Taiwan Island is at the joint of Eurasian Continent and Pacific Plate, under threatening of typhoons and northeasterly strong winds. Consequently, enormous human lives and properties are lost every year. It is necessa...Taiwan Island is at the joint of Eurasian Continent and Pacific Plate, under threatening of typhoons and northeasterly strong winds. Consequently, enormous human lives and properties are lost every year. It is necessary to develop a coastal sea-state monitoring system. This paper introduces the coastal sea-state monitoring system （CSMS） along Taiwan coast. The COMC （Coastal Ocean Monitoring Center in National Cheng Kung University） built the Taiwan coastal sea-state monitoring system, which is modern and self-sufficient, consisting of data buoy, pile station, tide station, coastal weather station, and radar monitoring station. To assure the data quality, Data Quality Check Procedure （DQCP） and Standard Operation Procedure （SOP） were developed by the COMC. In further data analysis and data implementation of the observation, this paper also introduces some new methods that make the data with much more promising uses. These methods include empirical mode decomposition （EMD） used for the analysis of storm surge water level, wavelet transform used for the analysis of wave characteristics from nearshore X-band radar images, and data assimilation technique applied in wave nowcast operation. The coastal sea-state monitoring system has a great potential in providing ocean information to serve the society.展开更多
A large-scale bloom occurred from May to June in 2011 in sea area near Qinhuangdao of the Bohai Sea, leading to huge damage of the scallop culture industry. Similar blooms have been observed in this region for three y...A large-scale bloom occurred from May to June in 2011 in sea area near Qinhuangdao of the Bohai Sea, leading to huge damage of the scallop culture industry. Similar blooms have been observed in this region for three years. The causative species of the bloom, which dominated the phytoplankton community with the maximum cell density around 109 cell/L, could not be identified with morphological features due to the small cell size （-2 μm）. A pigment analytical method was then adopted to analyze the pigment profile of the phytoplankton samples collected from the blooming sea area. It was found that pico-sized （〈2 μm）, nano-sized （2-20 μm）, and bulk phytoplankton samples had similar pigment profile, representing the pigment signature of the bloom-causative species. The major pigments detected included 19-butanoyloxyfucoxanthin （But-fuco）, fucoxanthin （Fuco）, diadinoxanthin （Diad） and chlorophyll a （Chl a）, and high content of But-fuco was the most significant characteristics of the phytoplankton samples. Based on the pigment composition and content, the bloom-causative species could be tentatively identified as pelagophyte, ＂type 8＂ group of haptophyte, or silicoflagellate. Some unique features of the bloom, such as the extremely high cell density, small-sized and But-fuco containing cells, occurring in early summer, and the feeding-cessation effects on scallops, suggest it be a ＂brown tide＂ event similar to those reported in the east coast of the United States of America. The recurrent ＂brown tide＂ events and their dramatic impacts on the shellfish mariculture industry in QirLhuangdao need close attention in the coming years.展开更多
To reduce the difficulty of material filling into the top region of tooth in hot precision forging of gears using the alternative die designs, relief-cavity designs in different sizes were performed on the top of die ...To reduce the difficulty of material filling into the top region of tooth in hot precision forging of gears using the alternative die designs, relief-cavity designs in different sizes were performed on the top of die tooth. The influences of the conventional process and relief-cavity designs on corner filling, workpiece stress, die stress, forming load and material utilization were examined. Finite element simulation for tooth forming, die stress and forming load using the four designs was performed. The material utilization was further considered, and the optimal design was determined. The tooth form and forming load in forging trials ensured the validity of FE simulation. Tooth accuracy was inspected by video measuring machine(VMM), which shows the hot forged accuracy achieves the level of rough machining of gear teeth. The effects of friction on mode of metal flow and strain distribution were also discussed.展开更多
A glass crusher was developed to improve the waste glass crushing process.The waste glass was recycled,crushed and sieved to different particle sizes as glass aggregates,and the surface of glass aggregates was treated...A glass crusher was developed to improve the waste glass crushing process.The waste glass was recycled,crushed and sieved to different particle sizes as glass aggregates,and the surface of glass aggregates was treated by nano-Fe2O3 suspension to improve the anti-striping property.The glasphalt mixture made by partly replacing mineral aggregates with glass aggregates was designed and evaluated.The sizes of glass aggregates were selected to be 2.36 and 4.75 mm,and the optimum concentration of nano-Fe2O3 suspension was determined to be 10%.The optimum asphalt content(OAC)was determined by the Marshall method and the glass aggregate content.The influence of the glass aggregate content on the technical properties of glasphalt mixtures were analyzed by the rutting test,three-point bending test,freeze-thaw splitting test and skid resistance test.The results show that the optimal content of glass aggregates and OAC are recommended to be 15%and 4.4%,respectively.These environmentally-friendly glasphalt mixtures can solve the problem of environmental pollution caused by waste glass,as well as reducing the cost of pavement materials and construction.展开更多
