Procedures of preparation of numerical analysis,consisting in a simulation of cooperation of three different media: steel,liquid and gas undergoes dynamic load were discussed.Modelling of the initial static load of th...Procedures of preparation of numerical analysis,consisting in a simulation of cooperation of three different media: steel,liquid and gas undergoes dynamic load were discussed.Modelling of the initial static load of the mechanical system was presented.By using the MSC.Software products the following exemplary computer simulations were made: dynamic load impact on the hydraulic leg as well as effectiveness of the hydraulic leg protection against overload with help of gas accumulator.展开更多
Based on the working principle and the damping characteristic of hydraulic shock absorber, a fluid structure interaction method was presented, which was used to analyze the microcosmic and high-frequency processing me...Based on the working principle and the damping characteristic of hydraulic shock absorber, a fluid structure interaction method was presented, which was used to analyze the microcosmic and high-frequency processing mechanism of fluid structure interaction between circulation valve and liquid of hydraulic shock absorber. The fluid mesh distortion was controlled by the CEL language, and the fluid struc^tre interaction mathematical model was established. The finite element model was established by ANSYS CFX software and was analyzed by dynamic mesh technique. The local sensitive computational area was meshed by prismatic grid, which could reduce the negative volume problem during the simulation. The circulation valve and liquid of hydraulic shock absorber were simulated and analyzed under the condition of sinusoidal inlet velocity loads. Flow characteristic and dynamics characteristic were obtained. The pressure distribution and the displacement of circulation value were obtained, and the acceleration curve of circulation valve was simulated and analyzed. The conformity of the final simulation results with the experimental datum indicates that this method is accurate and reliable to analyze the dynamics characteristic between circulation valve and liquid of hydraulic shock absorber, which can provide a theoretical foundation for optimizing hydraulic shock absorber in the future.展开更多
In a severe accident of a light water reactor, ablation of the RPV （reactor pressure vessel） lower head by corium is a key phenomenon, which affects progression of the accident. The MPS （moving particle semi-impli...In a severe accident of a light water reactor, ablation of the RPV （reactor pressure vessel） lower head by corium is a key phenomenon, which affects progression of the accident. The MPS （moving particle semi-implicit） method is one of particle methods that calculate behavior of incompressible fluid by semi-implicit method. In preceding studies, the MPS method has been extensively studied and developed for simulations of different phenomena involved in severe accident of nuclear reactors. This paper aims to investigate whether the MPS method is capable of analyzing the lower head ablation phenomenon. The small-scale experiment carried out at CRIEPI （Central Research Institute of Electric Power Industry） using Pb-Bi vessel and silicone oil was analyzed for the validation of the MPS method. The MPS analysis well reproduced the experimental phenomena qualitatively. However, with respect to some quantitative results, more investigation such as influence of the calculation particle size is necessary.展开更多
When a liquid undergoes sudden reduction in the surrounding pressure below its saturation pressure, the liquid then enters in a metastable state. In order to regain equilibrium, part of the liquid evaporates quickly i...When a liquid undergoes sudden reduction in the surrounding pressure below its saturation pressure, the liquid then enters in a metastable state. In order to regain equilibrium, part of the liquid evaporates quickly in a phenomenon called ＂flash evaporation＂, and the excess sensible heat contained in the liquid is converted into latent heat of vaporization. Therefore, temperatures of both the liquid and the generated vapor decline to the saturation temperature for the reduced pressure. As the heat and mass transfer occur in direct contact between the liquid and its own vapors, the process involves a very high heat transfer rate which makes it suitable for exchanging heat between sources of relatively small temperature difference. Moreover, dispensability of the heat exchange surfaces in this process is a considerable advantage as these surfaces constitute major part of the total system expenses in addition to the associated maintenance problems, especially when dealing with corrosive fluids such like seawater in the thermal desalination processes and in the OTEC （ocean thermal energy conversion） systems. This paper reports on the heat flux variation profiles during the flash evaporation of superheated water jets at various flow conditions. Heat flax was found to grow with time attaining a peak value before it starts to decrease monotonically.展开更多
文摘Procedures of preparation of numerical analysis,consisting in a simulation of cooperation of three different media: steel,liquid and gas undergoes dynamic load were discussed.Modelling of the initial static load of the mechanical system was presented.By using the MSC.Software products the following exemplary computer simulations were made: dynamic load impact on the hydraulic leg as well as effectiveness of the hydraulic leg protection against overload with help of gas accumulator.
基金Project(51275542) supported by the National Natural Science Foundation of Chinaproject(CDJXS12110010) supported by the Fundamental Research Funds for the Central Universities of China
文摘Based on the working principle and the damping characteristic of hydraulic shock absorber, a fluid structure interaction method was presented, which was used to analyze the microcosmic and high-frequency processing mechanism of fluid structure interaction between circulation valve and liquid of hydraulic shock absorber. The fluid mesh distortion was controlled by the CEL language, and the fluid struc^tre interaction mathematical model was established. The finite element model was established by ANSYS CFX software and was analyzed by dynamic mesh technique. The local sensitive computational area was meshed by prismatic grid, which could reduce the negative volume problem during the simulation. The circulation valve and liquid of hydraulic shock absorber were simulated and analyzed under the condition of sinusoidal inlet velocity loads. Flow characteristic and dynamics characteristic were obtained. The pressure distribution and the displacement of circulation value were obtained, and the acceleration curve of circulation valve was simulated and analyzed. The conformity of the final simulation results with the experimental datum indicates that this method is accurate and reliable to analyze the dynamics characteristic between circulation valve and liquid of hydraulic shock absorber, which can provide a theoretical foundation for optimizing hydraulic shock absorber in the future.
文摘In a severe accident of a light water reactor, ablation of the RPV （reactor pressure vessel） lower head by corium is a key phenomenon, which affects progression of the accident. The MPS （moving particle semi-implicit） method is one of particle methods that calculate behavior of incompressible fluid by semi-implicit method. In preceding studies, the MPS method has been extensively studied and developed for simulations of different phenomena involved in severe accident of nuclear reactors. This paper aims to investigate whether the MPS method is capable of analyzing the lower head ablation phenomenon. The small-scale experiment carried out at CRIEPI （Central Research Institute of Electric Power Industry） using Pb-Bi vessel and silicone oil was analyzed for the validation of the MPS method. The MPS analysis well reproduced the experimental phenomena qualitatively. However, with respect to some quantitative results, more investigation such as influence of the calculation particle size is necessary.
文摘When a liquid undergoes sudden reduction in the surrounding pressure below its saturation pressure, the liquid then enters in a metastable state. In order to regain equilibrium, part of the liquid evaporates quickly in a phenomenon called ＂flash evaporation＂, and the excess sensible heat contained in the liquid is converted into latent heat of vaporization. Therefore, temperatures of both the liquid and the generated vapor decline to the saturation temperature for the reduced pressure. As the heat and mass transfer occur in direct contact between the liquid and its own vapors, the process involves a very high heat transfer rate which makes it suitable for exchanging heat between sources of relatively small temperature difference. Moreover, dispensability of the heat exchange surfaces in this process is a considerable advantage as these surfaces constitute major part of the total system expenses in addition to the associated maintenance problems, especially when dealing with corrosive fluids such like seawater in the thermal desalination processes and in the OTEC （ocean thermal energy conversion） systems. This paper reports on the heat flux variation profiles during the flash evaporation of superheated water jets at various flow conditions. Heat flax was found to grow with time attaining a peak value before it starts to decrease monotonically.
