclones are widely used to upgrade run-of-mine coal.But the understanding of flow in a cyclone containing a dense medium is still incomplete.By introducing turbulent diffusion into calculations of centrifugal settling a theoretical distribution function giving the density field can be deduced.Qualitative analysis of the density field in every part of a cylindrical cyclone suggests an optimum design that has exhibited good separation effectiveness and anti-wear performance when in commercial operation.

DC FLOW SUPPRESSION IN A SINGLE-STAGE G-M TYPE PULSE TUBE COOLER

An experimental investigation on DC flow suppression in a single-stage G-M type pulse tube cooler is made. The influence of DC flow induced by the introduction of the double-inlet on the refrigeration performance of the cooler is experimentally examined. Two parallelplaced needle valves with an opposite flow direction called as double-valved configuration, instead of conventional single-valved configuration as the double-inlet is used to reduce the DC flow. With the double-valved configuration, the minimum temperatures of 18.4 K and 14.7 K, and the cooling powers of 11.5 W and 29.5 W are also obtained by RW2 and CP4000, respectively.

The Research on Optimization of the Multiphase Flow Field of Biogas Plant by Using CFD Software

The inner flow field of a biogas plant can be optimized by agitating the feedstock to be evenly distributed for a rising biogas production rate. A hydraulic agitator can be installed in the digester with outlets far above the bottom. Hydraulic mixing is essential in a solid-liquid two-phase flow process, in which large solid particles can be found at the initial stage and turn to being high-concentration viscous liquid （non-Newtonian fluid）. A 0.75 m3 digester was taken as a case study with CFD （computational fluid dynamics） software. The basic pattern was simulated by using water as the medium and the pattern of pseudo plastic fluid state was simulated by the Euler-Euler Model, then the effect of optimized design with bottom inflow and high dispersed outlets could be verified. Viewed from the mixing effects, the velocity of 0.6 m/s is better than l m/s for water medium, while 1 m/s better than 0.6 m/s for pseudo plastic fluid medium.

A 14.5Gb/s word alignment circuit in 0.18μm CMOS technology for high-speed SerDes

This paper presents a word alignment circuit for high speed SerDes system.By using pipeline structure and circuit optimization techniques,the speed of the aligner is increased,and its performance is improved further through adopting the full custom design method.The proposed word aligner has fabricated in 0.18μm CMOS technology with total area of 1.075 ×0.775mm^2￣ including I/O pad.Measurement results show that this circuit achieves the maximum data rate of 14.5Gb/s,while consuming a total power of 34.9mW from a 1.8V supply.

Boundary Layer Development on a Concave Surface： Flow Visualization and Hot Wire Velocity Measurements

Gortler vortices are key issues in the design of gas turbine blades. The present study deals with flow visualization over concave surface for gas turbine applications. The aim is to comprehend qualitatively the flow trends, particularly the Gortler vortices formation and development. Gortler vortices have the shape of mushroom-like vortices regularly spaced at 25 mm. These vortices grow and increase in strength more rapidly along the surface in the case of the same grid of turbulence applied to the measuring section. The curvature radius of the studied blade is 0.5 m and the stream turbulence intensity level is 2.6%. The velocity field is measured by hot wire anemometer in the streamwise direction. The velocity profile is found to be highly distorted by the momentum transfer associated with Gortler vortices. The results are compared to Blasius flow and to literature data for a blade with curvature radius equal to 2 m.