Characteristics of interaction between di-2-ethylhexyl phthalate(DEHP) and particulate in a eutrophic lake were studied in this paper. DEHP concentrations ranged from 89.9 to 247 μg/L with an average value of 146 μg...Characteristics of interaction between di-2-ethylhexyl phthalate(DEHP) and particulate in a eutrophic lake were studied in this paper. DEHP concentrations ranged from 89.9 to 247 μg/L with an average value of 146 μg/L in subsurface water (SSW) samples, and from 82.0 to 390 μg/L with an average value of 211 μg/L in water surface microlayer (SM) samples. The results indicate that there was only a weak correlation between the DEHP concentrations and suspended particulate material(SPM) concentrations in both SSW and SM, while the significant correlation between DEHP concentrations and chlorophyll a concentrations was found, which suggestes that DEHP was principally bound to phytoplankton in the eutrophic lake. Correlation between DEHP concentrations and total phosphor (TP) concentrations was also found in this investigation.Enrichment factors (EF) of DEHP in SM were in the range of 0.85 to 2.12 with an average value of 1.35. DEHP EFs were significantly related to the enrichment of chlorophyll a in SM. The results suggest that the enrichment of DEHP in SM of this eutrophic lake was mainly due to DEHP accumulation in phytoplankton and was controlled by distribution of phytoplankton between SM and SSW.展开更多
The present paper presents an algorithm and a program for plotting the clarifying curves and for determination of the specific amount of settled material during the initial period based on data obtained from sedimenta...The present paper presents an algorithm and a program for plotting the clarifying curves and for determination of the specific amount of settled material during the initial period based on data obtained from sedimentation experiments in stationary column of aqueous suspensions of solids particles with different concentrations. The algorithm and program have been developed for an interactive, rapid and convenient processing of the data obtained from sedimentation experiments in stationary column of aqueous suspensions of solids particles and allow obtaining with accuracy of precise and expressive graphs which characterize the behaviour of aqueous suspensions to sedimentation in stationary column. Sedimentation study of different aqueous suspensions of solids particles in stationary column is of great importance for experimentally determining the important parameters required to design and exploitation clarifiers and sludge thickeners from waste water treatment plants.展开更多
Stuffing box is commonly used in oilfield. It is a component of a pumping unit. When the pumping unit＇ s polish rod moves up and down repeatedly, the stuffing box can play a role in sealing so as to prevent the liqui...Stuffing box is commonly used in oilfield. It is a component of a pumping unit. When the pumping unit＇ s polish rod moves up and down repeatedly, the stuffing box can play a role in sealing so as to prevent the liquid in the oil well flom leaking. However, there can be friction, called ＂eccentric wear＂ , between the polish rod and stuffing box for some reason during their relative movements. This paper proposed specific solution through analyzing this phenomenon.展开更多
With the world economic development, population growth and improvement of people＇ s living standard, the energy shortage has become the core issue of restricting the development of the world economy. China faces seri...With the world economic development, population growth and improvement of people＇ s living standard, the energy shortage has become the core issue of restricting the development of the world economy. China faces serious energy crisis and environmental problems, so the development of biofuels in China is vital. This paper introduces the advantages of duckweed for energy production, summarizes the research results of Chengdu Institute of Biology on duckweed, and provides the direction of its further studv.展开更多
Phosphoric acid obtained by the wet process is laden with impurities which limit its use in fertilizers. To expand its range of use, various methods have been proposed to purify it which range from simple fading-clari...Phosphoric acid obtained by the wet process is laden with impurities which limit its use in fertilizers. To expand its range of use, various methods have been proposed to purify it which range from simple fading-clarification to more complex operations. These processes include essentially the liquid-liquid extraction, chemical precipitation, ion flotation, adsorption on activated carbon, ion exchange resins. However, the use of these techniques is limited to a number of disadvantages such as high operational cost, environmental pollution, complicated process, limited effectiveness, etc.. Our contribution for this domain （purification of wet-phosphoric acid） consists to use clays which could be adsorbent materials alternative to both economic and less polluting. These are phyllosilicates which have a large adsorption capacity due to their large specific surface and their surface charge. In this study, we will detail the processes which present great importance for the treatment of wet phosphoric acid.展开更多
