In order to start up the brushless DC motor （BLDCM） without reverse rotation and smoothly switch the running state of the motor, a novel startup and smoothly switching method for a sensodess BLDCM is presented. Base...In order to start up the brushless DC motor （BLDCM） without reverse rotation and smoothly switch the running state of the motor, a novel startup and smoothly switching method for a sensodess BLDCM is presented. Based on the saturation effect of the stator iron, six short voltage pulses are applied to determine the initial rotor position and the rotor can be found within 60°. After that, a series of short and long voltage pulses are used to accelerate the motor and the variation of the response current is utilized to detect the rotor position dynamically. When the motor reaches a certain speed at which the back-electromotive force （EMF） method can be applied, all the power devices are turned off and the running state of the motor is smoothly switched at the moment determined by the relationship between the terminal voltage waveform and the commutation phases. The experimental results verify the feasibility and validity of the proposed method.展开更多
In order to meet the demand of online optimal running, a novel soft sensor modeling approach based on Gaussian processes was proposed. The approach is moderately simple to implement and use without loss of performance...In order to meet the demand of online optimal running, a novel soft sensor modeling approach based on Gaussian processes was proposed. The approach is moderately simple to implement and use without loss of performance. It is trained by optimizing the hyperparameters using the scaled conjugate gradient algorithm with the squared exponential covariance function employed. Experimental simulations show that the soft sensor modeling approach has the advantage via a real-world example in a refinery. Meanwhile, the method opens new possibilities for application of kernel methods to potential fields.展开更多
The hysteresis control combined with PWM control non-inverting buck-boost was proposed to improve the light load efficiency and power density.The constant inductor current control(CICC)was established to mitigate the ...The hysteresis control combined with PWM control non-inverting buck-boost was proposed to improve the light load efficiency and power density.The constant inductor current control(CICC)was established to mitigate the dependence on the external components and device variation and make smooth transition between hysteresis control loop and pulse width modulation(PWM)control loop.The small signal model was deduced for the buck and boost operation mode.The inductor current slope control(ICSC)was proposed to implement the automatic mode transition between buck and boost mode in one switching cycle.The results show that the converter prototype has good dynamic response capability,achieving 94%efficiency and 95%peak efficiency at full 10 A load current.展开更多
A novel double extended state observers(ESOs)-based field-oriented control(FOC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive systems without any phase current sensor.In principle,...A novel double extended state observers(ESOs)-based field-oriented control(FOC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive systems without any phase current sensor.In principle,two current sensors are essential parts of the drive system for implementation of the feedback to achieve high accuracy control.For this purpose,the double ESOs are created to provide feedback stator currents instead of actual current sensors.The first one of the double ESOs is designed to estimate the benchmark value of q-axis stator current,which is a primary premise;While the second is designed to estimate real-time stator currents of d-axis and q-axis simultaneously.The resultant double ESOs can rapidly and accurately give estimation of the actual currents of a-axis,b-axis and c-axis,and the synthesized double ESOs-based FOC strategy for PMSM drive system without any current sensors has satisfactory control performance and strong robustness.Numerical experiments validate the feasibility and effectiveness of the proposed scheme.展开更多
AIM: To investigate sensations to multimodal pain stimulation in the metaplastic and normal parts of the esophagus in patients with Barrett’s esophagus (BE). METHODS: Fifteen patients with BE and 15 age-matched healt...AIM: To investigate sensations to multimodal pain stimulation in the metaplastic and normal parts of the esophagus in patients with Barrett’s esophagus (BE). METHODS: Fifteen patients with BE and 15 age-matched healthy volunteers were subjected to mechanical, thermal and electrical pain stimuli of the esophagus. Both the metaplastic part and the normal part (4 and 14 cm, respectively, above the esophago-gastric junction) were examined. At sensory thresholds the stimulation intensity, referred pain areas, and evoked brain potentials were recorded. RESULTS: Patients were hyposensitive to heat stimulation both in the metaplastic part [median stimulation time to reach the pain detection threshold: 15 (12-34) s vs 14 (6-23) s in controls; F = 4.5, P = 0.04] and the normal part of the esophagus [median 17 (6-32) s vs 13 (8-20) s in controls; F = 6.2, P = 0.02]. Furthermore, patients were hyposensitive in the metaplastic part of the esophagus to mechanical distension [median volume at moderate pain: 50 (20-50) mL vs 33 (13-50) mL in controls; F = 5.7, P = 0.02]. No indication of central nervous system abnormalities was present, as responses were comparable between groups to electrical pain stimuli in the metaplastic part [median current evoking moderate pain: 13 (6-26) mA vs 12 (9-24) mA in controls; F = 0.1, P = 0.7], and in the normal part of the esophagus [median current evoking moderate pain: 9 (6-16) mA, vs 11 (5-11) mA in controls; F = 3.4, P = 0.07]. Furthermore, no differences were seen for the referred pain areas (P-values all > 0.3) or latencies and amplitudes for the evoked brain potentials (P-values all > 0.1). CONCLUSION: Patients with BE are hyposensitive both in the metaplastic and normal part of esophagus likely as a result of abnormalities affecting peripheral nerve pathways.展开更多
