The key techniques in indoor positioning based on visible light communication and the state of the art of this research were surveyed. First, the significance of indoor positioning based on visible light communication...The key techniques in indoor positioning based on visible light communication and the state of the art of this research were surveyed. First, the significance of indoor positioning based on visible light communication from two aspects of the limitations of current indoor positioning technology and the advantages of visible light communication was discussed; And then, the main four technology of indoor positioning based on visible light communication were summarized and the triangulation of RSS method and the principle of image positioning were introduced in detail; Next, the performance characteristics of various typical algorithms were compared and analyzed; In the end, several suggestions on future research of indoor positioning based on visible light communication were given.展开更多
Internet of things has been widely applied to industrial control, smart city and environmental protection, in these applica- tion scenarios, sensing node needs to make real-time response to the feedback control of the...Internet of things has been widely applied to industrial control, smart city and environmental protection, in these applica- tion scenarios, sensing node needs to make real-time response to the feedback control of the application layer. Therefore, it is nec- essary to monitor whether or not awareness nodes are trusted in real time, but the existing mechanisms for trusted certification lack the real-time measurement and tracking of the sensing node. To solve the above problems, this paper proposes a dynamic metric based authentication mechanism for sensing nodes of Internet of things. Firstly, the dynamic trustworthiness measure of the sensing nodes is carried out by introducing the computational function such as the trust function, the trust- worthiness risk assessment function, the feed- back control function and the active function of the sensing node. The dynamic trustworthi- ness measure of sensing nodes from multiple dimensions can effectively describe the change of trusted value of sensing nodes. Then, on the basis of this, a trusted attestation based on node trusted measure is realized by using the revocable group signature mechanism of local verifier. The mechanism has anonymity, un- forgeability and traceability, which is proved the security in the standard model. Simulationexperiments show that the proposed trusted attestation mechanism is flexible, practical and ef｜Scient and has better attack resistance. It can effectively guarantee the reliable data transmission of nodes and realize the dynamic tracking of node reliability, which has a lower impact on system performance.展开更多
To automatically detecting whether a person is wearing mask properly,we propose a face mask detection algorithm based on hue-saturation-value(HSV)+histogram of oriented gradient(HOG)features and support vector machine...To automatically detecting whether a person is wearing mask properly,we propose a face mask detection algorithm based on hue-saturation-value(HSV)+histogram of oriented gradient(HOG)features and support vector machines(SVM).Firstly,human face and five feature points are detected with RetinaFace face detection algorithm.The feature points are used to locate to mouth and nose region,and HSV+HOG features of this region are extracted and input to SVM for training to realize detection of wearing masks or not.Secondly,RetinaFace is used to locate to nasal tip area of face,and YCrCb elliptical skin tone model is used to detect the exposure of skin in the nasal tip area,and the optimal classification threshold can be found to determine whether the wear is properly according to experimental results.Experiments show that the accuracy of detecting whether mask is worn can reach 97.9%,and the accuracy of detecting whether mask is worn correctly can reach 87.55%,which verifies the feasibility of the algorithm.展开更多
Today, just by activating a button on the display panel of a total station, one can measure horizontal and vertical angles or calculate distances and coordinates of points. For this reason, it has become necessary to ...Today, just by activating a button on the display panel of a total station, one can measure horizontal and vertical angles or calculate distances and coordinates of points. For this reason, it has become necessary to improve the check of a total station in order to respond to its contemporary way of use. The aim of this research is to create a new method for checking total stations using only one check--field, in a different way of the today＇s standards. The basic principle, of the comparison of an instrument＇s measurements to those of another instrument with higher accuracy, is implemented into a mathematical model such as the adjustment of an indoor geodetic network. Thus, the check of the proper function of a total station is applied. An a-priori calculation Of^o of the network＇s adjustment can be calculated by modeling the uncertainties using statistical methods as the random number generators by means of the Monte Carlo method. The prospective ao can then be compared to the a-posteriori ao provided by the adjustment of the measurements which are carried out by using the total station under check.展开更多
The article describes design peculiarities of the novel compact vacuum circuit breaker with rated voltage 40.5 kV. The design incorporates several novel technical solutions： polycarbonate support insulation, mono-sta...The article describes design peculiarities of the novel compact vacuum circuit breaker with rated voltage 40.5 kV. The design incorporates several novel technical solutions： polycarbonate support insulation, mono-stable magnetic actuator, labyrinth pulling insulator, core-type flexible contact and new compact vacuum interrupter （VI）. Phases are encapsulated into silicone rubber providing required creepage distance and excellent tracking resistance. These novelties along with extensive modeling of the mechanical and electrical fields followed by design optimization resulted in weight reduction of more than 50% compared with alternatives available in the market. And this is in spite of built in sensors measuring： phase currents, zero-sequence current, phase voltages.展开更多
基金supported by National Nature Science Foundation of China (No. 61373124)supported by China Scholarship Funds (2014CB3033)
文摘The key techniques in indoor positioning based on visible light communication and the state of the art of this research were surveyed. First, the significance of indoor positioning based on visible light communication from two aspects of the limitations of current indoor positioning technology and the advantages of visible light communication was discussed; And then, the main four technology of indoor positioning based on visible light communication were summarized and the triangulation of RSS method and the principle of image positioning were introduced in detail; Next, the performance characteristics of various typical algorithms were compared and analyzed; In the end, several suggestions on future research of indoor positioning based on visible light communication were given.
