期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
流变润滑剂和稳定剂对UPVC管材挤出性能的协同影响 被引量:1
1
作者 唐晓初 朱建国 《新型建筑材料》 1999年第11期19-21,共3页
在德国Krauss-Maffi公司产KMD2-60KK锥形双螺杆挤出机上进行了流变润滑剂和稳定剂对UPVC管材挤出性能的协同影响试验。结果表明:0.5~10PHR的流变润滑剂LUB一501能显著改善熔融流动性,熔体压力下降,熔体温度降低,挤出管材外观光... 在德国Krauss-Maffi公司产KMD2-60KK锥形双螺杆挤出机上进行了流变润滑剂和稳定剂对UPVC管材挤出性能的协同影响试验。结果表明:0.5~10PHR的流变润滑剂LUB一501能显著改善熔融流动性,熔体压力下降,熔体温度降低,挤出管材外观光滑;与R-209稀土、300复合铅相比较,LUB-501与多元综合稳定剂SW-101协同使用的加工性能较好。 展开更多
关键词 流变润滑 稳定剂 UPVC管材 挤出性能
下载PDF
线接触流变弹流润滑的Reynolds方程及应用 被引量:1
2
作者 程建辉 葛培琪 朱志远 《山东大学学报(工学版)》 CAS 2002年第5期433-436,共4页
将描述弹流接触区润滑油流变特性的流变模型归结为三类 导出了适用于第一、二类流变模型的线接触流变弹流润滑Reynolds方程 该方程可用于求解线接触流变热弹流润滑问题的油膜厚度、压力分布、牵曳系数等 以Bair Winer模型为例 ,应用... 将描述弹流接触区润滑油流变特性的流变模型归结为三类 导出了适用于第一、二类流变模型的线接触流变弹流润滑Reynolds方程 该方程可用于求解线接触流变热弹流润滑问题的油膜厚度、压力分布、牵曳系数等 以Bair Winer模型为例 ,应用多重网格方法 。 展开更多
关键词 线接触润滑 REYNOLDS方程 模型 弹性体动压润滑 数值分析 油膜厚度
下载PDF
高速脂润滑深沟球轴承时变润滑特性研究
3
作者 戴鑫 张玉言 +2 位作者 王志良 刘德利 马晨波 《润滑与密封》 2025年第1期88-97,共10页
考虑新能源汽车电机用高速脂润滑深沟球轴承在加减速及高速运转工况下滚动体-套圈接触副润滑性能的时变特征,建立结合轴承力学分析和点接触脂润滑时变弹流润滑控制方程的数学模型;以滚动体-外圈接触副为例,分析润滑脂流变指数对润滑性... 考虑新能源汽车电机用高速脂润滑深沟球轴承在加减速及高速运转工况下滚动体-套圈接触副润滑性能的时变特征,建立结合轴承力学分析和点接触脂润滑时变弹流润滑控制方程的数学模型;以滚动体-外圈接触副为例,分析润滑脂流变指数对润滑性能的影响,探讨加速及高速稳定运转阶段由载荷和卷吸速度变化所引起的时变润滑特性,并分析轴向载荷对压力和膜厚波动的影响。结果表明:在轴承加速阶段,受载最大的滚动体-外圈接触副的最小润滑脂膜厚度增加,但增速先快后慢;在轴承高速稳定运转阶段,滚动体-外圈接触副压力及膜厚随滚动体的公转呈周期性变化;无论在加速还是稳定运转阶段,平均压力和最小膜厚的波动程度均随轴向载荷的增大而减小,因此从降低轴承噪声和提高润滑稳定性的角度而言,增加轴向载荷是有利的;随着轴承工作温度的增加,由于润滑脂初始塑性黏度和流变指数的变化,稳态下最小脂膜厚度降低,但降速先快后慢。 展开更多
关键词 深沟球轴承 润滑 点接触弹润滑 特性 润滑指数
下载PDF
非线性粘弹性本构方程及其在弹流润滑中的应用 被引量:2
4
作者 冯忠刚 陈大融 温诗铸 《清华大学学报(自然科学版)》 EI CAS CSCD 北大核心 1992年第5期65-71,共7页
文中将线性多组元粘弹性模型在两种不同坐标系中推广从而得到两个非线性粘弹性本构方程,并用这两种本构关系对弹流中摩擦拖曳力进行计算,取得了新的结果。
关键词 流变润滑 非线性 本构关系 粘弹性
原文传递
Dynamic Response of IBM3370 Slider in High Density Recording Systems 被引量:1
5
作者 范钦满 陈云飞 《Journal of Southeast University(English Edition)》 EI CAS 1999年第2期98-104,共7页
A liquid lubricated head disk system is introduced. Subjected to high shear rate the rheology of the ultra thin film is different from that of the bulk continuum theory. The shear thinning effect is considered in set... A liquid lubricated head disk system is introduced. Subjected to high shear rate the rheology of the ultra thin film is different from that of the bulk continuum theory. The shear thinning effect is considered in setting up the mathematical model of the ultra thin film rheology. The Reynolds equation and the perturbation theory are employed to set up the static pressure distribution model and to deduce the dynamic pressure equation. The static and dynamic equations are solved by finite difference method. Based on the dynamic analysis the dynamic response of the slider is simulated and some valuable results are obtained about the static and dynamic characteristics of the liquid lubricated head disk systems. 展开更多
关键词 dynamic characteristics thin film lubrication head disk system
下载PDF
Static and Dynamic Numerical Simulation of High Density Recording Disk Drivers Based on Short Bearing Theory
6
作者 陈云飞 谈红 《Journal of Southeast University(English Edition)》 EI CAS 1999年第1期106-112,共7页
Static and dynamic numerical simulations of high recording density disk drivers are presented in this paper. The shear thinning effect on the viscosity is taken into account in the lubricant rheological model. The per... Static and dynamic numerical simulations of high recording density disk drivers are presented in this paper. The shear thinning effect on the viscosity is taken into account in the lubricant rheological model. The perturbation theory and short bearing theory are employed to set up the static and dynamic lubrication model on the head disk interface. Close solutions are given for the pressure distribution, load capacity and the dynamic characteristics such as stiffness and damping coefficients, which provide a simple method to analyze the dynamic response of the slider supported by the ultra thin fluid film lubricated bearing. Based on the close solutions the static and dynamic responses of the IBM 3380 slider are simulated. Some interesting results are obtained for the analysis of the slider’s flying stability. 展开更多
关键词 thin film lubrication rheological model dynamic characteristics
下载PDF
国内期刊有关塑料助剂及塑料加工题录
7
《塑料助剂》 1999年第6期30-30,共1页
PVC 抗冲击改性剂生产与消费综述 中国氯碱,1999(1):31~34大分子偶联剂对 HDPE/纳米 CaCO<sub>3</sub> 复合材料性能的影响 中国塑料,1999,13(9):25~29锑系热稳定剂的研究开发与应用前景 现代塑料加工应用,1999,11(5... PVC 抗冲击改性剂生产与消费综述 中国氯碱,1999(1):31~34大分子偶联剂对 HDPE/纳米 CaCO<sub>3</sub> 复合材料性能的影响 中国塑料,1999,13(9):25~29锑系热稳定剂的研究开发与应用前景 现代塑料加工应用,1999,11(5):46~48PVC 热稳定剂的发展动态 福建化工。 展开更多
关键词 塑料助剂 塑料加工 国内期刊 塑料工业 热稳定剂 发展概况 高效流变润滑 中国塑料 题录 研究进展
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部