Flow behaviors of spray forming low solvus high refractory (LSHR) alloy were investigated using hot compression tests performed on a Gleeble?3500 thermal mechanical simulator at temperatures of 1020?1150 °C and s...Flow behaviors of spray forming low solvus high refractory (LSHR) alloy were investigated using hot compression tests performed on a Gleeble?3500 thermal mechanical simulator at temperatures of 1020?1150 °C and strain rates of 0.0003?1.0 s?1. The constitutive equation was established, power dissipation (η) maps and hot processing maps were plotted. The microstructure evolution and dislocation distribution of domains with different values of η in power dissipation maps were also observed. The results show that the flow stress increases with decreasing temperature and increasing strain rate. The activation energy of the spray forming LSHR alloy is 1243.86 kJ/mol. When the value of η is 0.36 at the strain of 0.5, the domain in the processing map shows characteristics of typical dynamic recrystallization (DRX) and low dislocation density. According to the microstructure evolution and processing maps, the optimum processing condition for good hot workability of spray forming LSHR alloy can be summed up as:temperature range 1110?1150 °C; strain rate range 0.01?0.3 s?1.展开更多
In this paper, we propose a modified traffic model in which a single car moves through a sequence of traffic lights controlled by a step function instead of a sine function. In contrast to the previous work [Phys. Rev...In this paper, we propose a modified traffic model in which a single car moves through a sequence of traffic lights controlled by a step function instead of a sine function. In contrast to the previous work [Phys. Rev. E 70 （2004） 016107], we have investigated in detail the dependence of the behavior on four parameters, ω,α,η and α1, and given three kinds of bifurcation diagrams, which show three kinds of complex behaviors. We have found that in this model there are chaotic and complex periodic motions, as well as special singularities. We have also analyzed the characteristic of the complex period motion and the essential feature of the singularity.展开更多
基金Project(51301143)supported by the National Natural Science Foundation of ChinaProject(2014M560727)supported by the National Postdoctoral Foundation of China+1 种基金Project(2015GZ0228)supported by the Sichuan Province Science-Technology Support Plan,ChinaProject(2682014CX001)supported by the Science and Technology Innovation Project of SWJTU University,China
文摘Flow behaviors of spray forming low solvus high refractory (LSHR) alloy were investigated using hot compression tests performed on a Gleeble?3500 thermal mechanical simulator at temperatures of 1020?1150 °C and strain rates of 0.0003?1.0 s?1. The constitutive equation was established, power dissipation (η) maps and hot processing maps were plotted. The microstructure evolution and dislocation distribution of domains with different values of η in power dissipation maps were also observed. The results show that the flow stress increases with decreasing temperature and increasing strain rate. The activation energy of the spray forming LSHR alloy is 1243.86 kJ/mol. When the value of η is 0.36 at the strain of 0.5, the domain in the processing map shows characteristics of typical dynamic recrystallization (DRX) and low dislocation density. According to the microstructure evolution and processing maps, the optimum processing condition for good hot workability of spray forming LSHR alloy can be summed up as:temperature range 1110?1150 °C; strain rate range 0.01?0.3 s?1.
基金Prof. Z.R. Yang provided helpful guidance to this work. We are very thankful to Prof. Z.R. Yang and grateful to Profs. Z.G. Zheng, Z. Gao, and W.A. Guo, who provided many good suggestions to this work. We also acknowledge fruitful discussions with Drs. J.X. Le, X,M, Kong, X,H, Li, and J.Q. Tao.
文摘In this paper, we propose a modified traffic model in which a single car moves through a sequence of traffic lights controlled by a step function instead of a sine function. In contrast to the previous work [Phys. Rev. E 70 （2004） 016107], we have investigated in detail the dependence of the behavior on four parameters, ω,α,η and α1, and given three kinds of bifurcation diagrams, which show three kinds of complex behaviors. We have found that in this model there are chaotic and complex periodic motions, as well as special singularities. We have also analyzed the characteristic of the complex period motion and the essential feature of the singularity.
