期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
聚苯胺石墨原位聚合导电涂料的研制及其性能 被引量:4
1
作者 钟平 汪世昌 《材料保护》 CAS CSCD 北大核心 2012年第10期26-28,2,共3页
以苯胺为主要原料,过硫酸铵为氧化剂,盐酸为掺杂剂,再掺入石墨粉原位聚合制备聚苯胺石墨微乳液,以环氧树脂作粘结剂制备复合导电涂料,140℃,固化24 h,表征了涂层电导率、硬度、附着力和固化程度等。结果表明:聚苯胺石墨复合材料的电导... 以苯胺为主要原料,过硫酸铵为氧化剂,盐酸为掺杂剂,再掺入石墨粉原位聚合制备聚苯胺石墨微乳液,以环氧树脂作粘结剂制备复合导电涂料,140℃,固化24 h,表征了涂层电导率、硬度、附着力和固化程度等。结果表明:聚苯胺石墨复合材料的电导率与聚苯胺相比有大幅提高,且石墨含量为5%时导电性能最好;环氧树脂的加入能强化聚苯胺石墨导电涂料的硬度和附着力。其组分的最佳配比为:石墨5%,三氟化硼乙胺固化剂14%,环氧树脂与聚苯胺质量比1.0∶2.5。 展开更多
关键词 导电涂料 聚苯胺石墨原位聚合 环氧树脂 涂层固化参数 涂层电导率 影响因素
下载PDF
Surface resistivity of carbonaceous fiber/PTFE antistatic coatings
2
作者 张姗 王成国 +5 位作者 袁华 朱波 于美杰 张丙明 韩荣恒 李永威 《Journal of Central South University》 SCIE EI CAS 2014年第5期1689-1695,共7页
Abstract: PAN (Polyacrylonitrile)-based carbonaceous fibers were prepared at the heat treatment temperature (HTT) range of 650 to 900 ℃. The relationships among HTT, carbon content and volume resistivity of the ... Abstract: PAN (Polyacrylonitrile)-based carbonaceous fibers were prepared at the heat treatment temperature (HTT) range of 650 to 900 ℃. The relationships among HTT, carbon content and volume resistivity of the carbonaceous fibers were investigated. The carbonaceous fibers/PTFE (Polytetrafluoroethylene) antistatic coatings were prepared by the spraying technology and the effects of carbonaceous fibers and pigments on surface resistivity of the coatings were systematically discussed. Micrographs provide insight into the antistatic mechanism of the coating. The results show that carbon content of the carbonaceous fibers increases from 68.8% to 74.8% (mass fraction) and the volume resistivity decreases drastically from 1.94× 10^-3 to 8.27× 10 ^-2.cm. The surface resistivity of the antistatic coating is adjustable between 10^5 and 10^8Ω2 to fit the different antistatic materials. Static is dissipated by a conductive network of short fibers and the tunneling effect between the neighboring fibers and conductive pigments. Conductive pigments make the conductive network more perfect and improve the antistatic ability, but insulating pigments acting as barriers for the formation of conductive channel increases the surface resistivity of the coatings. The influence of pigments on the surface resistivity drops gradually with the decrease of the carbonaceous fibers volume resistivity. 展开更多
关键词 carbonaceous fiber antistatic coatings surface resistivity PIGMENT MECHANISM
下载PDF
Manipulation of gold coated microspheres using electrorotation 被引量:2
3
作者 JIANG HongYuan REN YuKun +2 位作者 HAN XiaoJun TAO Ye LI ShanShan 《Science China(Technological Sciences)》 SCIE EI CAS 2011年第3期643-649,共7页
The electrorotation of microspheres coated with conductive surface is a novel and important technology for label-free biosensors. Using the electroless plating approach, the polystyrene microspheres with 15 μm and 25... The electrorotation of microspheres coated with conductive surface is a novel and important technology for label-free biosensors. Using the electroless plating approach, the polystyrene microspheres with 15 μm and 25 μm in diameters were coated with 50 nm gold layer in thickness. The electrorotation experiments on those gold coated polystyrene microspheres (GCPMs) were carried out. The results showed that they rotated in the opposite direction of the electric field in a low frequency range (100-100 kHz), and the maximum rotation speed was higher than that of uncoated microspheres. Based on the theory of traveling wave electroosmosis(TWEO) and induced charge electroosmosis (ICEO), the electrorotation of GCPMs was quantitively analyzed and confirmed by observing the fluid flow around GCPM. The equations describing the electroration speed of GCPMs were proposed, which are consistent with the experiment results. 展开更多
关键词 ELECTROROTATION gold coated microspheres TWEO ICEO
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部