The two-phase detection method for directional discrimination in laser Doppler measurements is discussed.The diffraction efficiency of a sin- gle period rectangular phase grating is analysed and a kind of back-scatter...The two-phase detection method for directional discrimination in laser Doppler measurements is discussed.The diffraction efficiency of a sin- gle period rectangular phase grating is analysed and a kind of back-scattered laser Doppler vibrometer without directional ambiguity using the single peri- od rectangular phase grating as the beam-combiner described.The principles of this kind of vibrometer are explained in detail,and some experimental re- sults are given.In this kind of vibrometer,the rectangular phase grating, without the zero diffracted order and even orders,is used to eliminate use- less stray light and to combine the useful signal light.Differential electronics is employed to reject signal noise.Therefore,the signal-to-noise ratio of Doppler signals and the measurement accuracy of the instrument are im- proved and the range of application is expanded.展开更多
In this paper, a 2-D airlift reactor was developed. The streamline and hydrodynamic parameters were measured in a 2-D airlift loop reactor(ALR)with different draft baffles. Three regimes were observed under different ...In this paper, a 2-D airlift reactor was developed. The streamline and hydrodynamic parameters were measured in a 2-D airlift loop reactor(ALR)with different draft baffles. Three regimes were observed under different conditions. Particle image velocimetry(PIV)measurement showed that the liquid velocity distribution in horizontal direction presented different profiles in the three regimes. The length, the height and the spacing of draft baffles were applied in the experiments to optimize the ALR structure. It was found that the draft tube structure is of great importance in determining the hydrodynamics of ALRs. Additionally, the experimental results may serve as a step to the further optimization and design of ALR.展开更多
Application of simple and locally based erosion assessment methods that fit to the local condition is necessary to improve the performance and efficiency of soil conservation practices. In this study, rill erosion for...Application of simple and locally based erosion assessment methods that fit to the local condition is necessary to improve the performance and efficiency of soil conservation practices. In this study, rill erosion formation and development was investigated on the topo-sequence of three catchments （300-500 m slope length）; and on agricultural fields （6 m and 24 m slope lengths） with different crop-tillage surfaces during erosive storms. Rill density and rill erosion rates were measured using rill cross section survey and close range digital photogrammetry. Rill formation and development was commonly observed on conditions where there is wider terrace spacing, concave slope shapes and unstable stone terraces on steep slopes. At field plot level, rill development was controlled by the distribution and abrupt change in the soil surface roughness and extent of slope length. At catchment scale, however, rill formation and development was controlled by landscape structures, and concavity and convexity of the slope. Greater rill cross sections and many small local rills were associated to the rougher soil surfaces. For instance, relative comparison of crop tillage practices have showed that faba-bean tillage management was more susceptible to seasonal rill erosion followed by Teff and wheat tillage surfaces under no cover condition. Surface roughness and landscape structures played a net decreasing effect on the parallel rill network development. This implies that spatial and temporal variability of the rill prone areas was strongly associated with the nature and initial size of surface micro-topography or tillage roughness. Thus, it is necessary to account land management practices, detail micro-topographic surfaces and landscape structures for improved prediction of rill prone areas under complex topographic conditions. Application of both direct rill cross section survey and close range digital photogrammetric techniques could enhance field erosion assessment for practical soil conservation improvement.展开更多
Three progressive stages of testing techniques are elaborated,which are en-tirely manual operating,taking separate instruments testing and computer program con-trolling.The testing method and principle are detailed ba...Three progressive stages of testing techniques are elaborated,which are en-tirely manual operating,taking separate instruments testing and computer program con-trolling.The testing method and principle are detailed based on the testing process formeteorological parameters,air pressure,air quality and rotating velocity.And every testingtechnique is analyzed.Finally, the technique outlook is viewed.All this plays a leading rolein development of the testing techniques.展开更多
The paper presents the design and technological aspects on the high speed electrical machines which include the mechanical radial and axial strees because of the centrifugal forces. It presents a reverse structure wit...The paper presents the design and technological aspects on the high speed electrical machines which include the mechanical radial and axial strees because of the centrifugal forces. It presents a reverse structure with outlet rotor and inlet stator that have high speed 20.000 rpm-24.000 rpm and power 1 kW for the pecific of the ventilanting centrifugal fan domain. This unconventional type of machine is not still in the phase of specific tests.展开更多
文摘The two-phase detection method for directional discrimination in laser Doppler measurements is discussed.The diffraction efficiency of a sin- gle period rectangular phase grating is analysed and a kind of back-scattered laser Doppler vibrometer without directional ambiguity using the single peri- od rectangular phase grating as the beam-combiner described.The principles of this kind of vibrometer are explained in detail,and some experimental re- sults are given.In this kind of vibrometer,the rectangular phase grating, without the zero diffracted order and even orders,is used to eliminate use- less stray light and to combine the useful signal light.Differential electronics is employed to reject signal noise.Therefore,the signal-to-noise ratio of Doppler signals and the measurement accuracy of the instrument are im- proved and the range of application is expanded.
