An aluminum extrusion process is mainly used to fabricate long tubes, beams and rods for various applications. However, this process has a high production cost due to the need for investment of high-pressure machinery...An aluminum extrusion process is mainly used to fabricate long tubes, beams and rods for various applications. However, this process has a high production cost due to the need for investment of high-pressure machinery. The objective of this work is to develop a new semi-solid extrusion process using semi-solid slurry at low solid fractions. A laboratory extrusion system was used to fabricate aluminum rods with the diameter of 12 ram. The semi-solid metal process used in this study was the gas induced semi-solid （GISS） technique. To study the feasibility of the GISS extrusion process, the effects of extrusion parameters such as plunger speed and solid fi-action on the extrudability, microstructure, and mechanical properties of extruded samples were investigated. The results show that the plunger speed and solid fraction of the semi-solid metal need to be carefully controlled to produce complete extruded parts.展开更多
To discover the flow behavior in the endwall region and mechanism of plasma flow control on a highly loaded compressor cascade, distributions of static pressure coefficient, total pressure loss coefficient and streaml...To discover the flow behavior in the endwall region and mechanism of plasma flow control on a highly loaded compressor cascade, distributions of static pressure coefficient, total pressure loss coefficient and streamline pat- tern were investigated. Results show that cross flow from the pressure surface to neighboring suction surface ex- ists under pitch-wise pressure gradient. The deflected endwall boundary layer flow interacts with the incoming flow, and then both of them leave off the endwall in tile form of a span-wise vortex. Effect of angle of attack on static pressure is greater than that of free stream velocity. The distinct variations of total pressure loss with end- wall actuations are mainly located within the outer verge of a triangular area with high total pressure loss. Effect of pitch-vAse actuation on separated flows is much better than that of stream-wise actuation, and both enhance with the increase of angle of attack and actuation strength. An efficient method for plasma flow control in the endwall region is the increase of actuation strength, such as adjusting discharge voltage or changing plasma power supply.展开更多
基金the financial supports from Prince of Songkla University (Contract number AGR530031M)
文摘An aluminum extrusion process is mainly used to fabricate long tubes, beams and rods for various applications. However, this process has a high production cost due to the need for investment of high-pressure machinery. The objective of this work is to develop a new semi-solid extrusion process using semi-solid slurry at low solid fractions. A laboratory extrusion system was used to fabricate aluminum rods with the diameter of 12 ram. The semi-solid metal process used in this study was the gas induced semi-solid （GISS） technique. To study the feasibility of the GISS extrusion process, the effects of extrusion parameters such as plunger speed and solid fi-action on the extrudability, microstructure, and mechanical properties of extruded samples were investigated. The results show that the plunger speed and solid fraction of the semi-solid metal need to be carefully controlled to produce complete extruded parts.
基金provided by National Natural Science Foundation of China (No. 50906100 and 10972236)Foundation for the Author of National Excellent Doctoral Dissertation of PR China (No. 201172)Postgraduate Technology Innovation Foundation of Air Force Engineering University (No. DX2010103)
文摘To discover the flow behavior in the endwall region and mechanism of plasma flow control on a highly loaded compressor cascade, distributions of static pressure coefficient, total pressure loss coefficient and streamline pat- tern were investigated. Results show that cross flow from the pressure surface to neighboring suction surface ex- ists under pitch-wise pressure gradient. The deflected endwall boundary layer flow interacts with the incoming flow, and then both of them leave off the endwall in tile form of a span-wise vortex. Effect of angle of attack on static pressure is greater than that of free stream velocity. The distinct variations of total pressure loss with end- wall actuations are mainly located within the outer verge of a triangular area with high total pressure loss. Effect of pitch-vAse actuation on separated flows is much better than that of stream-wise actuation, and both enhance with the increase of angle of attack and actuation strength. An efficient method for plasma flow control in the endwall region is the increase of actuation strength, such as adjusting discharge voltage or changing plasma power supply.