基金supported by National Natural Science Foundation of China (Grant No. 51109075)Fundamental Research Funds for the Central Universities (Grant No. 2011B05814)Doctoral Fund of Ministry of Education of China (Grant No. 20100094120008)
文摘Taiwan Island is at the joint of Eurasian Continent and Pacific Plate, under threatening of typhoons and northeasterly strong winds. Consequently, enormous human lives and properties are lost every year. It is necessary to develop a coastal sea-state monitoring system. This paper introduces the coastal sea-state monitoring system （CSMS） along Taiwan coast. The COMC （Coastal Ocean Monitoring Center in National Cheng Kung University） built the Taiwan coastal sea-state monitoring system, which is modern and self-sufficient, consisting of data buoy, pile station, tide station, coastal weather station, and radar monitoring station. To assure the data quality, Data Quality Check Procedure （DQCP） and Standard Operation Procedure （SOP） were developed by the COMC. In further data analysis and data implementation of the observation, this paper also introduces some new methods that make the data with much more promising uses. These methods include empirical mode decomposition （EMD） used for the analysis of storm surge water level, wavelet transform used for the analysis of wave characteristics from nearshore X-band radar images, and data assimilation technique applied in wave nowcast operation. The coastal sea-state monitoring system has a great potential in providing ocean information to serve the society.
基金Supported by the Knowledge Innovation Program of Chinese Academy of Sciences (No. KZCX2-YW-Q07-04)the National Basic Research Priority Program of the Ministry of Science and Technology of China (No.2010CB428705)+2 种基金the Innovation Research Group Program of the Natural Science Foundation of China (No. 41121064)the Joint China-India Collaboration Project of the Natural Science Foundation of China (No.40811140535)the North Sea Environmental Monitoring Center (NSEMC) of the State Ocean Administration
文摘A large-scale bloom occurred from May to June in 2011 in sea area near Qinhuangdao of the Bohai Sea, leading to huge damage of the scallop culture industry. Similar blooms have been observed in this region for three years. The causative species of the bloom, which dominated the phytoplankton community with the maximum cell density around 109 cell/L, could not be identified with morphological features due to the small cell size （-2 μm）. A pigment analytical method was then adopted to analyze the pigment profile of the phytoplankton samples collected from the blooming sea area. It was found that pico-sized （〈2 μm）, nano-sized （2-20 μm）, and bulk phytoplankton samples had similar pigment profile, representing the pigment signature of the bloom-causative species. The major pigments detected included 19-butanoyloxyfucoxanthin （But-fuco）, fucoxanthin （Fuco）, diadinoxanthin （Diad） and chlorophyll a （Chl a）, and high content of But-fuco was the most significant characteristics of the phytoplankton samples. Based on the pigment composition and content, the bloom-causative species could be tentatively identified as pelagophyte, ＂type 8＂ group of haptophyte, or silicoflagellate. Some unique features of the bloom, such as the extremely high cell density, small-sized and But-fuco containing cells, occurring in early summer, and the feeding-cessation effects on scallops, suggest it be a ＂brown tide＂ event similar to those reported in the east coast of the United States of America. The recurrent ＂brown tide＂ events and their dramatic impacts on the shellfish mariculture industry in QirLhuangdao need close attention in the coming years.
基金Project(51375042)supported by the National Natural Science Foundation of ChinaProject supported by Beijing Laboratory of Modern Transport Metal Materials and Processing Technology,China
文摘To reduce the difficulty of material filling into the top region of tooth in hot precision forging of gears using the alternative die designs, relief-cavity designs in different sizes were performed on the top of die tooth. The influences of the conventional process and relief-cavity designs on corner filling, workpiece stress, die stress, forming load and material utilization were examined. Finite element simulation for tooth forming, die stress and forming load using the four designs was performed. The material utilization was further considered, and the optimal design was determined. The tooth form and forming load in forging trials ensured the validity of FE simulation. Tooth accuracy was inspected by video measuring machine(VMM), which shows the hot forged accuracy achieves the level of rough machining of gear teeth. The effects of friction on mode of metal flow and strain distribution were also discussed.
