The aim of this work is to investigate the flow instabilities in a baffled, stirred tank generated by a single Rushton turbine by means of large eddy simulation （LES）. The sliding mesh method was used for the coupli...The aim of this work is to investigate the flow instabilities in a baffled, stirred tank generated by a single Rushton turbine by means of large eddy simulation （LES）. The sliding mesh method was used for the coupling between the rotating and the stationary frame of references. The calculations were carried out on the ＂Shengcao-21C＂ supercomputer using a computational fluid dynamics （CFD） code CFX5. The flow fields predicted by the LES simulation and the simulation using standard κ-ε model were compared to the results from particle image velocimetry （PIV） measurements. It is shown that the CFD simulations using the LES approach and the standard κ-ε model agree well with the PIV measurements. Fluctuations of the radial and axial velocity are predicted at different frequencies by the LES simulation. Velocity fluctuations of high frequencies are seen in the impeller region, while low frequencies velocity fluctuations are observed in the bulk flow. A low frequency velocity fluctuation with a nondimensional frequency of 0.027Hz is predicted by the LES simulation, which agrees with experimental investigations in the literature. Flow circulation patterns predicted by the LES simulation are asymmetric, stochastic and complex, spanning a large portion of the tanks and varying with time, while circulation patterns calculated by the simulation using the standard κ-ε model are symmetric. The results of the present work give better understanding to the flow instabilities in the mechanically agitated tank. However, further analysis of the LES calculated velocity series by means of fast Fourier transform （FFT） and/or spectra analysis are recommended in future work in order to gain more knowledge of the complicated flow phenomena.展开更多
Towards the objective of improving the gas dispersion performance, the dislocated-blade Rushton impeller was applied to the gas-liquid mixing in a baffled stirred vessel. The flow field, gas hold-up, dissolved oxygen,...Towards the objective of improving the gas dispersion performance, the dislocated-blade Rushton impeller was applied to the gas-liquid mixing in a baffled stirred vessel. The flow field, gas hold-up, dissolved oxygen, power consumption before and after gassing were studied using the computational fluid dynamics （CFD） technique. Dispersion of gas in the liquid was modelled using the Eulerian-Eulerian approach along with the dispersed k-e turbulent model. Rotation of the impeller was simulated with the multiple reference frame method. A modified drag coefficient which includes the effect of turbulence was used to account for the momentum exchange. The predictions were compared with their counterparts of the standard Rushton impeller and were validated with the experimental results. It is concluded that the dislocated-blade Rushton impeller is superior to the standard Rushton impeller in the gas-liquid mixing operation, and the findings obtained here lay the basis of its application in process industries.展开更多
文摘The aim of this work is to investigate the flow instabilities in a baffled, stirred tank generated by a single Rushton turbine by means of large eddy simulation （LES）. The sliding mesh method was used for the coupling between the rotating and the stationary frame of references. The calculations were carried out on the ＂Shengcao-21C＂ supercomputer using a computational fluid dynamics （CFD） code CFX5. The flow fields predicted by the LES simulation and the simulation using standard κ-ε model were compared to the results from particle image velocimetry （PIV） measurements. It is shown that the CFD simulations using the LES approach and the standard κ-ε model agree well with the PIV measurements. Fluctuations of the radial and axial velocity are predicted at different frequencies by the LES simulation. Velocity fluctuations of high frequencies are seen in the impeller region, while low frequencies velocity fluctuations are observed in the bulk flow. A low frequency velocity fluctuation with a nondimensional frequency of 0.027Hz is predicted by the LES simulation, which agrees with experimental investigations in the literature. Flow circulation patterns predicted by the LES simulation are asymmetric, stochastic and complex, spanning a large portion of the tanks and varying with time, while circulation patterns calculated by the simulation using the standard κ-ε model are symmetric. The results of the present work give better understanding to the flow instabilities in the mechanically agitated tank. However, further analysis of the LES calculated velocity series by means of fast Fourier transform （FFT） and/or spectra analysis are recommended in future work in order to gain more knowledge of the complicated flow phenomena.
基金Supported by the National Natural Science Foundation of China(21306105)
文摘Towards the objective of improving the gas dispersion performance, the dislocated-blade Rushton impeller was applied to the gas-liquid mixing in a baffled stirred vessel. The flow field, gas hold-up, dissolved oxygen, power consumption before and after gassing were studied using the computational fluid dynamics （CFD） technique. Dispersion of gas in the liquid was modelled using the Eulerian-Eulerian approach along with the dispersed k-e turbulent model. Rotation of the impeller was simulated with the multiple reference frame method. A modified drag coefficient which includes the effect of turbulence was used to account for the momentum exchange. The predictions were compared with their counterparts of the standard Rushton impeller and were validated with the experimental results. It is concluded that the dislocated-blade Rushton impeller is superior to the standard Rushton impeller in the gas-liquid mixing operation, and the findings obtained here lay the basis of its application in process industries.
