This paper intends to describe the relationship between traffic parameters by using cusp catastrophe theory and to deduce highway capacity and corresponding speed forecasting value through suitable transformation of c...This paper intends to describe the relationship between traffic parameters by using cusp catastrophe theory and to deduce highway capacity and corresponding speed forecasting value through suitable transformation of catastrophe model. The five properties of a catastrophe system are outlined briefly, and then the data collected on freeways of Zhujiang River Delta, Guangdong province, China are examined to ascertain whether they exhibit qualitative properties and attributes of the catastrophe model. The forecasting value of speed and capacity for freeway segments are given based on the catastrophe model. Furthermore, speed-flow curve on freeway is drawn by plotting out congested and uncongested traffic flow and the capacity value for the same freeway segment is also obtained from speed-flow curve to test the feasibility of the application of cusp catastrophe theory in traffic flow analysis. The calculating results of catastrophe model coincide with those of traditional traffic flow models regressed from field observed data, which indicates that the deficiency of traditional analysis of relationship between speed, flow and occupancy in two-dimension can be compensated by analysis of the relationship among speed, flow and occupancy based on catastrophe model in three-dimension. Finally, the prospects and problems of its application in traffic flow research in China are discussed.展开更多
Rheological properties of large particulate-liquid model food systems were studied by using the BMS （ball measuring system）. The model food systems were composed of alginate gel particles （-10mm） and a gelatinised...Rheological properties of large particulate-liquid model food systems were studied by using the BMS （ball measuring system）. The model food systems were composed of alginate gel particles （-10mm） and a gelatinised starch solution with 1% w/w sodium chloride as a liquid phase. The effects of particle phase volume （Ф, 0-0.60）, particle shapes （cube, sphere, rod and disc） and starch concentrations （3% and 5% w/w starch） were investigated. The power law model was successfully applied to characterize the flow properties of each system and the consistency K and power law index n were obtained. The K increased and n decreased with increasing # for samples at all particle shapes at 3% w/w starch in the liquid phase. The particle effect on the viscosity is further analysed by means of the Krieger-Dougherty model and the maximum packing fraction #,, and the intrinsic viscosity [η] were obtained in each system. The Фm, depended on the particle shape, as expected. The [7] value depended on particle shape and was largely in the order of 4.04 （cube）, 3.28 （disc）, 2.56 （sphere） and 2.32 （rod） at 3% w/w starch. The [η] also depended on starch concentration and was 1.1 at 5%,6 w/w starch in the liquid phase with spherical particles. The present results show successful application of BMS to study the rheological properties of large particulate liquid food systems at relatively small scale experiment （-0.5 L） and also that existing models for suspension rheology are applicable for such food systems to a great extend.展开更多
Hierarchically nanostructured, porous TiO_2(B) microspheres were synthesized by a microwave-assisted solvothermal method combined with subsequent heat treatment in air. The materials were carefully characterized by sc...Hierarchically nanostructured, porous TiO_2(B) microspheres were synthesized by a microwave-assisted solvothermal method combined with subsequent heat treatment in air. The materials were carefully characterized by scanning and transmission electron microscopy, X-ray diffraction, CO_2 adsorption, and a range of spectroscopies, including Raman, infrared, X-ray photoelectron and UV-Vis spectroscopy. The hierarchical TiO_2(B) particles are constructed by ultrathin nanosheets and possess large specific surface area, which provided many active sites for CO_2 adsorption as well as CO_2 conversion. The TiO_2(B)nanostructures exhibited marked photocatalytic activity for CO_2 reduction to methane and methanol. Anatase TiO_2 and P25 were used as the reference photocatalysts. Transient photocurrent measurement also proved the higher photoactivity of TiO_2(B) than that of anatase TiO_2. In-situ infrared spectrum was measured to identify the intermediates and deduce the conversion process of CO_2 under illumination over TiO_2(B) photocatalyst.展开更多
文摘This paper intends to describe the relationship between traffic parameters by using cusp catastrophe theory and to deduce highway capacity and corresponding speed forecasting value through suitable transformation of catastrophe model. The five properties of a catastrophe system are outlined briefly, and then the data collected on freeways of Zhujiang River Delta, Guangdong province, China are examined to ascertain whether they exhibit qualitative properties and attributes of the catastrophe model. The forecasting value of speed and capacity for freeway segments are given based on the catastrophe model. Furthermore, speed-flow curve on freeway is drawn by plotting out congested and uncongested traffic flow and the capacity value for the same freeway segment is also obtained from speed-flow curve to test the feasibility of the application of cusp catastrophe theory in traffic flow analysis. The calculating results of catastrophe model coincide with those of traditional traffic flow models regressed from field observed data, which indicates that the deficiency of traditional analysis of relationship between speed, flow and occupancy in two-dimension can be compensated by analysis of the relationship among speed, flow and occupancy based on catastrophe model in three-dimension. Finally, the prospects and problems of its application in traffic flow research in China are discussed.
文摘Rheological properties of large particulate-liquid model food systems were studied by using the BMS （ball measuring system）. The model food systems were composed of alginate gel particles （-10mm） and a gelatinised starch solution with 1% w/w sodium chloride as a liquid phase. The effects of particle phase volume （Ф, 0-0.60）, particle shapes （cube, sphere, rod and disc） and starch concentrations （3% and 5% w/w starch） were investigated. The power law model was successfully applied to characterize the flow properties of each system and the consistency K and power law index n were obtained. The K increased and n decreased with increasing # for samples at all particle shapes at 3% w/w starch in the liquid phase. The particle effect on the viscosity is further analysed by means of the Krieger-Dougherty model and the maximum packing fraction #,, and the intrinsic viscosity [η] were obtained in each system. The Фm, depended on the particle shape, as expected. The [7] value depended on particle shape and was largely in the order of 4.04 （cube）, 3.28 （disc）, 2.56 （sphere） and 2.32 （rod） at 3% w/w starch. The [η] also depended on starch concentration and was 1.1 at 5%,6 w/w starch in the liquid phase with spherical particles. The present results show successful application of BMS to study the rheological properties of large particulate liquid food systems at relatively small scale experiment （-0.5 L） and also that existing models for suspension rheology are applicable for such food systems to a great extend.
基金supported by the National Basic Research Program of China(2013CB632402)the National Natural Science Foundation of China(51320105001,21433007,51372190,21573170)+3 种基金the Natural Science Foundation of Hubei Province(2015CFA001)the Fundamental Research Funds for the Central Universities(WUT:2015-III-034)Innovative Research Funds of SKLWUT(2017-ZD-4)the Discovery Early Career Researcher Award(DECRA)by Australian Research Council(DE160101488)
文摘Hierarchically nanostructured, porous TiO_2(B) microspheres were synthesized by a microwave-assisted solvothermal method combined with subsequent heat treatment in air. The materials were carefully characterized by scanning and transmission electron microscopy, X-ray diffraction, CO_2 adsorption, and a range of spectroscopies, including Raman, infrared, X-ray photoelectron and UV-Vis spectroscopy. The hierarchical TiO_2(B) particles are constructed by ultrathin nanosheets and possess large specific surface area, which provided many active sites for CO_2 adsorption as well as CO_2 conversion. The TiO_2(B)nanostructures exhibited marked photocatalytic activity for CO_2 reduction to methane and methanol. Anatase TiO_2 and P25 were used as the reference photocatalysts. Transient photocurrent measurement also proved the higher photoactivity of TiO_2(B) than that of anatase TiO_2. In-situ infrared spectrum was measured to identify the intermediates and deduce the conversion process of CO_2 under illumination over TiO_2(B) photocatalyst.
