基于蓝牙HCI传输层流控模型的构建

根据停-等流控原理构造了一种基于蓝牙HCI UART传输层的流控模型,并对该模型进行了流控效率的分析,提出了最佳流控效率的条件表达式,这对降低HCI UART低速率的瓶颈效能和提高蓝牙数据传输速率具有指导意义,仿真实验结果表明,模型符合流控效率的理论分析。

蓝牙HCI传输层流量控制的研究

根据停-等流控原理构造了一种基于蓝牙HCIUART传输层的流控模型,并对该模型进行了流控效率的分析,给出了流控效率的数学表达式,提出了最佳流控效率的条件表达式,这对降低HCIUART低速率的瓶劲效能和提高蓝牙数据传输速率具有指导意义。在上述分析基础上,开发了一个基于HCIUART流量控制性能分析的仿真软件,仿真实验结果符合流控效率的理论分析。

蓝牙HCI UART传输层流量控制的研究

针对HCI UART传输层的二种流量控制方式,采用状态系列的分析方法,建立了流量控制模型,并给出了流控效率的数学表达式,总结出了最佳流控效率的条件表达式,这对降低HCI UART低速率的瓶劲效能和提高蓝牙数据传输速率具有指导意义。在上述分析基础上,开发了一个基于HCI UART流量控制性能分析的仿真软件,仿真实验结果符合流控效率的理论分析。

CTI技术中一种语音传输方法的设计与实现

本文对CTI技术中语音数据在PC和交换机单班之间的数据传送方法和策略进行了研究,实现了基于UDP协议上的类SCTP协议的传输策略,完成在不可靠的传输媒体上进行语音包的正确无序传输。同时讨论了多个语音数据流共享一个网络传输连接的情况下的流量控制和带宽分配方法。

自适应寻径的路由器设计

本文介绍了一种高性能路由器（ＨＰＲ）的设计，ＨＰＲ能工作在２００ＭＨＺ的高速网络主频下，每条信道的数据传输率高达４００ＭＢ／ｓ，它具有支持高速流水式信道、自适应路由算法、改进型Ｗｏｒｍｈｏｌｅ流控策略等新的特征．

Analysis and design of over-current limit control strategies applied in aeronautical power supplies

Some Over-Current Limit Control strategies are analyzed and designed to meet the demands of high reliability and rapid dynamic response in the aeronautical power supply applications. The control schemes are both effective in DC-DC converters and DC-AC converters. Controller models are set up, and the over-current limit operation principles of analogy and digital control are analyzed too. An 800VA aeronautical power supply bas been constructed to verify the performance of the proposed control strategy in various cases such as the sudden load change and the constant load. The analysis and experiments confirm the advantages of the proposed over-current limit strategies as follows： simple,effective and reliable.

Extended consensus analysis of multi-agent systems with switching topologies

Theoretical analysis of consensus for networked multi-agent systems with switching topologies was conducted.Supposing that information-exchange topologies of networked system are dynamic,a modified linear protocol is proffered which is more practical than existing ones.The definition of trajectory consensus is given and a new consensus protocol is exhibited such that multi-agent system achieves trajectory consensus.In addition,a formation control strategy is designed.A common Lyapunov function is proposed to analyze the consensus convergence of networked multi-agent systems with switching topologies.Simulations are provided to demonstrate the effectiveness of the theoretical results.

Control Strategies for PM Synchronous Machine Controlled Rectifier Intended for Heavy-Duty Vehicle

In order to charge batteries and supply all the electrical devices like wheel-motors used in a heavy-duty hybrid electric vehicle, a solution consists in using an assembly permanent magnet generator driven by a diesel engine and a three-phase insulated gate bipolar transistor/diodes bridge controlled rectifier connected to the battery. In this work, hysteresis current control strategies combined with a judicious current sensing mode for the assembly permanent magnet synchronous machine-controlled rectifier are investigated. Main issues first concern the different kinds of transistors switching modes allowed by the proposed current sensing mode when the machine operates either as a generator or as a motor. Second, the modulated hysteresis method is presented, which merges the performances of robustness and dynamic of the classical hysteresis method and imposes the switching frequency alike pulsewidth modulation techniques. A test bench at reduced power permits to test the switching modes as well as classical and modulated hysteresis methods for both motor and generator operating modes and to validate the simulation predictions. The digital signal processor algorithm elaborated for the control strategy is flexible and adaptable to all kinds of transistor switchings and machine operating modes.

