海上油气田岸电替代海电工程经济评价体系构建

目前中国海上油气田开发供电方式发生了由海电向岸电转变的重要变革,研究岸电替代海电的经济评价体系可以为合理真实反映不同供电方式的经济性提供重要依据。本研究针对岸电与海电的差异特点,对比分析岸电与海电的成本构成,构建岸电经济评价体系,分析影响岸电项目经济性的主要因素,对科学评价和分析岸电经济性具有指导性意义。

海上平台岸电替代海电的工业可行性与经济效益

海上平台由于其远离陆地,一般采用海上发动机进行发电,通过海上平台自采的油气资源,利用自备发电机进行能量转换。中海油作为国内采用岸电替代海电的开创者,于2021年,首先在渤海部分油田进行了小规模岸电应用,是中国目前唯一一家通过岸电为平台供电的企业。对海电成本、岸电成本进行对比分析,建立了岸电替代海电的工业经济效益评价体系,能够为后续南海、东海油田的岸电推广提供借鉴和指导,为后续海上平台供电方式的选择提供决策参考。

The biofilm characteristics and enhanced performance of a marine microbial-electrolysis-cell-based biosensor under positive anodic potential

Microbial fuel cells have already been used as biosensors to monitor assimilable organic carbon(AOC).However,their signal production from AOC is known to be completely suppressed by dissoved oxygen(DO).In this study,two identical microbial electrolysis cell(MEC)based biosensors were inoculated with marine sediment and operated at two different anodic potentials,namely-300 mV and+250 mV relative to Ag/AgCl.The MEC biosensor operated under positive anodic potential conditions had electrochemically active microbial communities on the anode,including members of the Shewanellaceae,Pseudoalteromonadaceae,and Clostridiaceae families.However,the strictly anaerobic members of the Desulfuromonadaceae,Desulfobulbaceae and Desulfobacteraceae families were found only in the negative anodic potential MEC biosensor.The positive anodic potential MEC biosensor showed several other advantages as well,such as faster start-up,significantly higher maximum current production,fivefold improvement in the AOC detection limit,and tolerance of low dissolved oxygen,compared to those obtained from the negative anodic potential MEC biosensor.The developed positive anodic potential MEC biosensor can thus be used as a real-time and inexpensive detector of AOC concentrations in high saline and low DO seawater.

A seafloor electromagnetic receiver for marine magnetotellurics and marine controlled-source electromagnetic sounding

In planning and executing marine controlled-source electromagnetic methods, seafloor electromagnetic receivers must overcome the problems of noise, clock drift, and power consumption. To design a receiver that performs well and overcomes the abovementioned problems, we performed forward modeling of the E-field abnormal response and established the receiver＇s characteristics. We describe the design optimization and the properties of each component, that is, low-noise induction coil sensor, low-noise Ag/AgCI electrode, low-noise chopper amplifier, digital temperature-compensated crystal oscillator module, acoustic telemetry modem, and burn wire system. Finally, we discuss the results of onshore and offshore field tests to show the effectiveness of the developed seafloor electromagnetic receiver and its performance： typical E-field noise of 0.12 nV/m/rt（Hz） at 0.5 Hz, dynamic range higher than 120 dB, clock drift lower than 1 ms/day, and continuous operation of at least 21 days.

Towing characteristics of large-scale composite bucket foundation for offshore wind turbines

In order to study the towing dynamic properties of the large-scale composite bucket foundation the hydrodynamic software MOSES is used to simulate the dynamic motion of the foundation towed to the construction site.The MOSES model with the prototype size is established as the water draft of 5 and 6 m under the environmental conditions on site.The related factors such as towing force displacement towing accelerations in six degrees of freedom of the bucket foundation and air pressures inside the bucket are analyzed in detail.In addition the towing point and wave conditions are set as the critical factors to simulate the limit conditions of the stable dynamic characteristics.The results show that the large-scale composite bucket foundation with reasonable subdivisions inside the bucket has the satisfying floating stability.During the towing process the air pressures inside the bucket obviously change little and it is found that the towing point at the waterline is the most optimal choice.The characteristics of the foundation with the self-floating towing technique are competitive for saving lots of cost with few of the expensive types of equipment required during the towing transportation.

Singularity-free Green's function for EM sources embedded in a stratified medium

We present a method to unify the calculation of Green＇s functions for an electromagnetic（EM） transmitting source embedded in a homogeneous stratified medium.A virtual interface parallel to layer interfaces is introduced through the source location.The potentials for Green＇s function are derived by decomposing the partial wave solutions to Helmholtz＇s equations into upward and downward within boundaries.The amplitudes of the potentials in each stratum are obtained recursively from the initial amplitudes at the source level.The initial amplitudes are derived by coupling with the transmitting sources and following the discontinuity of the tangential electric and magnetic fields at the source interface.Only the initial terms are related to the transmitting sources and thus need to be modified for different transmitters,whereas the kernel connected with the stratified media stays unchanged.Hence,the present method can be easily applied to EM transmitting sources with little modification.The application of the proposed method to the marine controlled-source electromagnetic method（MCSEM） demonstrates its simplicity and flexibility.

