A method was proposed to evaluate the real-time reliability for a single product based on damaged measurement degradation data.Most researches on degradation analysis often assumed that the measurement process did not...A method was proposed to evaluate the real-time reliability for a single product based on damaged measurement degradation data.Most researches on degradation analysis often assumed that the measurement process did not have any impact on the product's performance.However,in some cases,the measurement process may exert extra stress on products being measured.To obtain trustful results in such a situation,a new degradation model was derived.Then,by fusing the prior information of product and its own on-line degradation data,the real-time reliability was evaluated on the basis of Bayesian formula.To make the proposed method more practical,a procedure based on expectation maximization (EM) algorithm was presented to estimate the unknown parameters.Finally,the performance of the proposed method was illustrated by a simulation study.The results show that ignoring the influence of the damaged measurement process can lead to biased evaluation results,if the damaged measurement process is involved.展开更多
To control movement,the brain has to integrate proprioceptive information from a variety of mechanoreceptors.The role of proprioception in daily activities,exercise,and sports has been extensively investigated,using d...To control movement,the brain has to integrate proprioceptive information from a variety of mechanoreceptors.The role of proprioception in daily activities,exercise,and sports has been extensively investigated,using different techniques,yet the proprioceptive mechanisms underlying human movement control are still unclear.In the current work we have reviewed understanding of proprioception and the three testing methods:threshold to detection of passive motion,joint position reproduction,and active movement extent discrimination,all of which have been used for assessing proprioception.The origin of the methods,the different testing apparatus,and the procedures and protocols used in each approach are compared and discussed.Recommendations are made for choosing an appropriate technique when assessing proprioceptive mechanisms in different contexts.展开更多
The new sustainable tillage system needs new machines which are the combination of well accepted disc harrow and cultivator or chisel/ripper. To find the type of ripper shank we have done a research program with 7 dif...The new sustainable tillage system needs new machines which are the combination of well accepted disc harrow and cultivator or chisel/ripper. To find the type of ripper shank we have done a research program with 7 different shape and size tools. The geometrical parameters were determined in laboratory, the performance （loosening effect, depth etc） and draft requirements were measured on loamy soil stubble field （the speed range： 2.5-7.5 krrdh）. Developing a combined evaluation system-based on performance and draft data-to select the most favorable shank type for our condition was found one which has the following features： the size of the point： rake angle = 25°, length = 240 mm, width = 80mm; the equation of the shank curve： y = axb, where a = 2-3.5 and b = 0.04-0.05.展开更多
In this paper a critical review is presented of the history and current state of the art of J-integral resistance curve testing and experimental evaluation methods in conjunction with a discussion of the development o...In this paper a critical review is presented of the history and current state of the art of J-integral resistance curve testing and experimental evaluation methods in conjunction with a discussion of the development of the plane strain fracture toughness test standard ASTM E1820 developed by American Society for Testing and Materials (ASTM). Early research efforts on this topic are reviewed first. These include the J-integral concept, experimental estimates of the J-integral for stationary cracks, load line displacement (LLD) and crack mouth opening displacement (CMOD) based η factor equations, different formulations of J-integral incremental equations for growing cracks, crack growth corrected J-R curve determination, and experimental test methods. Recent developments in J-R curve testing and evaluation are then described, with emphasis on accurate J-integral incremental equations, a normalization method, a modified basic method, a CMOD direct method with use of incremental equations, relationships of plastic geometry factors, constraint-dependent J-R curve testing and correction approaches. An overview of the present fracture toughness test standard ASTM E1820-08a is then presented. The review shows that after more than 40 years of investigation and development, the J-integral resistance curve test methods in ASTM E1820 have become simpler, more cost-effective and more accurate.展开更多
基金Project(60904002)supported by the National Natural Science Foundation of China
文摘A method was proposed to evaluate the real-time reliability for a single product based on damaged measurement degradation data.Most researches on degradation analysis often assumed that the measurement process did not have any impact on the product's performance.However,in some cases,the measurement process may exert extra stress on products being measured.To obtain trustful results in such a situation,a new degradation model was derived.Then,by fusing the prior information of product and its own on-line degradation data,the real-time reliability was evaluated on the basis of Bayesian formula.To make the proposed method more practical,a procedure based on expectation maximization (EM) algorithm was presented to estimate the unknown parameters.Finally,the performance of the proposed method was illustrated by a simulation study.The results show that ignoring the influence of the damaged measurement process can lead to biased evaluation results,if the damaged measurement process is involved.
基金the University of Canberra,Key Laboratory of Exercise and Health Sciences of Ministry of Education,Shanghai University of Sport and Shanghai Municipal Science and Technology Commission (No.13490503800)supported by Shanghai Pujiang Program (No.15PJ1407600)
文摘To control movement,the brain has to integrate proprioceptive information from a variety of mechanoreceptors.The role of proprioception in daily activities,exercise,and sports has been extensively investigated,using different techniques,yet the proprioceptive mechanisms underlying human movement control are still unclear.In the current work we have reviewed understanding of proprioception and the three testing methods:threshold to detection of passive motion,joint position reproduction,and active movement extent discrimination,all of which have been used for assessing proprioception.The origin of the methods,the different testing apparatus,and the procedures and protocols used in each approach are compared and discussed.Recommendations are made for choosing an appropriate technique when assessing proprioceptive mechanisms in different contexts.
文摘The new sustainable tillage system needs new machines which are the combination of well accepted disc harrow and cultivator or chisel/ripper. To find the type of ripper shank we have done a research program with 7 different shape and size tools. The geometrical parameters were determined in laboratory, the performance （loosening effect, depth etc） and draft requirements were measured on loamy soil stubble field （the speed range： 2.5-7.5 krrdh）. Developing a combined evaluation system-based on performance and draft data-to select the most favorable shank type for our condition was found one which has the following features： the size of the point： rake angle = 25°, length = 240 mm, width = 80mm; the equation of the shank curve： y = axb, where a = 2-3.5 and b = 0.04-0.05.
文摘In this paper a critical review is presented of the history and current state of the art of J-integral resistance curve testing and experimental evaluation methods in conjunction with a discussion of the development of the plane strain fracture toughness test standard ASTM E1820 developed by American Society for Testing and Materials (ASTM). Early research efforts on this topic are reviewed first. These include the J-integral concept, experimental estimates of the J-integral for stationary cracks, load line displacement (LLD) and crack mouth opening displacement (CMOD) based η factor equations, different formulations of J-integral incremental equations for growing cracks, crack growth corrected J-R curve determination, and experimental test methods. Recent developments in J-R curve testing and evaluation are then described, with emphasis on accurate J-integral incremental equations, a normalization method, a modified basic method, a CMOD direct method with use of incremental equations, relationships of plastic geometry factors, constraint-dependent J-R curve testing and correction approaches. An overview of the present fracture toughness test standard ASTM E1820-08a is then presented. The review shows that after more than 40 years of investigation and development, the J-integral resistance curve test methods in ASTM E1820 have become simpler, more cost-effective and more accurate.
