期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
速度管柱气液两相流算法架构设计及应用 被引量:3
1
作者 杜宇成 汤清源 +4 位作者 林天齐 郭智栋 于志军 李小龙 刘旭辉 《石油机械》 北大核心 2020年第11期58-64,共7页
针对速度管柱作业管内与环空两种生产方式中J曲线与IPR曲线的气液两相流算法架构设计及应用问题,基于临界携液流量和流道压降理论,综合考虑储层油气溶解率、气井过载、流体摩擦阻力及IPR曲线模型的合理选择等因素,建立了速度管柱流道压... 针对速度管柱作业管内与环空两种生产方式中J曲线与IPR曲线的气液两相流算法架构设计及应用问题,基于临界携液流量和流道压降理论,综合考虑储层油气溶解率、气井过载、流体摩擦阻力及IPR曲线模型的合理选择等因素,建立了速度管柱流道压降计算模型。运用插值法和迭代法求解模型,研究分析了输出产量与井底压力及其对应深度的流速特性。研究结果表明:采用小管径的连续管速度管柱能提高井底流速,但管径愈小,管内摩擦阻力愈大,导致流道内沿程压力损失增大而影响携液能力,反而不利于气井高效生产;应使生产特性曲线内临界流量点位于J曲线与IPR曲线交点的左侧,且流道内流体流速高于临界携液流速。研究结果可为速度管柱的优选提供理论依据。 展开更多
关键词 速度管柱 算法架构 J曲线 IPR曲线 临界携液流量 流道压降
下载PDF
Measurement and Correlation of Pressure Drop for Gas-Liquid Two-phase Flow in Rectangular Microchannels 被引量:16
2
作者 MA Youguang JI Xiyan WANG Dongji FU Taotao ZHU Chunying 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2010年第6期940-947,共8页
The pressure drop of gas-liquid two-phase flow in microchannel is of fundamental importance in heat and mass transfer processes. In this work,the pressure drop of gas-liquid two-phase flow in horizontal rectangular cr... The pressure drop of gas-liquid two-phase flow in microchannel is of fundamental importance in heat and mass transfer processes. In this work,the pressure drop of gas-liquid two-phase flow in horizontal rectangular cross-section microchannels was measured by a pressure differential transducer system. Water,ethanol and n-propanol were used as liquid phase to study the effects of capillary number on pressure drop;air was used as the gas phase. Four microchannels with various dimensions of 100 μm× 200 μm,100 μm× 400 μm,100 μm× 800 μm and 100 μm× 2000 μm(depth × width) were used for determining the influence of configuration on the pressure drop. Experimental results showed that in micro-scale,the capillary number also affected the pressure drop remarkably,and in spite of only one-fold difference in aspect ratio,the variation of pressure drop reached up to near three times under the same experimental conditions. Taking the effects of aspect ratio and surface tension into account,a modi-fied correlation for Chisholm parameter C in the Chisholm model was proposed for predicting the frictional multi-plier,and the predicted values by the proposed correlation showed a satisfactory agreement with experimental data. 展开更多
关键词 pressure drop rectangular cross-section microchannel surface tension configuration influence Chis-holm parameter C
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部