Microstructures and electrochemical corrosion properties of Mg-Al-Pb and Mg-Al-Pb-Ce anode materials

Mg-Al-Pb alloy is a good candidate for the anode material of magnesium seawater battery. For improving the low current utilization efficiency of Mg-Al-Pb alloy, the influence of Ce on the microstructures and electrochemical corrosion properties in a 3.5% NaCl solution was investigated using scanning electron microscope and electrochemical measurements. The results indicate that Ce refines the grain structure of Mg-Al-Pb alloy. The formation of strip Al11Ce3 second phase promotes the uniform distribution of Mg17Al12 phase in Mg-Al-Pb-Ce alloy. The addition of cerium accelerates the discharge activity of Mg-Al-Pb alloy. Due to a large number of cathodic Al11Ce3 and MglyAla2 phases, Ce promotes the micro-galvanic corrosion and leads to larger corrosion current density and hydrogen evolution rate in Mg-Al-Pb-Ce alloy than those in Mg-Al-Pb alloy. However, Mg-Al-Pb alloy expresses smaller utilization efficiency than Mg-Al-Pb-Ce alloy because of grain detachment.

Electrochemical properties of magnesium alloy anodes discharged in seawater

Magnesium alloys can be developed as anode materials for seawater activated batteries. The electrochemical properties of AZ31, AP65 and Mg-3%Ga-2%Hg alloy anodes discharged in seawater were studied. The potentiodynamic polarization shows that the Mg-3%Ga-2%Hg alloy provides more negative corrosion potentials than AZ31 or AP65 alloy. The galvanostatic discharge results show that the Mg-3%Ga-2%Hg alloy exhibits good electrochemical properties as anodes in seawater. And the EIS studies reveal that the magnesium alloy anode/seawater interfacial process is determined by an activation controlled reaction. The Mg3Hg and Mg21Ga5Hg3 phases in Mg-3%Ga-2%Hg alloy improve its electrochemical properties better than the Mg17（Al,Zn）12 phase in AZ31 and Mg（Pb） solid solution phase in AP65 alloys.

Forward modeling of marine DC resistivity method for a layered anisotropic earth

Since the ocean bottom is a sedimentary environment wherein stratification is well developed, the use of an anisotropic model is best for studying its geology. Beginning with Maxwell＇s equations for an anisotropic model, we introduce scalar potentials based on the divergence-free characteristic of the electric and magnetic （EM） fields. We then continue the EM fields down into the deep earth and upward into the seawater and couple them at the ocean bottom to the transmitting source. By studying both the DC apparent resistivity curves and their polar plots, we can resolve the anisotropy of the ocean bottom. Forward modeling of a high-resistivity thin layer in an anisotropic half-space demonstrates that the marine DC resistivity method in shallow water is very sensitive to the resistive reservoir but is not influenced by airwaves. As such, it is very suitable for oil and gas exploration in shallowwater areas but, to date, most modeling algorithms for studying marine DC resistivity are based on isotropic models. In this paper, we investigate one-dimensional anisotropic forward modeling for marine DC resistivity method, prove the algorithm to have high accuracy, and thus provide a theoretical basis for 2D and 3D forward modeling.

Discharge behavior and electrochemical properties of Mg-Al-Sn alloy anode for seawater activated battery

Mg-Al-Sn alloy is one of the new developed anode materials for seawater activated batteries. The potentiodynamic polarization, galvanostatic discharge and electrochemical impedance spectroscopy of Mg-6%Al-1%Sn and Mg-6%Al-5%Sn(mass fraction) alloys in seawater were studied and compared with the commercial AZ31 and AP65 alloys. The results show that the Mg-6%Al-1%Sn alloy obtains the most negative discharge potential of average-1.611V with a electric current density of 100 mA/cm2. EIS studies reveal that the Mg-Al-Sn alloy/seawater interfacial electrochemical process is determined by an activation controlled reaction. The assembled prototype batteries with Mg-6%Al-1%Sn alloy as anodes and Ag Cl as cathodes exhibit a satisfactory integrated discharge properties.

