期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
锌空电池气体扩散电极浸液量对放电性能的影响 被引量:2
1
作者 葛浩森 李清宇 +1 位作者 王乾 徐献芝 《实验力学》 CSCD 北大核心 2014年第3期353-360,共8页
锌空电池气体扩散电极在存放和放电过程中,电解液会在毛细力的作用下不断浸入电极。电解液在气体扩散电极中的浸入量与分布情况决定了气体扩散电极中的化学反应活化区,从而影响放电性能。通过实验测量了气体扩散电极开始浸液的4天内... 锌空电池气体扩散电极在存放和放电过程中,电解液会在毛细力的作用下不断浸入电极。电解液在气体扩散电极中的浸入量与分布情况决定了气体扩散电极中的化学反应活化区,从而影响放电性能。通过实验测量了气体扩散电极开始浸液的4天内浸液量与放电性能的关系,并借助拓扑网络数值模拟电解液浸入多孔介质的过程帮助理解该实验现象。结果表明,随着放电过程的进行,浸液量和分布情况不断变化;气体扩散电极放电性能变化主要分为3个阶段:浸液饱和度为39.4%时放电性能最佳;浸液开始2~24小时进行迅速,浸液饱和度达到81%,放电性能小幅下降;24小时之后浸液增速大幅减缓,放电功率随浸液量增加大幅下降。 展开更多
关键词 气体扩散电极 锌空电池 浸液量 放电性能 数值模拟 拓扑网络
原文传递
Effects of Vermicompost Leach Liquor on Yield and Quality of Wheat 被引量:3
2
作者 李国生 华鹤良 +1 位作者 孔佑兵 田银芳 《Agricultural Science & Technology》 CAS 2015年第12期2703-2706,共4页
Medium gluten wheat cultivar Yangmai 21 was sprayed with vermicompost leach liquor after blooming stage to investigate the effects of verrnicompost leach liquor on grain number, yield and quality of wheat. According t... Medium gluten wheat cultivar Yangmai 21 was sprayed with vermicompost leach liquor after blooming stage to investigate the effects of verrnicompost leach liquor on grain number, yield and quality of wheat. According to the results, vermi- compost leach liquor reduced average grain number by 2.1%, significantly increased 1 000-grain weight by 15.2%, enhanced grain weight and grain yield by 6.4% and 4.3%, improved grain starch content, protein content and wet gluten content by 1.5%, 1.4% and 2.3%, respectively, and declined moisture content by 12.3%. Apply- ing vermicompost leach liquor after blooming stage is an effective method to im- prove varietal characteristics, grain weight, yield and quality of wheat. 展开更多
关键词 WHEAT Vermicompost leach liquor YIELD Quality
下载PDF
Separation of rhenium from electric-oxidation leaching solution of molybdenite 被引量:2
3
作者 CAO Zhan-fang ZHONG Hong +3 位作者 JIANG Tao LIU Guang-yi WANG Shuai XIA Liu-yin 《Journal of Central South University》 SCIE EI CAS 2013年第8期2103-2108,共6页
The separation of rhenium from molybdenum in aqueous solution has always been a problem in hydrometallurgy. The separation of rhenium from the electro-oxidation leachate of molybdenite and its mechanism were investiga... The separation of rhenium from molybdenum in aqueous solution has always been a problem in hydrometallurgy. The separation of rhenium from the electro-oxidation leachate of molybdenite and its mechanism were investigated. The results show that pH of the leachate significantly affects adsorption rate compared with other experimental parameters. When temperature is 30℃, pH=8, and adsorbing time is 1 h, adsorption rates of rhenium and molybdenum are 93.46% and 3.57%, respectively, and separation factor of D301 resin for rhenium and molybdenum is 169.56. In addition, the separation factor is higher when the initial molybdenum concentration in model solution is increased. The saturated adsorption capacity of D301 resin for molybdenum and rhenium calculated based on simulated results are 4.263 3 mmol/g and 4.235 5 mmol/g, respectively. D301 resin is an effective separation material of rhenium from electric-oxidation leachate of molybdenite. The adsorption kinetics results also show that the adsorption of rhenium is easier than that of molybdenum, and the adsorption process of D301 for rhenium and molybdenum may be controlled by liquid film diffusion. 展开更多
关键词 RHENIUM MOLYBDENUM SEPARATION RESIN MOLYBDENITE
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部