This paper presents a novel digital dual-loop control scheme of the PWM(PUlse width modulate)inverter. Deadbeat control technique are employed to enhance the performance. Half switching period delayed sampling and con...This paper presents a novel digital dual-loop control scheme of the PWM(PUlse width modulate)inverter. Deadbeat control technique are employed to enhance the performance. Half switching period delayed sampling and control timing strategy is used to improve the system dynamic response. Simulation and experimental results presented in the paper verified the validity of the proposed control scheme.展开更多
An observer-based fault diagnosis method and a fault tolerant control for open-switch fault and current sensor fault are proposed for interleaved flyback converters of a micro-inverter system. First, based on the topo...An observer-based fault diagnosis method and a fault tolerant control for open-switch fault and current sensor fault are proposed for interleaved flyback converters of a micro-inverter system. First, based on the topology of a grid-connected micro-inverter, a mathematical model of the flyback converters is established. Second, a state observer is applied to estimate the currents online and generate corresponding residuals. The fault is diagnosed by comparing the residuals with the thresholds. Finally, a fault-tolerant control that consists of a fault-tolerant topology for the faulty switch and a simple software redundancy control for the faulty current sensor, is proposed to achieve a fault-tolerant operation. The feasibility and effectiveness of the proposed method has been verified by simulation and experimental results.展开更多
The removal of lead from ginseng ethanol extracts by a fixed-bed column filled with an adsorbent bearing amine and carboxyl groups was investigated. The Pb2+ content was determined by inductively coupled plasma mass s...The removal of lead from ginseng ethanol extracts by a fixed-bed column filled with an adsorbent bearing amine and carboxyl groups was investigated. The Pb2+ content was determined by inductively coupled plasma mass spectrometry. When the flowrate increased from 0.12 to 0.34 ml·min-1 , the column exhibited a marked increase in percentage of lead removal from 54.9% to 92.3%. Further increase in the flowrate did not bring evident changes to the lead removal, whereas an increase in the temperature could reinforce adsorption further, suggesting that the adsorption process was controlled by external film diffusion below the flowrate of 0.34 ml·min-1 , and by the intraparticle pore diffusion of lead ions when the flowrate exceeded it. A low remaining lead amount in extracts such as 0.11 mg·kg-1 (extracts powder) was achieved. The adsorbents also adsorbed effective constituents to some extent. But 88% of constituents adsorbed were taken off using a 70% ethanol aqueous solution.展开更多
Vaccines are used in integrated control strategies to guard poultry against H5N1 high-pathogenicity avian influenza （AI）. This study was to evaluate the efficacy of AI vaccine against AI in poultry. About 400 serum ...Vaccines are used in integrated control strategies to guard poultry against H5N1 high-pathogenicity avian influenza （AI）. This study was to evaluate the efficacy of AI vaccine against AI in poultry. About 400 serum samples were collected from the selected 130 farms located at Rajshahi region, Bangladesh. The study was carried out from January, 2013 to January, 2015. The AI vaccine titres were compared in different breed of layer, environmental temperature, feed and egg production. Result showed that the value of titres （mean ± SD） in Hyline brown, Hyline white, Bovans white and Novogen white were 6.71 ± 0.05, 6.67 ± 0.06, 6.79 ± 0.03 and 6.43 ± 0.04, respectively. The highest serum antibody titres were 6.61 ± 0.24 against AI antibody in 〉 26 ℃ environment temperature. The highest and lowest serum antibody value of AI against feed brand （nutrient） were 7.75 ± 0.08 and 5.58 ± 0.22 for Aftab and Quality brand feed, respectively.展开更多
文摘In order to start up the brushless DC motor （BLDCM） without reverse rotation and smoothly switch the running state of the motor, a novel startup and smoothly switching method for a sensodess BLDCM is presented. Based on the saturation effect of the stator iron, six short voltage pulses are applied to determine the initial rotor position and the rotor can be found within 60°. After that, a series of short and long voltage pulses are used to accelerate the motor and the variation of the response current is utilized to detect the rotor position dynamically. When the motor reaches a certain speed at which the back-electromotive force （EMF） method can be applied, all the power devices are turned off and the running state of the motor is smoothly switched at the moment determined by the relationship between the terminal voltage waveform and the commutation phases. The experimental results verify the feasibility and validity of the proposed method.
