Highly Sensitive Photodetectors Based on WS_(2) Quantum Dots/GaAs Heterostructures

The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum dot(QDs)materials in a simple and convenient way to form a heterogeneous structure.Various performance enhancements have been realized through the formation of typeⅡenergy bands in heterostructures,opening up new research directions for the future development of photodetector devices.This work successfully fabricated a high-sensitivity photodetector based on WS_(2)QDs/GaAs NWs heterostructure.Under 660 nm laser excitation,the photodetector exhibits a responsivity of 368.07 A/W,a detectivity of 2.7×10^(12)Jones,an external quantum efficiency of 6.47×10^(2)%,a low-noise equivalent power of 2.27×10^(-17)W·Hz^(-1/2),a response time of 0.3 s,and a recovery time of 2.12 s.This study provides a new solution for the preparation of high-performance GaAs detectors and promotes the development of optoelectronic devices for GaAs NWs.

Citrate-stabilized CdSe/CdS quantum dots as fluorescence probe for protein determination

A rapid, ultrasensitive and convenient fluorescence measurement technology based on the enhancement of the fluorescence intensity resulting from the interaction of functionalized CdSe/CdS quantum dots （QDs） with bov/ne serum albumin （BSA） was proposed. The citrate-stabilized CdSe/CdS （QDs） were synthesized by using Se powder and Na2S as precursors instead of any pyrophoric organometallic precursors. The modified CdSe/CdS QDs are brighter and more stable against photobleaching in comparison with organic fluorophores. At pH 7.0, the fluorescence signal of CdSe/CdS is enhanced by increasing the concentration of BSA in the range of 0.1-10 μg/mL, and the low detection limit is 0.06 μg/mL. A linear relationship between the enhanced fluorescence peak intensity （△F） and BSA concentration （c） is established using equation △F=50.7c＋16.4 （R=0.996 36）. Results of determination for BSA in three synthetic samples are identical with the true values, and the recovery （98.9%-102.4%） and relative standard deviation （RSD, 1.8%-2.5%） are satisfactory.

Distributed Optical Fiber Sensor for Multi-point Temperature Measurement

The distributed optical fiber sensing technology is overviewed,which is based on Raman scattering light theory.Basic operation principle,structure,system characteristics and signal processing are discussed.This structure and method of the signal processing possess of certain spatial resolution,hence will ensure the practicability of system.

Research on Visual Detection Algorithm for Groove Feature Sizes by Means of Structured Light Projection

The visual inspection is an economical and effective method for welding. For measuring the feature sizes of grooves,a method based on line structured light is presented. Firstly,an adaptive algorithm to extract the subpixel centerline of structured light stripes is introduced to deal with the uneven width and grayscale distributions of laser stripes,which is based on the quadratic weighted grayscale centroid. By means of region-of-interest(ROI)division and image difference,an image preprocessing algorithm is developed for filtering noise and improving image quality. Furthermore,to acquire geometrical dimensions of various grooves and groove types precisely,the subpixel feature point extraction algorithm of grooves is designed. Finally, experimental results of feature size measuring show that the absolute error of measurement is 0.031—0.176 mm,and the relative error of measurement is 0.2%—3.6%.

A new optimal approach to segmentation of 2D range scans to line sections

In order to obtain a compact and exact representation of 2D range scans,UKF(unscented Kalman filter) and CDKF(central difference Kalman filter) were proposed for extracting the breakpoint of the laser data. Line extraction was performed in every continuous breakpoint region by detecting the optimal angle and the optimal distance in polar coordinates,and every breakpoint area was constructed with two points. As a proof to the method,an experiment was performed by a mobile robot equipped with one SICK laser rangefinder,and the results of UKF/CDKF in breakpoint detection and line extraction were compared with those of the EKF(extended Kalman filter) . The results show that the exact geometry of the raw laser data of the environments can be obtained by segmented raw measurements(combining the proposed breakpoint detection approach with the line extraction method) ,and method UKF is the best one compared with CDKF and EKF.

Enzymatic detection of ethanol based on H_2O_2-sensitive quantum dots

A rapid and sensitive fluorometric method for the enzymatic detection of ethanol using CdSe/ZnS quantum dots （QDs） is proposed. The photoluminescence of QDs is sensitive to H202. This finding leads to a novel approach for the determination of ethanol using alcohol oxidase （AOx） which, on oxidation of ethanol, produces H202. The method has higher sensitivity, wider analytical range （0.1-8 mmol/L）, and a lower detection limit （0.05 mmol/L）. The relationship between quenching of the photoluminescence of the QDs and the concentration of ethanol is linear.

