A non-hydrostatic, Boussinesq, and three-dimensional large eddy simulation(LES) model was used to study the impact of the Earth's rotation on turbulence and the redistribution of energy in turbulence kinetic energ...A non-hydrostatic, Boussinesq, and three-dimensional large eddy simulation(LES) model was used to study the impact of the Earth's rotation on turbulence and the redistribution of energy in turbulence kinetic energy(TKE) budget. A set of numerical simulations was conducted,(1) with and without rotation,(2) at different latitudes(10°N, 30°N, 45°N, 60°N, and 80°N),(3) with wave breaking and with Langmuir circulation, and(4) under different wind speeds(5, 10, 20, and 30 m/s). The results show that eddy viscosity decreases when rotation is included, indicating that rotation weakens the turbulence strength. The TKE budget become tight with rotation and the effects of rotation grow with latitude. However, rotation become less important under Langmuir circulation since the transport term is strong in the vertical direction. Finally, simulations were conducted based on field data from the Boundary Layer and Air-Sea Transfer Low Wind(CBLAST-Low) experiment. The results, although more complex, are consistent with the results obtained from earlier simulations using ideal numerical conditions.展开更多
A turbocharger compressor working in commercial vehicles, especially in some passenger cars, often works together with some pipes with complicated geometry as an air intake system, due to limit of available space in i...A turbocharger compressor working in commercial vehicles, especially in some passenger cars, often works together with some pipes with complicated geometry as an air intake system, due to limit of available space in internal combustion engine compartments. These pipes may generate various distortions of physical parameters of the air at the inlet of the compressor and therefore the compressor aerodynamic performance deteriorates. Sometimes, the turbocharging engine fails to work at some operation points. This paper investigates the effects of various swirl distortions induced by different bending-torsional intake ducts on the aerodynamic performance of a turbocharger compressor by both 3D numerical simulations and experimental measurements. It was found that at the outlet of the pipes the different inlet ducts can generate different swirl distortions, twin vortices and bulk-like vortices with different rotating directions. Among them, the bulk-like vortices not only affect seriously the pressure distribution in the impeller domain, but also significantly deteriorate the compressor performance, especially at high flow rate region. And the rotating direction of the bulk-like vortices is also closely associated with the efficiency penalty. Besides the efficiency, the transient flow rate through a single impeller channel, or the asymmetric mass flow crossing the whole impeller, can be influenced by two disturbances. One is from the upstream bending-torsional ducts; other one is from the downstream volute.展开更多
基金Supported by the National Natural Science Foundation of China(Nos.41206015,41106019)the National Basic Research Program of China(973 Program)(Nos.2011CB403501,2012CB417402)the Fund for Creative Research Groups by NSFC(No.41121064)
文摘A non-hydrostatic, Boussinesq, and three-dimensional large eddy simulation(LES) model was used to study the impact of the Earth's rotation on turbulence and the redistribution of energy in turbulence kinetic energy(TKE) budget. A set of numerical simulations was conducted,(1) with and without rotation,(2) at different latitudes(10°N, 30°N, 45°N, 60°N, and 80°N),(3) with wave breaking and with Langmuir circulation, and(4) under different wind speeds(5, 10, 20, and 30 m/s). The results show that eddy viscosity decreases when rotation is included, indicating that rotation weakens the turbulence strength. The TKE budget become tight with rotation and the effects of rotation grow with latitude. However, rotation become less important under Langmuir circulation since the transport term is strong in the vertical direction. Finally, simulations were conducted based on field data from the Boundary Layer and Air-Sea Transfer Low Wind(CBLAST-Low) experiment. The results, although more complex, are consistent with the results obtained from earlier simulations using ideal numerical conditions.
基金sponsored by the Key Projects of Hebei Provincial Department of Education(No.ZD2016095)the Program of Science and Technology Research and Development of Handan(1621212047-2)
文摘A turbocharger compressor working in commercial vehicles, especially in some passenger cars, often works together with some pipes with complicated geometry as an air intake system, due to limit of available space in internal combustion engine compartments. These pipes may generate various distortions of physical parameters of the air at the inlet of the compressor and therefore the compressor aerodynamic performance deteriorates. Sometimes, the turbocharging engine fails to work at some operation points. This paper investigates the effects of various swirl distortions induced by different bending-torsional intake ducts on the aerodynamic performance of a turbocharger compressor by both 3D numerical simulations and experimental measurements. It was found that at the outlet of the pipes the different inlet ducts can generate different swirl distortions, twin vortices and bulk-like vortices with different rotating directions. Among them, the bulk-like vortices not only affect seriously the pressure distribution in the impeller domain, but also significantly deteriorate the compressor performance, especially at high flow rate region. And the rotating direction of the bulk-like vortices is also closely associated with the efficiency penalty. Besides the efficiency, the transient flow rate through a single impeller channel, or the asymmetric mass flow crossing the whole impeller, can be influenced by two disturbances. One is from the upstream bending-torsional ducts; other one is from the downstream volute.