Semi-active predictive control strategy for seismically excited structures using MRF-04K dampers

The theoretical study of a semi-active predictive control(SAPC) system with magnetorheological(MR) dampers to reduce the responses of seismically excited structures was presented.The SAPC scheme is based on a prediction model of the system response to obtain the control actions by minimizing an object function,which has a function of self-compensation for time delay occurring in real application.A double-ended shear mode combined with a valve mode MR damper,named MRF-04K damper,with the maximum force of 20 kN was designed and manufactured,and parameters of the Bouc-Wen hysteresis model were determined to portray the behavior of this damper.As an example,a 5-story building frame equipped with 2 MRF-04K dampers was presented to demonstrate the performance of the proposed SAPC scheme for addressing time delay and reducing the structural responses under different earthquakes.Comparison with the uncontrolled structure,the passive-off and passive-on cases indicates that both the peak and the norm values of structural responses are all clearly reduced,and the SAPC scheme has a better performance than the two passive cases.

Current Limiting Characteristic Analysis of Magnetic-controlled Switcher Type Fault Current Limiter

A novel magnetic-controlled switcher type fault current limiter (FCL) based on the topology of the saturated iron core high temperature superconducting FCL is proposed. The magnetic field distribution of the FCL iron core is analyzed by FEA software ANSYS. The current limiting characteristic is investigated by both 3-D field-circuit coupled simulation and Matlab. The experiments on the 220 V/50 A test model show that the FCL can limit the fault current swiftly and effectively,and the FCL has the advantages of simple and reliable structure, flexible control strategy. The simulation and experimental results prove that the theoretical expectation and current limiting performance is satisfactory for practical use.

Inventory control model based on external and interior reverse logistics

To improve the inventory control strategy for enterprise and optimize inventory control parameters of existing external and interior reverse logistics, a multi-resource inventory control model is proposed to better simulate the logistics fact, which is aimed at periodic inventory checking and pull mode of inventory control strategy, based on the return product arrival time obeying Poisson distribution, the return product employing lotsize process and the nonzero lead time of manufaeturinge/remanufacturing. The rational cost function with multiple constraints is employed to describe the inventory model. The genetic algorithm is employed to solve the inventory cost function to obtain the optimal solution of inventory checking periods, safe inventory point, product lot-sizes and process lot-sizes of return product. An example is presented to prove the feasibility and validity of the proposed method. Moreover, the influence of manufacturing/remanufacturing lead time and reuse rate of return production on the inventory control strategy of enterprise is analyzed.

Study on Vaccination Efficacy against Avian Influenza in Rajshahi, Bangladesh

Vaccines are used in integrated control strategies to guard poultry against H5N1 high-pathogenicity avian influenza （AI）. This study was to evaluate the efficacy of AI vaccine against AI in poultry. About 400 serum samples were collected from the selected 130 farms located at Rajshahi region, Bangladesh. The study was carried out from January, 2013 to January, 2015. The AI vaccine titres were compared in different breed of layer, environmental temperature, feed and egg production. Result showed that the value of titres （mean ± SD） in Hyline brown, Hyline white, Bovans white and Novogen white were 6.71 ± 0.05, 6.67 ± 0.06, 6.79 ± 0.03 and 6.43 ± 0.04, respectively. The highest serum antibody titres were 6.61 ± 0.24 against AI antibody in 〉 26 ℃ environment temperature. The highest and lowest serum antibody value of AI against feed brand （nutrient） were 7.75 ± 0.08 and 5.58 ± 0.22 for Aftab and Quality brand feed, respectively.

