Previous works have shown that the suction probe cannot be used to accurately measure the upward and downward particle fluxes independently. A new method using a single optical probe to measure the local solid flux is...Previous works have shown that the suction probe cannot be used to accurately measure the upward and downward particle fluxes independently. A new method using a single optical probe to measure the local solid flux is presented. The measurement of upward, downward and net solid fluxes was carried out in a cold model circulating fluidized bed (CFB) unit. The result shows that the profile of the net solid flux is in good agreement with the previous experimental data measured with a suction probe. The comparison between the average solid flux determined with the optical measuring system and the external solid flux was made, and the maximum deviationturned out to be 22%, with the average error being about 6.9%. These confirm that the optical fiber system can be successfully used to measure the upward, downward and net solid fluxes simultaneously by correctly processing the sampling signals obtained from the optical measuring system.展开更多
According to the physical and chemical characteristics of superfine powder extinguishing agent,three test methods are selected to measure the flow ability.By studying and comparing various test methods,apparatus and c...According to the physical and chemical characteristics of superfine powder extinguishing agent,three test methods are selected to measure the flow ability.By studying and comparing various test methods,apparatus and conditions,the optimum method and conditions to test flow property of superfine powder extinguishing agent are confirmed.展开更多
Neutronics measurement system provides neutron fluxes and spectra at the locations of beryllium multiplier and tritium breeder during the operation of the NT-TBM （D-D and D-T phase in ITER）. This is important for st...Neutronics measurement system provides neutron fluxes and spectra at the locations of beryllium multiplier and tritium breeder during the operation of the NT-TBM （D-D and D-T phase in ITER）. This is important for studying and assessing capabilities of beryllium multiplier and tritium breeder in the China helium cooled solid breeder （CNHCSB）. A special neutron diagnostic system has been proposed that allows to measure neutron fluxes and spectra without interrupt the operation of ITER. This system includes encapsulated foil activation analysis, micro-fission chamber detectors （MFC）, and a compact neutron spectrometer using natural diamond detector （NDD）.展开更多
We propose a novel flow measurement method for gas–liquid two-phase slug flow by using the blind source separation technique. The flow measurement model is established based on the fluctuation characteristics of diff...We propose a novel flow measurement method for gas–liquid two-phase slug flow by using the blind source separation technique. The flow measurement model is established based on the fluctuation characteristics of differential pressure(DP) signals measured from a Venturi meter. It is demonstrated that DP signals of two-phase flow are a linear mixture of DP signals of single phase fluids. The measurement model is a combination of throttle relationship and blind source separation model. In addition, we estimate the mixture matrix using the independent component analysis(ICA) technique. The mixture matrix could be described using the variances of two DP signals acquired from two Venturi meters. The validity of the proposed model was tested in the gas–liquid twophase flow loop facility. Experimental results showed that for most slug flow the relative error is within 10%.We also find that the mixture matrix is beneficial to investigate the flow mechanism of gas–liquid two-phase flow.展开更多
Jet spreading width is one of the important characteristics of water jets discharging into the air.Many researchers have dealt with measuring this width,and contact measuring methods on the water jet surface were empl...Jet spreading width is one of the important characteristics of water jets discharging into the air.Many researchers have dealt with measuring this width,and contact measuring methods on the water jet surface were employed in a lot of the cases.In order to avoid undesirable effects caused by the contact on the jet surface,we introduce non-contact measuring methods with a laser instrument to the measurements of jet spreading width.In measurements,a transmitter emits sheet-like laser beam to a receiver.The water jet between the transmitter and the receiver interrupts the laser beam and makes a shadow.The minimum and maximum values of the shadow width are measured.In addition,pictures of the water jet are taken with a scale,and the shadow width is measured from the pictures.The experiments on various needle strokes were performed.Three kinds of width consistent with the jet structure were obtained.In the results,it can be concluded that our non-contact measuring methods are feasible.The data of jet spreading widths and jet taper were obtained and are useful for future applications.展开更多
A three node C^0 continuous isoparametric beam element is formulated to model the curved pipe conveying fluid in three dimensional configuration.The equations of motion for the combined structure and fluid domain incl...A three node C^0 continuous isoparametric beam element is formulated to model the curved pipe conveying fluid in three dimensional configuration.The equations of motion for the combined structure and fluid domain including added mass effect,Coriolis effect,centrifugal effect and the effect of pressure on the walls of pipe have been developed by Paidoussis.This equation is converted to finite element formulation using Galerkin technique and is validated with the results available from literature.展开更多
文摘Previous works have shown that the suction probe cannot be used to accurately measure the upward and downward particle fluxes independently. A new method using a single optical probe to measure the local solid flux is presented. The measurement of upward, downward and net solid fluxes was carried out in a cold model circulating fluidized bed (CFB) unit. The result shows that the profile of the net solid flux is in good agreement with the previous experimental data measured with a suction probe. The comparison between the average solid flux determined with the optical measuring system and the external solid flux was made, and the maximum deviationturned out to be 22%, with the average error being about 6.9%. These confirm that the optical fiber system can be successfully used to measure the upward, downward and net solid fluxes simultaneously by correctly processing the sampling signals obtained from the optical measuring system.
