Previous works have shown that the suction probe cannot be used to accurately measure the upward and downward particle fluxes independently. A new method using a single optical probe to measure the local solid flux is...Previous works have shown that the suction probe cannot be used to accurately measure the upward and downward particle fluxes independently. A new method using a single optical probe to measure the local solid flux is presented. The measurement of upward, downward and net solid fluxes was carried out in a cold model circulating fluidized bed (CFB) unit. The result shows that the profile of the net solid flux is in good agreement with the previous experimental data measured with a suction probe. The comparison between the average solid flux determined with the optical measuring system and the external solid flux was made, and the maximum deviationturned out to be 22%, with the average error being about 6.9%. These confirm that the optical fiber system can be successfully used to measure the upward, downward and net solid fluxes simultaneously by correctly processing the sampling signals obtained from the optical measuring system.展开更多
The droplet size distribution with large-holed compound sieve tray operating in the spray regime is measured by using a double electrical probes technique in a cold model column of 400 mm diameter. The results indicat...The droplet size distribution with large-holed compound sieve tray operating in the spray regime is measured by using a double electrical probes technique in a cold model column of 400 mm diameter. The results indicate that the hole F-factor F0 and surface tension are the main factors which influence the liquid dispersion expressed by the Sauter mean diameter D32. A correlation of D32 on surface tension, viscosity, .F-factor, weir height and liquid flow rate is proposed.展开更多
Neutronics measurement system provides neutron fluxes and spectra at the locations of beryllium multiplier and tritium breeder during the operation of the NT-TBM （D-D and D-T phase in ITER）. This is important for st...Neutronics measurement system provides neutron fluxes and spectra at the locations of beryllium multiplier and tritium breeder during the operation of the NT-TBM （D-D and D-T phase in ITER）. This is important for studying and assessing capabilities of beryllium multiplier and tritium breeder in the China helium cooled solid breeder （CNHCSB）. A special neutron diagnostic system has been proposed that allows to measure neutron fluxes and spectra without interrupt the operation of ITER. This system includes encapsulated foil activation analysis, micro-fission chamber detectors （MFC）, and a compact neutron spectrometer using natural diamond detector （NDD）.展开更多
文摘Previous works have shown that the suction probe cannot be used to accurately measure the upward and downward particle fluxes independently. A new method using a single optical probe to measure the local solid flux is presented. The measurement of upward, downward and net solid fluxes was carried out in a cold model circulating fluidized bed (CFB) unit. The result shows that the profile of the net solid flux is in good agreement with the previous experimental data measured with a suction probe. The comparison between the average solid flux determined with the optical measuring system and the external solid flux was made, and the maximum deviationturned out to be 22%, with the average error being about 6.9%. These confirm that the optical fiber system can be successfully used to measure the upward, downward and net solid fluxes simultaneously by correctly processing the sampling signals obtained from the optical measuring system.
基金Supported by the Key Technologies R&D Programme (No. 95-530-01-02).
文摘The droplet size distribution with large-holed compound sieve tray operating in the spray regime is measured by using a double electrical probes technique in a cold model column of 400 mm diameter. The results indicate that the hole F-factor F0 and surface tension are the main factors which influence the liquid dispersion expressed by the Sauter mean diameter D32. A correlation of D32 on surface tension, viscosity, .F-factor, weir height and liquid flow rate is proposed.
文摘Neutronics measurement system provides neutron fluxes and spectra at the locations of beryllium multiplier and tritium breeder during the operation of the NT-TBM （D-D and D-T phase in ITER）. This is important for studying and assessing capabilities of beryllium multiplier and tritium breeder in the China helium cooled solid breeder （CNHCSB）. A special neutron diagnostic system has been proposed that allows to measure neutron fluxes and spectra without interrupt the operation of ITER. This system includes encapsulated foil activation analysis, micro-fission chamber detectors （MFC）, and a compact neutron spectrometer using natural diamond detector （NDD）.
