期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
流线方向控制数值振荡的理论与最优方法
1
作者 何野 沈亚菲 《电子学报》 EI CAS CSCD 北大核心 1992年第2期80-82,共3页
本文提出了流线方向控制数值振荡的最优方法,与传统的Scharfetter-Gummel方法和SUPG方法相比,本方法在消除数值振荡和侧风效应方面具备更好的特性。
关键词 数值振荡 侧风效应 控制 流线方向
下载PDF
风暴相对螺旋度的应用 被引量:3
2
作者 张健宏 《陕西气象》 2004年第3期5-7,共3页
引入了风暴相对螺旋度——SRH的概念,阐述了SRH的定义和物理意义,分析了2003-07-15大降水过程的演变。结果表明SRH作为一个预报强天气的参数具有实际意义。
关键词 风暴相对螺旋度 切变风矢 沿流线方向涡度 SRH
下载PDF
铝合金2A70高应变率力学性能及其本构关系实验研究 被引量:2
3
作者 顾然 王强 +1 位作者 侯亮 索涛 《实验力学》 CSCD 北大核心 2014年第5期543-548,共6页
在室温下,利用分离式Hopkinson拉杆系统进行了平行和垂直流线方向切割的铝合金2A70圆棒试样的高应变率(1300-2300/s)拉伸实验;利用分离式Hopkinson压杆系统进行了圆柱试样的高应变率(1100-11000/s)压缩实验,分析了应变率与试样切割... 在室温下,利用分离式Hopkinson拉杆系统进行了平行和垂直流线方向切割的铝合金2A70圆棒试样的高应变率(1300-2300/s)拉伸实验;利用分离式Hopkinson压杆系统进行了圆柱试样的高应变率(1100-11000/s)压缩实验,分析了应变率与试样切割方向对试样力学性能的影响,并对比研究了不同应变率下试样断口的形貌。实验结果表明,铝合金2A70的屈服强度在应变率达到11000/s时会得到一定提高;垂直流线切割的试样强度略高于平行流线切割的试样;随应变率升高,拉伸试样的断口更为平滑,颗粒细密,但压缩试样会形成环状的粗晶区。最后基于实验数据拟合了J-C(Johnson-Cook)本构模型参数。 展开更多
关键词 铝合金2A70 高应变率 屈服强度 流线方向 断口 本构模型
原文传递
On the Regularity of Shear Thickening Viscous Fluids 被引量:4
4
作者 Francesca CRISPO 《Chinese Annals of Mathematics,Series B》 SCIE CSCD 2009年第3期273-280,共8页
The aim of this note is to improve the regularity results obtained by H. Beirao da Veiga in 2008 for a class of p-fluid flows in a cubic domain. The key idea is exploiting the better regularity of solutions in the tan... The aim of this note is to improve the regularity results obtained by H. Beirao da Veiga in 2008 for a class of p-fluid flows in a cubic domain. The key idea is exploiting the better regularity of solutions in the tangential directions with respect to the normal one, by appealing to anisotropic Sobolev embeddings. 展开更多
关键词 Non-Newtonian fluids Shear dependent viscosity Boundary regularity
原文传递
Mathematical modeling of micropolar fluid flow through an overlapping arterial stenosis
5
作者 Ahmad Reza Haghighi Mohammad Shahbazi Asl 《International Journal of Biomathematics》 2015年第4期257-271,共15页
In this study a mathematical model for two-dimensional pulsatile blood flow through overlapping constricted tapered vessels is presented. In order to establish resemblance to the in vivo conditions, an improved shape ... In this study a mathematical model for two-dimensional pulsatile blood flow through overlapping constricted tapered vessels is presented. In order to establish resemblance to the in vivo conditions, an improved shape of the time-variant overlapping stenosis in the elastic tapered artery subject to pulsatile pressure gradient is considered. Because it contains a suspension of all erythrocytes, the flowing blood is represented by micropolar fluid. By applying a suitable coordinate transformation, tapered cosine-shaped artery turned into non-tapered rectangular and a rigid artery. The governing nonlinear partial differential equations under the imposed realistic boundary conditions are solved using the finite difference method. The effects of vessel tapering on flow characteristics consid- ering their dependencies with time are investigated. The results show that by increasing the taper angle the axial velocity and volumetric flow rate increase and the microrota- tional velocity and resistive impedance reduce. It has been shown that the results are in agreement with similar data from the literature. 展开更多
关键词 Finite difference scheme tapered artery micropolar fluid blood flow.
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部