DC faults ride-through capability analysis of Full-Bridge MMC-MTDC System

Full-Bridge Modular Multilevel Converter(FBMMC) has strong ability to ride through serious DC faults,thus it is very suitable for multi-terminal flexible HVDC applications.However,no references have reported the locating and isolating of DC faults and corresponding DC faults ride-through capability evaluation index.This paper introduces the topology mechanism of FBMMC and its loss reduction operation mode,theoretically certifies that the universal decoupled control strategy of Voltage Source Converter(VSC) and the similar modulation strategies of Half-Bridge MMC(HBMMC) can be applied to FBMMC for constructing complete closed-loop control system.On the basis of the existing DC faults locating and isolating schemes of 2-level VSC based Multi-Terminal HVDC(VSC-MTDC) system and the particularity of FBMMC,this paper proposes the DC faults wire selection "handshaking" method of the FBMMC-MTDC system,and proposes the DC Fault Ride-Through Capability Index(DFRTI) for evaluating the DC faults suppressing capability of the VSC-MTDC systems,including FBMMC-MTDC.Simulations of FBMMC-MTDC in PSCAD/EMTDC validate the correctness and effectiveness of the proposed control strategy and evaluation index.

Bias Current Influence on the Characteristic of the Magnetic-controlled Switcher Type Fault Current Limiter

A novel magnetic-controlled switcher type fault current limiter （FCL） for high voltage electric network is presented. The current limiting principle of the FCL and the bias current influence on the characteristic of the FCL axe discussed. The experiments on the 220 V/50 A test model show that the FCL can limit the fault current swiftly and effectively. Under the normal state, the bias current adjustment can change the FCL voltage loss; under the fault state, the steady fault current can be easily adjusted to the preset level by bias current regulating. The experimental result is in accordance with the principle analysis and the FCL has the advantages of flexible control strategy and simple and reliable structure.

A novel control strategy for load converter of DC isolated distribution system under unbalanced loading conditions

A novel control strategy for the load converter supplying the unbalanced AC load in a DC isolated distribution system is presented. The control algorithm results in balanced and sinusoidal load voltages under unbalanced AC loading. The unbalanced load is characterized in the d-q-0 rotating coordinate based on symmetrical sequence components. Also, the mathematical model of the load converter in both a-b-c and d-q-0 coordinates is derived by using the average large signal model. Then, two control strategies for the load converter are presented. The first one uses the conventional d-q-0 controller to ensure the voltage and current regulation. The second one is a newly proposed control strategy based on the decomposition of the voltage and current into in-stantaneous positive, negative, and zero sequences. These three sequences are controlled independently in their own reference frames as DC signals. The performance of the load converter using these two control strategies is compared. Simulation results show the validity and capability of the newly proposed control strategy.

Role of precautionary measures in HIV epidemics： A mathematical assessment

United Nations Political Declaration 2011 on HIV and AIDS calls to reduce the sexual transmission and the transmission of HIV among people, who inject drugs by 50% by 2015, through different control strategies and precautionary measures. In this paper, we propose and study a simple SI type model that considers the effect of various precaution- ary measures to control HIV epidemic. We show, unlike conventional epidemic models, that the basic reproduction number which essentially considered as the disease eradica- tion condition is no longer sufficient to eliminate HIV infection. In particular, we show that even when the basic reproduction number is made less than unity, the disease may persist if the initial outbreak is not low. Eradication of disease is however guaranteed if the ensemble control measure exceeds some upper critical value. It is also shown that an epidemic model with mass action incidence may exhibit backward bifurcation and bistability if density-dependent demography is considered. Our theoretical study thus indicates that extra attention should be given in controlling HIV epidemic to achieve the desired result.