Geophone-seabed coupling effect and its correction

By summing geophone and hydrophone data with opposite polarity responses to water layer reverberation,the ocean bottom cable dual-sensor acquisition technique can effectively eliminate reverberation,broaden the frequency bandwidth,and improve both the resolution and fidelity of the seismic data.It is thus widely used in industry.However,it is difficult to ensure good coupling of the geophones with the seabed because of the impact of ocean flow,seafloor topography,and field operations;therefore,geophone data are seriously affected by the transfer function of the geophone-seabed coupling system.As a result,geophone data frequently have low signal-to-noise ratios（S/N）,which causes large differences in amplitude,frequency,and phases between geophone and hydrophone data that severely affect dual-sensor summation.In contrast,the hydrophone detects changes in brine pressure and has no coupling issues with the seabed;thus,hydrophone data always have good S/N.First,in this paper,the mathematical expression of the transfer function between geophone and seabed is presented.Second,the transfer function of the geophone-seabed is estimated using hydrophone data as reference traces,and finally,the coupling correction based on the estimated transfer function is implemented.Using this processing,the amplitude and phase differences between geophone and hydrophone data are removed,and the S/N of the geophone data are improved.Synthetic and real data examples then show that our method is feasible and practical.

Effect of acetylcholine on pain-related electric activities in hippocampal CA1 area of normal and morphinistic rats

Objective To examine the effect of acetylcholine（ACh）on the electric activities of pain-excitation neurons （PEN）and pain-inhibitation neurons（PIN）in the hippocampal CA1 area of normal rats or morphinistic rats,and to explore the role of ACh in regulation of pain perception in CA1 area under normal condition and morphine addiction.Methods The trains of electric impulses applied to sciatic nerve were set as noxious stimulation.The discharges of PEN and PIN in the CA l area were recorded extracellularly by glass microelectrode.We observed the influence of intracerebroventricular （i.c.v.）injection of ACh and atropine on the noxious stimulation-evoked activities of PEN and PIN in the CA1 area.Results Noxious stimulation enhanced the electric activity of PEN and depressed that of PIN in the CA1 area of both normal and addiction rats.In normal rats,ACh decrease the pain-evoked discharge frequency of PEN,while increased the frequency of PIN.These effects reached the peak value at 4 min after injection of ACh.In morphinistic rats,ACh also inhibited the PEN electric activity and potentialized the PIN electric activity,but the maximum effect appeared at 6 min after administration. The ACh-induced responses were significantly blocked by muscarinic receptor antagonist atropine.Conclusion Cholinergic neurons and muscarinic receptors in the hippocampal CA1 area are involved in the processing of nociceptive information and they may play an analgesia role in pain modulation.Morphine addiction attenuated the sensitivity of painrelated neurons to the noxious information.

PROTECTION OF ELECTROACUPUNCTURE ON HIPPOCAMPAL INJURY INDUCED BY QUINOLINIC ACID IN RATS

Objective To probe into the protective mechanism of electro-acupuncture （EA） on anti-oxygen stress in dementia-model rats. Methods A total of 30 male SD rats of cleaning grade were randomized into three groups, named sham-operation （n = 10）, model （n = 10）, model＋ EA （n = 10）. The dementia-model rat was made with hippocampal GA1 lesions by quinolinic acid （QA）. On the second day of modeling, in model＋ EA group, EA （3 Hz, 2-4 mA, continuous waves） was applied to ＂Dàzhuī＂ （大椎 GV 14） and ＂Shènshū＂ （肾俞 BL 23） for 10 min. The capability of learning and memory was evaluated by step-down test to observe the changes of nitric oxide （NO）, nitric oxide synthase （NOS） activity, superoxide dismutase （SOD） activity and malondialdehyde （MDA） of the hippocampal tissues in rats separately by biochemical methods. Results EA improved learning and memory of dementia rats with hippocampal CA1 lesions induced by QA at different degrees. It significantly increased SOD activity, reduced MDA content and improved NO level and NOS activity. Conclusion EA improves significantly the learning and memory of the dementia rats due to hippocampal CA1 lesions induced by QA, which is probably relevant with the anti-oxygen stress of EA.

Electrotransformation of Thermotoga maritima MS8

[Objective] The aim was to study on the electrotransformation of Thermotoga maritima MS8.[Method] Square waves,exponential waves and high voltage shock were used for the electrotransformation of T.maritima MS8,and the obtained transformants were detected by PCR.[Result] A single square electric pulse could be applied to cell sample in 0.2 cm ET cuvettes by using a Bio-Rad Gene Pulser set at 150 V,25 ms at room temperature,but the transformation efficiency was very low.[Conclusion] This research may improve the transformation efficiency of T.maritima MS8.

Research on 3D marine electromagnetic interferometry with synthetic sources for suppressing the airwave interference

In order to suppress the airwave noise in marine controlled-source electromagnetic （CSEM） data, we propose a 3D deconvolution （3DD） interferometry method with a synthetic aperture source and obtain the relative anomaly coefficient （RAC） of the EM field reflection responses to show the degree for suppressing the airwave. We analyze the potential of the proposed method for suppressing the airwave, and compare the proposed method with traditional methods in their effectiveness. A method to select synthetic source length is derived and the effect of the water depth on RAC is examined via numerical simulations. The results suggest that 3DD interferometry method with a synthetic source can effectively suppress the airwave and enhance the potential of marine CSEM to hydrocarbon exploration.