文摘In order to meet the demand of online optimal running, a novel soft sensor modeling approach based on Gaussian processes was proposed. The approach is moderately simple to implement and use without loss of performance. It is trained by optimizing the hyperparameters using the scaled conjugate gradient algorithm with the squared exponential covariance function employed. Experimental simulations show that the soft sensor modeling approach has the advantage via a real-world example in a refinery. Meanwhile, the method opens new possibilities for application of kernel methods to potential fields.
文摘The hysteresis control combined with PWM control non-inverting buck-boost was proposed to improve the light load efficiency and power density.The constant inductor current control(CICC)was established to mitigate the dependence on the external components and device variation and make smooth transition between hysteresis control loop and pulse width modulation(PWM)control loop.The small signal model was deduced for the buck and boost operation mode.The inductor current slope control(ICSC)was proposed to implement the automatic mode transition between buck and boost mode in one switching cycle.The results show that the converter prototype has good dynamic response capability,achieving 94%efficiency and 95%peak efficiency at full 10 A load current.
基金National Natural Science Foundation of China(No.61463025)Opening Foundation of Key Laboratory of Opto-technology and Intelligent Control(Lanzhou Jiaotong University),Ministry of Education(No.KFKT2018-8)Program for Excellent Team of Scientific Research in Lanzhou Jiaotong University(No.201701)
文摘A novel double extended state observers(ESOs)-based field-oriented control(FOC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive systems without any phase current sensor.In principle,two current sensors are essential parts of the drive system for implementation of the feedback to achieve high accuracy control.For this purpose,the double ESOs are created to provide feedback stator currents instead of actual current sensors.The first one of the double ESOs is designed to estimate the benchmark value of q-axis stator current,which is a primary premise;While the second is designed to estimate real-time stator currents of d-axis and q-axis simultaneously.The resultant double ESOs can rapidly and accurately give estimation of the actual currents of a-axis,b-axis and c-axis,and the synthesized double ESOs-based FOC strategy for PMSM drive system without any current sensors has satisfactory control performance and strong robustness.Numerical experiments validate the feasibility and effectiveness of the proposed scheme.