基金The Project of the Department of Science&Technology of Shaanxi Province(No.2016KJXX-69,2016ZDJC-24,2017KCT-13)China Postdoctoral Science Foundation(No.2017M620434)the Special Fund for Basic Scientific Research of Central College of Chang’an University(No.310821153502,310821173501)
文摘A glass crusher was developed to improve the waste glass crushing process.The waste glass was recycled,crushed and sieved to different particle sizes as glass aggregates,and the surface of glass aggregates was treated by nano-Fe2O3 suspension to improve the anti-striping property.The glasphalt mixture made by partly replacing mineral aggregates with glass aggregates was designed and evaluated.The sizes of glass aggregates were selected to be 2.36 and 4.75 mm,and the optimum concentration of nano-Fe2O3 suspension was determined to be 10%.The optimum asphalt content(OAC)was determined by the Marshall method and the glass aggregate content.The influence of the glass aggregate content on the technical properties of glasphalt mixtures were analyzed by the rutting test,three-point bending test,freeze-thaw splitting test and skid resistance test.The results show that the optimal content of glass aggregates and OAC are recommended to be 15%and 4.4%,respectively.These environmentally-friendly glasphalt mixtures can solve the problem of environmental pollution caused by waste glass,as well as reducing the cost of pavement materials and construction.
文摘Characteristics of interaction between di-2-ethylhexyl phthalate(DEHP) and particulate in a eutrophic lake were studied in this paper. DEHP concentrations ranged from 89.9 to 247 μg/L with an average value of 146 μg/L in subsurface water (SSW) samples, and from 82.0 to 390 μg/L with an average value of 211 μg/L in water surface microlayer (SM) samples. The results indicate that there was only a weak correlation between the DEHP concentrations and suspended particulate material(SPM) concentrations in both SSW and SM, while the significant correlation between DEHP concentrations and chlorophyll a concentrations was found, which suggestes that DEHP was principally bound to phytoplankton in the eutrophic lake. Correlation between DEHP concentrations and total phosphor (TP) concentrations was also found in this investigation.Enrichment factors (EF) of DEHP in SM were in the range of 0.85 to 2.12 with an average value of 1.35. DEHP EFs were significantly related to the enrichment of chlorophyll a in SM. The results suggest that the enrichment of DEHP in SM of this eutrophic lake was mainly due to DEHP accumulation in phytoplankton and was controlled by distribution of phytoplankton between SM and SSW.
文摘The present paper presents an algorithm and a program for plotting the clarifying curves and for determination of the specific amount of settled material during the initial period based on data obtained from sedimentation experiments in stationary column of aqueous suspensions of solids particles with different concentrations. The algorithm and program have been developed for an interactive, rapid and convenient processing of the data obtained from sedimentation experiments in stationary column of aqueous suspensions of solids particles and allow obtaining with accuracy of precise and expressive graphs which characterize the behaviour of aqueous suspensions to sedimentation in stationary column. Sedimentation study of different aqueous suspensions of solids particles in stationary column is of great importance for experimentally determining the important parameters required to design and exploitation clarifiers and sludge thickeners from waste water treatment plants.
文摘Stuffing box is commonly used in oilfield. It is a component of a pumping unit. When the pumping unit＇ s polish rod moves up and down repeatedly, the stuffing box can play a role in sealing so as to prevent the liquid in the oil well flom leaking. However, there can be friction, called ＂eccentric wear＂ , between the polish rod and stuffing box for some reason during their relative movements. This paper proposed specific solution through analyzing this phenomenon.
文摘With the world economic development, population growth and improvement of people＇ s living standard, the energy shortage has become the core issue of restricting the development of the world economy. China faces serious energy crisis and environmental problems, so the development of biofuels in China is vital. This paper introduces the advantages of duckweed for energy production, summarizes the research results of Chengdu Institute of Biology on duckweed, and provides the direction of its further studv.
文摘Phosphoric acid obtained by the wet process is laden with impurities which limit its use in fertilizers. To expand its range of use, various methods have been proposed to purify it which range from simple fading-clarification to more complex operations. These processes include essentially the liquid-liquid extraction, chemical precipitation, ion flotation, adsorption on activated carbon, ion exchange resins. However, the use of these techniques is limited to a number of disadvantages such as high operational cost, environmental pollution, complicated process, limited effectiveness, etc.. Our contribution for this domain （purification of wet-phosphoric acid） consists to use clays which could be adsorbent materials alternative to both economic and less polluting. These are phyllosilicates which have a large adsorption capacity due to their large specific surface and their surface charge. In this study, we will detail the processes which present great importance for the treatment of wet phosphoric acid.