Application of CEDA and ASPIC computer packages to the hairtail (Trichiurus japonicus) fishery in the East China Sea

Surplus-production models are widely used in fish stock assessment and fisheries management due to their simplicity and lower data demands than age-structured models such as Virtual Population Analysis. The CEDA (catch-effort data analysis) and ASPIC (a surplus-production model incorporating covariates) computer packages are data-fitting or parameter estimation tools that have been developed to analyze catch-and-effort data using non-equilibrium surplus production models. We applied CEDA and ASPIC to the hairtail (Trichiurus japonicus) fishery in the East China Sea. Both packages produced robust results and yielded similar estimates. In CEDA, the Schaefer surplus production model with log-normal error assumption produced results close to those of ASPIC. CEDA is sensitive to the choice of initial proportion, while ASPIC is not. However, CEDA produced higher R 2 values than ASPIC.

occurrence and microscopic analyses of multicellular magnetotactic prokaryotes from coastal sediments in the Yellow Sea

Multicellular magnetotactic prokaryotes （MMPs） are a group of aggregates composed of 7-45 gram-negative cells synthesizing intracellular magnetic crystals. Although they are thought to be globally distributed, MMPs have been observed only in marine environments in America and Europe. Most MMPs share a rosette-like morphology and biomineralize iron sulfide crystals. In the present study, abundant MMPs were observed, with a density of 26 ind./cm^3, in the sediments of a coastal lagoon, Lake Yuehu, in the Yellow Sea. Optical microscopy showed that all of them were rosette shaped with a diameter of 5.5±0.8 μm. Transmission electron microscopy revealed that these MMPs were composed of 10- 16 ovoid cells and flagellated peritrichously. High-resolution transmission electron microscopy and energy dispersive X-ray analysis indicated that they biomineralized bullet-shaped magnetite crystals in highly organized parallel chains within which the magnetosomes were oriented in the same direction. This is the first report of MMPs from Asia and demonstrates the ubiquitous distribution of MMPs.

Steady State Analysis of Towed Marine Cables

Efficient numerical schemes were presented for the steady state solutions of towed marine cables. For most of towed systems,the steady state problem can be resolved into two-point boundary-value problem,or initial value problem in some special cases where the initial values are available directly.A new technique was proposed and attempted to solve the two-point boundary-value problem rather than the conventional shooting method due to its algorithm complexity and low efficiency.First,the boundary conditions are transformed into a set of nonlinear governing equations about the initial values,then bisection method is employed to solve these nonlinear equations with the aid of 4th order Runge-Kutta method.In common sense,non-uniform (sheared) current is assumed,which varies in magnitude and direction with depth.The schemes are validated through the DE Zoysa's example,then several numerical examples are also presented to illustrate the numerical schemes.

Dynamic Response Analysis of Towed Cable During Deployment/Retrieval

A numerical approach was developed to analyze the transient behavior of towed cable during ac- tively controlled deployment/retrieval (DR).The cable motion is described by the lumped parameter method, its corresponding boundary conditions are presented.In view of its varying length during DR,two auxiliary arguments are introduced to describe its continuous varying length and discrete number of nodes(equations), the length is determined by the pay out(or reel-in) rate,which is then used to determine the node number by a logic relation.For the discrete mathematical model of towed cable,an algorithm was developed to deal with the discrete governing equations.The simulation results indicate that the cable experiences more com- plex motions due to its varying length,and tension fluctuates seriously in the startup and ending stage of deployment/retrieval.The effect of towing ship's motion in waves on cable during deployment/retrieval is also considered via numerical simulation.

Motion Performance and Mooring System of a Floating Offshore Wind Turbine

The development of offshore wind farms was originally carried out in shallow water areas with fixed （seabed mounted） structures. However, countries with limited shallow water areas require innovative floating platforms to deploy wind turbines offshore in order to harness wind energy to generate electricity in deep seas. The performances of motion and mooring system dynamics are vital to designing a cost effective and durable floating platform. This paper describes a numerical model to simulate dynamic behavior of a new semi-submersible type floating offshore wind turbine （FOWT） system. The wind turbine was modeled as a wind block with a certain thrust coefficient, and the hydrodynamics and mooting system dynamics of the platform were calculated by SESAM soRware. The effect of change in environmental conditions on the dynamic response of the system under wave and wind loading was examined. The results indicate that the semi-submersible concept has excellent performance and SESAM could be an effective tool for floating wind turbine design and analysis.