SiC_(p)/AZ91 composites were prepared by vacuum pressure infiltration.The microstructure,mechanical properties and wear resistance of composite were studied.Results indicated that SiC particles were uniformly distribu...SiC_(p)/AZ91 composites were prepared by vacuum pressure infiltration.The microstructure,mechanical properties and wear resistance of composite were studied.Results indicated that SiC particles were uniformly distributed in the metal matrix and had a good interface bonding with the metal matrix.Mg_(17)Al_(12) preferably precipitated near the SiC particles,and high-density dislocations were induced by the mismatch of the coefficient of thermal expansion(CTE)between the SiC particle and the AZ91 matrix,thereby accelerating the aging precipitation of the matrix.Compared with AZ91 alloy,the addition of SiC particles improves the hardness and compressive strength of the composite,which is mainly due to the load transfer strengthening and grain refinement strengthening mechanisms.Furthermore,a stable support surface-protecting matrix formed during the wear process because of the excellent wear resistance of SiC.展开更多
A new method for determining two key parameters(threshold pressure and permeability)for fabricating metal matrix composites was proposed based on the equation-solving method.An infiltration experimental device was dev...A new method for determining two key parameters(threshold pressure and permeability)for fabricating metal matrix composites was proposed based on the equation-solving method.An infiltration experimental device was devised to measure the infiltration behavior precisely with controllable infiltration velocity.Two experiments with alloy Pb-Sn infiltrating into Al2O3 preform were conducted independently under two different pressures so as to get two different infiltration curves.Two sets of coefficients which are functions of threshold pressure and permeability can be obtained through curve fitting method.By solving the two-variable equation set,two unknown variables were determined.It is shown that the determined threshold pressure and permeability are very close to the calculated ones and are also verified by another independent infiltration experiment.The proposed method is also feasible to determine the key infiltration parameters for other metal matrix composite systems.展开更多
基金financial supports from the National Natural Science Foundation of China(Nos.U1810208,51575230)the Science and Technology Development Program of Jilin Province,China(No.20190302059GX)。
文摘SiC_(p)/AZ91 composites were prepared by vacuum pressure infiltration.The microstructure,mechanical properties and wear resistance of composite were studied.Results indicated that SiC particles were uniformly distributed in the metal matrix and had a good interface bonding with the metal matrix.Mg_(17)Al_(12) preferably precipitated near the SiC particles,and high-density dislocations were induced by the mismatch of the coefficient of thermal expansion(CTE)between the SiC particle and the AZ91 matrix,thereby accelerating the aging precipitation of the matrix.Compared with AZ91 alloy,the addition of SiC particles improves the hardness and compressive strength of the composite,which is mainly due to the load transfer strengthening and grain refinement strengthening mechanisms.Furthermore,a stable support surface-protecting matrix formed during the wear process because of the excellent wear resistance of SiC.
基金Project(51575447) supported by the National Natural Science Foundation of ChinaProject supported by Top University around World Visiting Plan for Young Teacher’s Cultivating in NWPU,China
文摘A new method for determining two key parameters(threshold pressure and permeability)for fabricating metal matrix composites was proposed based on the equation-solving method.An infiltration experimental device was devised to measure the infiltration behavior precisely with controllable infiltration velocity.Two experiments with alloy Pb-Sn infiltrating into Al2O3 preform were conducted independently under two different pressures so as to get two different infiltration curves.Two sets of coefficients which are functions of threshold pressure and permeability can be obtained through curve fitting method.By solving the two-variable equation set,two unknown variables were determined.It is shown that the determined threshold pressure and permeability are very close to the calculated ones and are also verified by another independent infiltration experiment.The proposed method is also feasible to determine the key infiltration parameters for other metal matrix composite systems.
