In this article, a theoretical model for predicting the equilibrium morphology of gas–liquid Janus droplets was built. Based on this model, the effects of bubble radius and volume ratio on morphology change was syste...In this article, a theoretical model for predicting the equilibrium morphology of gas–liquid Janus droplets was built. Based on this model, the effects of bubble radius and volume ratio on morphology change was systematically studied. The increase of bubble radius causes the two parts(bubble and oil drop) in Janus droplets tend to merge while the impact of volume ratio is complicated. When volume ratio increases, these two parts firstly tend to merge, then gradually separate. The accuracy of this model was verified by experimental results.展开更多
To clarify the countercurrent flow in a PWR hot leg under reflux condensation, numerical simulations of countercurrent air-water flow for a 1/15th scale model of the PWR hot leg were conducted using the two-fluid mode...To clarify the countercurrent flow in a PWR hot leg under reflux condensation, numerical simulations of countercurrent air-water flow for a 1/15th scale model of the PWR hot leg were conducted using the two-fluid model implemented in CFD software. In this paper, the effect of expansion of the inclined pipe, which is the actual plant geometry, was evaluated. When increasing the air velocity, CCFL characteristics and the mechanism of flow pattern transition had significant differences between the case with and without expansion of the inclined pipe. CCFL characteristics were mitigated in the case with expansion. The effect of computational grid size was also discussed. When the supplied water velocity was small, the predicted flow pattern transition point agreed well with the measured data by increasing the number of cells. On the other hand, when the air velocity was decreasing, there were no significant differences in each case.展开更多
基金Supported by the National Natural Science Foundation of China(21476121,21322604)Beijing Natural Science Foundation(2162020)a Foundation for Tsinghua Independent Research Projects(2014z21026)
文摘In this article, a theoretical model for predicting the equilibrium morphology of gas–liquid Janus droplets was built. Based on this model, the effects of bubble radius and volume ratio on morphology change was systematically studied. The increase of bubble radius causes the two parts(bubble and oil drop) in Janus droplets tend to merge while the impact of volume ratio is complicated. When volume ratio increases, these two parts firstly tend to merge, then gradually separate. The accuracy of this model was verified by experimental results.
文摘To clarify the countercurrent flow in a PWR hot leg under reflux condensation, numerical simulations of countercurrent air-water flow for a 1/15th scale model of the PWR hot leg were conducted using the two-fluid model implemented in CFD software. In this paper, the effect of expansion of the inclined pipe, which is the actual plant geometry, was evaluated. When increasing the air velocity, CCFL characteristics and the mechanism of flow pattern transition had significant differences between the case with and without expansion of the inclined pipe. CCFL characteristics were mitigated in the case with expansion. The effect of computational grid size was also discussed. When the supplied water velocity was small, the predicted flow pattern transition point agreed well with the measured data by increasing the number of cells. On the other hand, when the air velocity was decreasing, there were no significant differences in each case.