文摘According to the physical and chemical characteristics of superfine powder extinguishing agent,three test methods are selected to measure the flow ability.By studying and comparing various test methods,apparatus and conditions,the optimum method and conditions to test flow property of superfine powder extinguishing agent are confirmed.
文摘Neutronics measurement system provides neutron fluxes and spectra at the locations of beryllium multiplier and tritium breeder during the operation of the NT-TBM （D-D and D-T phase in ITER）. This is important for studying and assessing capabilities of beryllium multiplier and tritium breeder in the China helium cooled solid breeder （CNHCSB）. A special neutron diagnostic system has been proposed that allows to measure neutron fluxes and spectra without interrupt the operation of ITER. This system includes encapsulated foil activation analysis, micro-fission chamber detectors （MFC）, and a compact neutron spectrometer using natural diamond detector （NDD）.
基金Supported by the National Natural Science Foundation of China(51304231)the Natural Science Foundation of Shandong Province(ZR2010EQ015)
文摘We propose a novel flow measurement method for gas–liquid two-phase slug flow by using the blind source separation technique. The flow measurement model is established based on the fluctuation characteristics of differential pressure(DP) signals measured from a Venturi meter. It is demonstrated that DP signals of two-phase flow are a linear mixture of DP signals of single phase fluids. The measurement model is a combination of throttle relationship and blind source separation model. In addition, we estimate the mixture matrix using the independent component analysis(ICA) technique. The mixture matrix could be described using the variances of two DP signals acquired from two Venturi meters. The validity of the proposed model was tested in the gas–liquid twophase flow loop facility. Experimental results showed that for most slug flow the relative error is within 10%.We also find that the mixture matrix is beneficial to investigate the flow mechanism of gas–liquid two-phase flow.
文摘Jet spreading width is one of the important characteristics of water jets discharging into the air.Many researchers have dealt with measuring this width,and contact measuring methods on the water jet surface were employed in a lot of the cases.In order to avoid undesirable effects caused by the contact on the jet surface,we introduce non-contact measuring methods with a laser instrument to the measurements of jet spreading width.In measurements,a transmitter emits sheet-like laser beam to a receiver.The water jet between the transmitter and the receiver interrupts the laser beam and makes a shadow.The minimum and maximum values of the shadow width are measured.In addition,pictures of the water jet are taken with a scale,and the shadow width is measured from the pictures.The experiments on various needle strokes were performed.Three kinds of width consistent with the jet structure were obtained.In the results,it can be concluded that our non-contact measuring methods are feasible.The data of jet spreading widths and jet taper were obtained and are useful for future applications.
基金supported by All India Council for Technical Education[RPS grant No:8023/RID/RPS-24/2011-12]
文摘A three node C^0 continuous isoparametric beam element is formulated to model the curved pipe conveying fluid in three dimensional configuration.The equations of motion for the combined structure and fluid domain including added mass effect,Coriolis effect,centrifugal effect and the effect of pressure on the walls of pipe have been developed by Paidoussis.This equation is converted to finite element formulation using Galerkin technique and is validated with the results available from literature.
