用单光纤布拉格光栅实现应力和温度同时测量

本文提出一种新型的基于光纤布拉格光栅的传感器 ,实现应力和温度同时测量。将一个布拉格光栅刻写在掺铒 /钇光纤上 ,利用掺铒 /钇光纤放大器的自发放大发射能与温度的线性关系来确定温度的变化 ,通过测量布拉格光栅波长的偏移来确定应力的数值。用法布里—珀罗可调谐滤光器接收信息 ,可实现应力和温度的分离。实验获得的应力和温度的测量范围分别为 0～ 1 4 0 0 με和 4 5～ 1 80℃。

带有红外接口的移动式温度数据采集仪的研制

介绍了基于单片机的移动式温度数据采集仪的硬件设计,串行红外接口的应用及用可VB6.0实现的WINDOWS界面的数据接收、处理软件。

铂电阻测温非线性校正的两种新方法

根据正反馈原理 ,本文提出了铂电阻非线性校正基于级数展开和基于准相对误差最小的两种新方法 ,给出了参数设计的解析表达式 .设计及实际应用表明 ,这些方法简单、实用、有效 。

High-precision automatic measurement of two-dimensional geometric features based on machine vision

To realize high-precision automatic measurement of two-dimensional geometric features on parts, a cooperative measurement system based on machine vision is constructed. Its hardware structure, functional composition and working principle are introduced. The mapping relationship between the feature image coordinates and the measuring space coordinates is established. The method of measuring path planning of small field of view （FOV） images is proposed. With the cooperation of the panoramic image of the object to be measured, the small FOV images with high object plane resolution are acquired automatically. Then, the auxiliary measuring characteristics are constructed and the parameters of the features to be measured are automatically extracted. Experimental results show that the absolute value of relative error is less than 0. 03% when applying the cooperative measurement system to gauge the hole distance of 100 mm nominal size. When the object plane resolving power of the small FOV images is 16 times that of the large FOV image, the measurement accuracy of small FOV images is improved by 14 times compared with the large FOV image. It is suitable for high-precision automatic measurement of two-dimensional complex geometric features distributed on large scale parts.

Multipoint Infrared Telemetry System for Measuring the Piston Temperature in Internal Combustion Engines

A high precision, high antijamming multipoint infrared telemetry system was developed to measure the piston temperature in internal combustion engine. The temperature at the measuring point is converted into corresponding voltage signal by the thermo-couple first. Then after the V/F stage, the voltage signal is converted into the frequency signal to drive the infrared light-emitting diode to transmit infrared pulses. At the receiver end, a photosensitive audion receives the infrared pulses. After conversion, the voltage recorded by the receiver stands for the magnitude of temperature at the measuring point. Test results of the system indicate that the system is practical and the system can perform multipoint looping temperature measurements for the piston.

实用低温温度计的快速定标

实用低温温度计的快速定标王长顺作为低温实验技术的基础实验．实用低温温度计的定标．是利用标准低温铂电阻温度计对铜—康铜热电偶低温温计在氮的三相点６３．１５Ｋ至１００Ｋ的温度范围内定标，所用标准铂电阻温度计的主要技术指标和计温方法可参阅１９８３年化工部光...

新型成群温度监测系统

新型成群温度监测系统北京五洲仪器与控制有限公司（１０００８０）周顺昌１概述成群温度测量与控制系统是各行各业应用较广的系统，特别是采用热电阻（铂电阻，铜电阻）作为测温元件更具普遍性。随着技术的进步，此类系统的设计也应更新换代。本文向用户介绍一种经济、实...

Use of casing and its effect on pressure cells

Although pressure cells have been produced and installed successfully for decades,the accuracy of measured pressure is often inadequate.Due to large differences between the stiffness of pressure cells and the surrounding media,there is a considerable difference between applied pressure and that measured from pressure cells.It is often difficult and expensive to make a pressure cell with stiffness（modulus of elasticity） similar to the surrounding material in which it will be embedded.In order to improve this situation,a casing material with proportional dimensions is recommended as a means to obtain reliable results.In our study,the effect of using casing in the installation of pressure cells is investigated,providing the characteristics of casing.Some practical recommendations are presented to improve the accuracy of the results using casing.