基金Supported by the National Natural Science Foundation of China(No.21406157)
文摘In this paper, a 2-D airlift reactor was developed. The streamline and hydrodynamic parameters were measured in a 2-D airlift loop reactor(ALR)with different draft baffles. Three regimes were observed under different conditions. Particle image velocimetry(PIV)measurement showed that the liquid velocity distribution in horizontal direction presented different profiles in the three regimes. The length, the height and the spacing of draft baffles were applied in the experiments to optimize the ALR structure. It was found that the draft tube structure is of great importance in determining the hydrodynamics of ALRs. Additionally, the experimental results may serve as a step to the further optimization and design of ALR.
基金the Austrian Academic Exchange Service (OAD) for financially supporting this study
文摘Application of simple and locally based erosion assessment methods that fit to the local condition is necessary to improve the performance and efficiency of soil conservation practices. In this study, rill erosion formation and development was investigated on the topo-sequence of three catchments （300-500 m slope length）; and on agricultural fields （6 m and 24 m slope lengths） with different crop-tillage surfaces during erosive storms. Rill density and rill erosion rates were measured using rill cross section survey and close range digital photogrammetry. Rill formation and development was commonly observed on conditions where there is wider terrace spacing, concave slope shapes and unstable stone terraces on steep slopes. At field plot level, rill development was controlled by the distribution and abrupt change in the soil surface roughness and extent of slope length. At catchment scale, however, rill formation and development was controlled by landscape structures, and concavity and convexity of the slope. Greater rill cross sections and many small local rills were associated to the rougher soil surfaces. For instance, relative comparison of crop tillage practices have showed that faba-bean tillage management was more susceptible to seasonal rill erosion followed by Teff and wheat tillage surfaces under no cover condition. Surface roughness and landscape structures played a net decreasing effect on the parallel rill network development. This implies that spatial and temporal variability of the rill prone areas was strongly associated with the nature and initial size of surface micro-topography or tillage roughness. Thus, it is necessary to account land management practices, detail micro-topographic surfaces and landscape structures for improved prediction of rill prone areas under complex topographic conditions. Application of both direct rill cross section survey and close range digital photogrammetric techniques could enhance field erosion assessment for practical soil conservation improvement.
文摘Three progressive stages of testing techniques are elaborated,which are en-tirely manual operating,taking separate instruments testing and computer program con-trolling.The testing method and principle are detailed based on the testing process formeteorological parameters,air pressure,air quality and rotating velocity.And every testingtechnique is analyzed.Finally, the technique outlook is viewed.All this plays a leading rolein development of the testing techniques.
文摘The paper presents the design and technological aspects on the high speed electrical machines which include the mechanical radial and axial strees because of the centrifugal forces. It presents a reverse structure with outlet rotor and inlet stator that have high speed 20.000 rpm-24.000 rpm and power 1 kW for the pecific of the ventilanting centrifugal fan domain. This unconventional type of machine is not still in the phase of specific tests.
