The paper presents an experimental study on the heat transfer and flow friction characteristics in a solar air heater channel fitted with delta-winglet type vortex generators （DWs）. The experiments are conducted by ...The paper presents an experimental study on the heat transfer and flow friction characteristics in a solar air heater channel fitted with delta-winglet type vortex generators （DWs）. The experiments are conducted by varying the airflow rate for Reynolds number in the range of 5000 to 24000 in the test section with a uniform heat-flux applied on the upper channel wall. Firstly, the DW pairs are mounted only at the entrance of the lower wall of the test channel （called DW-E） to create multiple vortex flows at the entry. The effect of two transverse pitches （Re= Pt/H= 1 and 2） at three attack angles （a= 30°, 45° and 60°） of the DW-E with its relative height, b/H= 0.5 （half height of channel） is examined. Secondly, the 30° DWs with three different relative heights （blH = 0.3, 0.4 and 0.5） are placed on the upper wall only （absorber plate, called DW-A） of the test channel. The experimental result reveals that in the first case, the 60° DW-E at Rp = 1 provides the highest heat transfer and friction factor while the 30° DW-E at Rp = 1 performs overall better than the others. In the second case, the 30° DW-A at b/H= 0.5 yields the highest heat transfer and friction factor but the best thermal performance is found at b/H = 0.4.展开更多
文摘The paper presents an experimental study on the heat transfer and flow friction characteristics in a solar air heater channel fitted with delta-winglet type vortex generators （DWs）. The experiments are conducted by varying the airflow rate for Reynolds number in the range of 5000 to 24000 in the test section with a uniform heat-flux applied on the upper channel wall. Firstly, the DW pairs are mounted only at the entrance of the lower wall of the test channel （called DW-E） to create multiple vortex flows at the entry. The effect of two transverse pitches （Re= Pt/H= 1 and 2） at three attack angles （a= 30°, 45° and 60°） of the DW-E with its relative height, b/H= 0.5 （half height of channel） is examined. Secondly, the 30° DWs with three different relative heights （blH = 0.3, 0.4 and 0.5） are placed on the upper wall only （absorber plate, called DW-A） of the test channel. The experimental result reveals that in the first case, the 60° DW-E at Rp = 1 provides the highest heat transfer and friction factor while the 30° DW-E at Rp = 1 performs overall better than the others. In the second case, the 30° DW-A at b/H= 0.5 yields the highest heat transfer and friction factor but the best thermal performance is found at b/H = 0.4.