All-optical scheme for detecting the possible Majorana signature based on QD and nanomechanical resonator systems

Majorana fermions(MFs) are exotic particles that are their own anti-particles. Currently, the search for MFs occurring as quasiparticle excitations in condensed matter systems has attracted widespread interest, because of their importance in fundamental physics and potential applications in topological quantum computation based on solid-state devices. Motivated by recent experimental progress towards the detection and manipulation of MFs in hybrid semiconductor/superconductor heterostructures, in this review, we present a novel proposal to probe MFs in all-optical domain. We introduce a single quantum dot(QD), a hybrid quantum dot-nanomechanical resonators(QD-NR) system, and a carbon nanotube(CNT) resonator implanted in a single electron spin system with optical pump-probe technology to detect MFs, respectively. With this scheme, a possible Majorana signature is investigated via the probe absorption spectrum and nonlinear optical Kerr effect, and the coupling strength between MFs and the QD or the single electron spin is also determined. In the hybrid QD-NR system, vibration of the NR will enhance the nonlinear optical effect, which makes the MFs more sensitive for detection. In the CNT resonator with a single electron, the single electron spin can be considered as a sensitive probe, and the CNT resonator behaved as a phonon cavity is robust for detecting of MFs. This optical scheme will provide another method for the detection MFs and will open the door for new applications ranging from robust manipulation of MFs to quantum information processing based on MFs.

FasFast Triangulation and Local Optimization for Scan Data of Laser Radar

In order to study the triangulation for the point cloud data collected by three-dimensional laser radar,in accordance with the line-by-line characteristics of laser radar scanning,an improved Delaunay triangulation method is proposed to mesh the point cloud data as a triangulation irregular network.Based on the geometric topology location information among radar point cloud data,focusing on the position relationship between adjacent scanning line of the point data,a preliminary match network is obtained according to their geometric relationship.A reasonable triangulation network for the object surface is acquired after the use of local optimization on initial mesh by Delaunay rule.Meanwhile,a new judging rule is proposed to contrast the triangulation before and after the optimization on the network.The result shows that triangulation for point cloud with full use of its own characteristics can improve the speed of the algorithm obviously,and the rule for judging the triangulation can evaluate the quality of network.

Mn-doped ZnS quantum dots/methyl violet nanohybrids for room temperature phosphorescence sensing of DNA

Mn-doped ZnS quantum dots/methyl violet nanohybrids were explored to develop a novel room temperature phosphorescence (RTP) sensor for the detection of DNA. Methyl violet (MV) as the electron acceptors was adsorbed on the surface of the quantum dots (QDs) to quench the RTP of the Mn-doped ZnS QDs through an electron-transfer process under excitation. The addition of DNA recovered the RTP signal of the Mn-doped ZnS QDs due to the binding of MV with DNA and the removal of MV from the surface of the Mn-doped ZnS QDs. Under the optimal conditions, the enhanced RTP intensity of the Mn-doped ZnS QDs/MV nanohybrids linearly increased with the concentration of DNA from 0.08 to 12 mg L-1 with the detection limit of 33.6 μg L-1. The relative standard deviation for eleven replicate detections of the reagent blank was 3.7%. The developed method was applied to the detection of DNA in spiked urine samples with recoveries of 96%-103% without interference from nonspecific fluorescence.

A 3D measurement method based on multi-view fringe projection by using a turntable

In order to get the entire data in the optical measurement, a multi-view three-dimensional(3D) measurement method based on turntable is proposed. In the method, a turntable is used to rotate the object and obtain multi-view point cloud data, and then multi-view point cloud data are registered and integrated into a 3D model. The measurement results are compared with that of the sticking marked point method. Experimental results show that the measurement process of the proposed method is simpler, and the scanning speed and accuracy are improved.

SMS Fiber Structure for Temperature Measurement Using an OTDR

A singlemode-multimode-singlemode （SMS） fiber structure for temperature measurement using an optical time domain reflectometer （OTDR）-based interrogation system is proposed. A temperature measurement range of 40 ℃-195 ℃ with a resolution of 0.12 ℃ and a linearity of 0.992 could be achieved for the multimode fiber （MMF） graded index with a length of 60mm. It was also demonstrated that two-point temperature measurement with two SMS fiber structures as temperature sensors could be made. The proposed temperature measurement system offered a high resolution and also benefited from a simple configuration with a capability of multi-point temperature measurement.