基金supported by the National Natural Science Foundation of China (The key trusted running technologies for the sensing nodes in Internet of things: 61501007, The research of the trusted and security environment for high energy physics scientific computing system: 11675199)General Project of science and technology project of Beijing Municipal Education Commission: KM201610005023+2 种基金the outstanding personnel training program of Beijing municipal Party Committee Organization Department (The Research of Trusted Computing environment for Internet of things in Smart City: 2014000020124G041)The key technology research and validation issue for the emergency treatment telemedicine public service platform which integrates the military and civilian and bases on the broadband wireless networks (No.2013ZX03006001-005)the issue belongs to Major national science and technology projects
文摘Internet of things has been widely applied to industrial control, smart city and environmental protection, in these applica- tion scenarios, sensing node needs to make real-time response to the feedback control of the application layer. Therefore, it is nec- essary to monitor whether or not awareness nodes are trusted in real time, but the existing mechanisms for trusted certification lack the real-time measurement and tracking of the sensing node. To solve the above problems, this paper proposes a dynamic metric based authentication mechanism for sensing nodes of Internet of things. Firstly, the dynamic trustworthiness measure of the sensing nodes is carried out by introducing the computational function such as the trust function, the trust- worthiness risk assessment function, the feed- back control function and the active function of the sensing node. The dynamic trustworthi- ness measure of sensing nodes from multiple dimensions can effectively describe the change of trusted value of sensing nodes. Then, on the basis of this, a trusted attestation based on node trusted measure is realized by using the revocable group signature mechanism of local verifier. The mechanism has anonymity, un- forgeability and traceability, which is proved the security in the standard model. Simulationexperiments show that the proposed trusted attestation mechanism is flexible, practical and ef｜Scient and has better attack resistance. It can effectively guarantee the reliable data transmission of nodes and realize the dynamic tracking of node reliability, which has a lower impact on system performance.
基金National Natural Science Foundation of China(No.519705449)。
文摘To automatically detecting whether a person is wearing mask properly,we propose a face mask detection algorithm based on hue-saturation-value(HSV)+histogram of oriented gradient(HOG)features and support vector machines(SVM).Firstly,human face and five feature points are detected with RetinaFace face detection algorithm.The feature points are used to locate to mouth and nose region,and HSV+HOG features of this region are extracted and input to SVM for training to realize detection of wearing masks or not.Secondly,RetinaFace is used to locate to nasal tip area of face,and YCrCb elliptical skin tone model is used to detect the exposure of skin in the nasal tip area,and the optimal classification threshold can be found to determine whether the wear is properly according to experimental results.Experiments show that the accuracy of detecting whether mask is worn can reach 97.9%,and the accuracy of detecting whether mask is worn correctly can reach 87.55%,which verifies the feasibility of the algorithm.
文摘Today, just by activating a button on the display panel of a total station, one can measure horizontal and vertical angles or calculate distances and coordinates of points. For this reason, it has become necessary to improve the check of a total station in order to respond to its contemporary way of use. The aim of this research is to create a new method for checking total stations using only one check--field, in a different way of the today＇s standards. The basic principle, of the comparison of an instrument＇s measurements to those of another instrument with higher accuracy, is implemented into a mathematical model such as the adjustment of an indoor geodetic network. Thus, the check of the proper function of a total station is applied. An a-priori calculation Of^o of the network＇s adjustment can be calculated by modeling the uncertainties using statistical methods as the random number generators by means of the Monte Carlo method. The prospective ao can then be compared to the a-posteriori ao provided by the adjustment of the measurements which are carried out by using the total station under check.
文摘The article describes design peculiarities of the novel compact vacuum circuit breaker with rated voltage 40.5 kV. The design incorporates several novel technical solutions： polycarbonate support insulation, mono-stable magnetic actuator, labyrinth pulling insulator, core-type flexible contact and new compact vacuum interrupter （VI）. Phases are encapsulated into silicone rubber providing required creepage distance and excellent tracking resistance. These novelties along with extensive modeling of the mechanical and electrical fields followed by design optimization resulted in weight reduction of more than 50% compared with alternatives available in the market. And this is in spite of built in sensors measuring： phase currents, zero-sequence current, phase voltages.