Error Analysis and Accuracy Assessment of GPS Absolute Velocity Determination without SA

Error sources which decrease the accuracy of GPS in absolute velocity determination have been changed since SA was turned off. Firstly, quantities of all kinds of error sources that influence velocity deter-mination are analyzed. The potential accuracy of GPS absolute velocity determination is derived from both theory and field GPS data simulation. After that, two tests were carried out to evaluate the performance of GPS absolute velocity determination in the case of a static and an airborne GPS receiver and INS (Inertial Navigation System) instrument in kinematic mode. In static mode, the receiver velocity has been estimated to be several mm/s with the carrier-phase derived Doppler measurements, and several cm/s with the receiver generated Doppler measurements. In kinematic mode, GPS absolute velocity estimates are compared with the synchronized measurements from the high accuracy INS. The root mean square statistics of the velocity discrepancies between GPS and INS come up to dm/s. Moreover, it has a strong correlation with the accel-eration or jerk of the aircraft.

Flow Field Around Rushton Turbine in Stirred Tank by Particle Image Velocimetry Measurement

In this paper, particle image velocimetry (PIV) was used to measure the mean and root meansquare(RMS) velocity in the stirred tank with six-flat blade Rushton turbine and with no baffles. Two typesof motion patterns were studied. One was that the impeller runs at constant speed, the other was that the impellerruns at time-dependent speed and in a periodic way. The emphasis of the paper was on the comparison of meanand RMS velocity vector maps and profiles between these two types of motion patterns, and especial attention waspaid to the comparison of the mean velocity, time-averaged RMS velocity, phase averaged RMS velocity betweenthe constant 3 RPS (revolution per second) and time-dependent operation. The Reynolds number was between 763and 1527. The study explained the mechanism that time-dependent RPS is more efficient for mixing than that ofconstant RPS.

Measurement Method of the Thickness Uniformity for Polymer Films

Several methods for investigating the thickness uniformity of polymer thin films are presented as well as their measurement principles. A comparison of these experimental methods is given.The cylindrical lightwave reflection method is found to can obtain the thickness distribution along a certain direction.It is a simple and suitable method to evaluate the film thickness uniformity.

A Note on a Misuirewicz's Theorem

In this paper,we improve a Misuirewicz's theorem and give a new proof of small conjecture on topological entropy.

Inversion of thicknesses of multi-layered structures from eddy current testing measurements

Luquire et al. ' s impedance change model of a rectangular cross section probe coil above a structure with an arbitrary number of parallel layers was used to study the principle of measuring thicknesses of multi-layered structures in terms of eddy current testing voltage measurements. An experimental system for multi-layered thickness measurement was developed and several fitting models to formulate the relationships between detected impedance/voltage measurements and thickness are put forward using least square method. The determination of multi-layered thicknesses was investigated after inversing the voltage outputs of the detecting system. The best fitting and inversion models are presented.

Selection of Measured Signals in the Navigation Measuring Complex

To increase accuracy of navigation parameters,a perspective measuring complex with intellectual components is developed.Conception of synthesis optimal structure of the measuring complex is realized basing on a selective method using principles of the functional systems.Selection of measured information is finished by original numeric criterion of observation level of state vector components.Prediction is realized by algorithm of self-organization that makes synthesis of the optimal complication.Therefore mechanism of self-regulation is realized and accuracy of the selective navigation complex is increased.

CHARACTER OF RETROREFLECTOR’S LIGHT FIELD’S ENERGY DISTRIBUTION AND ITS MEASURING TECHNOLOGY

The formation of the retroreflected light field is introduced in the paper and the components of the retroreflected light field are analyzed.Furthermore,a deep analysis of the factors affecting energy distribution of the retroreflected light,such as design deviation,angle of incidence,was made.The simulation of the retroreflected light field was done.Recommendation is made in detail on both the energy distribution of the retroreflected light field at different working distances and the energy distribution of the retroreflected light field at a short distance when the diverging light comes.At last,two kinds of measuring instrument for the retroreflector are introduced,one is the long tunnel measuring instrument,the other is the minitype measuring instrument based on the character of the retroreflector when the diverging light comes.