基金Supported by "Hertha Christensens Fond" and "The Danish Agency for Science, Technology and Innovation"
文摘AIM: To investigate sensations to multimodal pain stimulation in the metaplastic and normal parts of the esophagus in patients with Barrett’s esophagus (BE). METHODS: Fifteen patients with BE and 15 age-matched healthy volunteers were subjected to mechanical, thermal and electrical pain stimuli of the esophagus. Both the metaplastic part and the normal part (4 and 14 cm, respectively, above the esophago-gastric junction) were examined. At sensory thresholds the stimulation intensity, referred pain areas, and evoked brain potentials were recorded. RESULTS: Patients were hyposensitive to heat stimulation both in the metaplastic part [median stimulation time to reach the pain detection threshold: 15 (12-34) s vs 14 (6-23) s in controls; F = 4.5, P = 0.04] and the normal part of the esophagus [median 17 (6-32) s vs 13 (8-20) s in controls; F = 6.2, P = 0.02]. Furthermore, patients were hyposensitive in the metaplastic part of the esophagus to mechanical distension [median volume at moderate pain: 50 (20-50) mL vs 33 (13-50) mL in controls; F = 5.7, P = 0.02]. No indication of central nervous system abnormalities was present, as responses were comparable between groups to electrical pain stimuli in the metaplastic part [median current evoking moderate pain: 13 (6-26) mA vs 12 (9-24) mA in controls; F = 0.1, P = 0.7], and in the normal part of the esophagus [median current evoking moderate pain: 9 (6-16) mA, vs 11 (5-11) mA in controls; F = 3.4, P = 0.07]. Furthermore, no differences were seen for the referred pain areas (P-values all > 0.3) or latencies and amplitudes for the evoked brain potentials (P-values all > 0.1). CONCLUSION: Patients with BE are hyposensitive both in the metaplastic and normal part of esophagus likely as a result of abnormalities affecting peripheral nerve pathways.
文摘This paper presents a novel digital dual-loop control scheme of the PWM(PUlse width modulate)inverter. Deadbeat control technique are employed to enhance the performance. Half switching period delayed sampling and control timing strategy is used to improve the system dynamic response. Simulation and experimental results presented in the paper verified the validity of the proposed control scheme.
基金Project(2012AA051601)supported by the High-Tech Research and Development Program of China
文摘An observer-based fault diagnosis method and a fault tolerant control for open-switch fault and current sensor fault are proposed for interleaved flyback converters of a micro-inverter system. First, based on the topology of a grid-connected micro-inverter, a mathematical model of the flyback converters is established. Second, a state observer is applied to estimate the currents online and generate corresponding residuals. The fault is diagnosed by comparing the residuals with the thresholds. Finally, a fault-tolerant control that consists of a fault-tolerant topology for the faulty switch and a simple software redundancy control for the faulty current sensor, is proposed to achieve a fault-tolerant operation. The feasibility and effectiveness of the proposed method has been verified by simulation and experimental results.
基金Supported by the National＇Natural Science Foundation of China （20976012, 20806009）, and the Specialized Research Fund for the Doctoral Program of Higher Education （20070007055, 20091101110035）.
文摘The removal of lead from ginseng ethanol extracts by a fixed-bed column filled with an adsorbent bearing amine and carboxyl groups was investigated. The Pb2+ content was determined by inductively coupled plasma mass spectrometry. When the flowrate increased from 0.12 to 0.34 ml·min-1 , the column exhibited a marked increase in percentage of lead removal from 54.9% to 92.3%. Further increase in the flowrate did not bring evident changes to the lead removal, whereas an increase in the temperature could reinforce adsorption further, suggesting that the adsorption process was controlled by external film diffusion below the flowrate of 0.34 ml·min-1 , and by the intraparticle pore diffusion of lead ions when the flowrate exceeded it. A low remaining lead amount in extracts such as 0.11 mg·kg-1 (extracts powder) was achieved. The adsorbents also adsorbed effective constituents to some extent. But 88% of constituents adsorbed were taken off using a 70% ethanol aqueous solution.
文摘Vaccines are used in integrated control strategies to guard poultry against H5N1 high-pathogenicity avian influenza （AI）. This study was to evaluate the efficacy of AI vaccine against AI in poultry. About 400 serum samples were collected from the selected 130 farms located at Rajshahi region, Bangladesh. The study was carried out from January, 2013 to January, 2015. The AI vaccine titres were compared in different breed of layer, environmental temperature, feed and egg production. Result showed that the value of titres （mean ± SD） in Hyline brown, Hyline white, Bovans white and Novogen white were 6.71 ± 0.05, 6.67 ± 0.06, 6.79 ± 0.03 and 6.43 ± 0.04, respectively. The highest serum antibody titres were 6.61 ± 0.24 against AI antibody in 〉 26 ℃ environment temperature. The highest and lowest serum antibody value of AI against feed brand （nutrient） were 7.75 ± 0.08 and 5.58 ± 0.22 for Aftab and Quality brand feed, respectively.