Effects of retrogression heating rate on microstructures and mechanical properties of aluminum alloy 7050

The effects of the retrogression heating rate(340℃/min,57℃/min,4.3℃/min)on the microstructures and mechanical properties of aluminum alloy 7050 were investigated by means of hardness measurement,tensile properties testing,differential scanning calorimetry(DSC)and transmission electron microscopy(TEM).The results show that the retrogression heating rate significantly affects the microstructures and mechanical properties of the alloys treated by retrogression and re-aging(RRA)process, and it is found that the medium rate(57℃/min)leads to the highest mechanical properties.The strengthening phases in the matrix are mainly the fine dispersed η′precipitates and GP zones,and the grain boundary precipitates are coarse and discontinuous η phases.

Coefficient of earth pressure at rest for normal,consolidated soils

In this study consecutive consolidated isotropically drained triaxial tests for the coefficient of earth pressure at rest(K_0) were carried out to investigate its rules of evolution as well as its strength characteristics for normal,consolidated saturated silt under high pressure.The tests results indicate that:1) for normal,consolidated saturated silt,K_0 values increase as the consolidation stress increases at high pressure levels,while the nonlinear characteristics of K_0 are inconspicuous compared to cohesive soils;2) the Jaky and Roscoe equations,used to calculate K_0,are only suitable for certain soils,but cannot represent these values for normal, consolidated saturated silt due to the variation in bilinear strength at high pressure;and 3) there are close relations between the nonlinear characteristics of K_0 and the void ratio,measured in the tests.Both share the same functional form while under pressure. Based on our experimental results,we developed an empirical linear model to interpret the rules of nonlinear variation for the coefficient of earth pressure at rest.

Development of a Three-Dimensional Measuring System for Neonates' Head and Facial Morphology

A web camera based multi-camera convergent close-range photogrammetric system is developed to obtain the neonates＇ head and facial morphology. The data will then be used to develop a secure and good-fitting eye-patch protector for neonates, particularly whoa they are exposed to bright lights such as phototherapy light. Measurements obtained by the system are evaluated and validated against data obtained from optical scanning. Results show that the photogrammetric system meets the requirements of measuring accuracy and safety for neonate in the neonatal units.

Evaluation of an interferometric distance meter

This paper discussed the main parameters contributing to the measurement uncertainty of interferometric distance meter （IDM）. A simple and robust set-up is used to measure distance of about 12 cm with an expanded uncertainty （ k = 2） of ±16.4 μm. The measurement uncertainty is found to be limited by the wavelength measurement accuracy. This set-up can be used to measure distances up to 56 m. It also enables easy determination of the point of equal path difference between the measuring and the reference arms. LabVIEW program is used for counting of the fringes and applying fast Fourier transfor- mation （FFT） to perform frequency selective filtration to the noise. Although the reported uncertainty does not represent the state-of-art uncertainty reached for similar distance, the measurement provides traceable measurement to the unit of length, the meter.

Limnological instrumentation in the middle of the 19^(th) century:the first temperature and density profiles measured in the Dead Sea

The first modem survey of the Dead Sea was performed by the Geological Survey of Israel in 1959-1960, and the report published remains the baseline study for our understanding of the physical and chemical properties of the lake. At the time the Dead Sea was a meromictic lake with a strong salinity gradient separating the deep waters （〉40 m depth） from the less saline surface waters. A few results of analyses of deeper water samples collected in the 1930s were reported, but overall we have very little information about the structure of the lake＇s water column before the 1959-1960 survey. However, it is little known that data on the physical and the chemical structure of the Dead Sea water column were obtained already in the middle of the 19~ century, and the information collected then is highly relevant for the reconstruction of the limnological properties of the lake in earlier times. The expedition of Lieutenant William Lynch （U.S. Navy） in 1848 reported the presence of a temperature minimum at a depth of-18 m, and also retrieved a water sample collected close to the bottom for chemical analysis. In 1864, the French Dead Sea exploration by the Duc de Luynes and his crew yielded detailed density and salinity profiles for a number of sampling stations. The results of these pioneering studies are discussed here, as well as the sampling equipment and measuring instruments used by the 1848 and the 1864 expeditions.