期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
复兴地区高含黏土页岩凝析气藏渗吸排驱及液体渗流特征研究
1
作者 乔润伟 张士诚 +2 位作者 李凤霞 王飞 李宁 《石油钻探技术》 CAS CSCD 北大核心 2024年第1期96-106,共11页
复兴地区凉高山组为高含黏土页岩凝析气藏,体积压裂改造后闷井和返排期间易出现反凝析和液锁现象,影响开采效果。为准确了解高含黏土页岩凝析气藏的渗吸排驱和液体渗流特征,优化闷井转排驱时机,选取储层岩心,开展了气水渗吸排驱试验和... 复兴地区凉高山组为高含黏土页岩凝析气藏,体积压裂改造后闷井和返排期间易出现反凝析和液锁现象,影响开采效果。为准确了解高含黏土页岩凝析气藏的渗吸排驱和液体渗流特征,优化闷井转排驱时机,选取储层岩心,开展了气水渗吸排驱试验和三相渗吸排驱试验,采用核磁共振、恒压驱替相结合的方式,量化了渗吸排驱过程中压裂液的水锁伤害特征及凝析油的可流动特征;建立了液锁伤害表征方法,并模拟了矿场尺度闷井过程中的水锁特征。研究结果表明:该页岩储层压裂渗吸阶段岩心的渗吸采收率在50.22%~57.14%;渗吸液矿化度越低,返排率越低,水锁伤害率越高;油锁伤害率低于水锁伤害率;存在束缚水时,凝析油的临界可流动饱和度约可降低20%;若以闷井后解除近裂缝水锁伤害为目标,闷井时间以20~30 d为宜。研究结果为复兴地区高含黏土页岩凝析气藏高效开发提供了理论依据。 展开更多
关键词 黏土 页岩 凝析气藏 渗吸 压裂液 液体渗流特征 闷井时间 复兴地区
下载PDF
松散破碎介质中液体饱和渗流规律研究 被引量:7
2
作者 丁德馨 李广悦 +2 位作者 徐文平 张志军 饶龙 《岩土工程学报》 EI CAS CSCD 北大核心 2010年第2期180-184,共5页
原地爆破浸出采场的铀矿堆,是一种由凿岩爆破法构筑而成的矿堆,是一种松散破碎介质,其粒径服从Rosin-Rammler分布,其特征粒径、粒径分布指数和孔隙率随所采用的爆破参数和爆破工艺的不同而不同。为了研究这类铀矿堆的特征粒径、粒径分... 原地爆破浸出采场的铀矿堆,是一种由凿岩爆破法构筑而成的矿堆,是一种松散破碎介质,其粒径服从Rosin-Rammler分布,其特征粒径、粒径分布指数和孔隙率随所采用的爆破参数和爆破工艺的不同而不同。为了研究这类铀矿堆的特征粒径、粒径分布指数和孔隙率对其中液体饱和渗流的影响,根据Rosin-Rammler分布,选配了7组具有不同颗粒级配的试样,采用自制的松散破碎介质液体饱和渗流试验装置,对其中液体饱和渗流的规律进行了试验研究,并利用试验结果,采用自适应神经模糊推理系统(ANFIS),建立了根据特征粒径、粒径分布指数和孔隙率预测渗透率和流态指数的ANFIS模型。结果表明:松散破碎介质中的液体饱和渗流满足非Darcy指数定律;所建立的预测渗透率和流态指数的ANFIS模型,能够给出具有足够精度的预测结果,这为渗透率和流态指数的预测开辟了新的途径。 展开更多
关键词 松散破碎介质 液体饱和渗流 自适应神经模糊推理系统 渗透率 流态指数
下载PDF
用普通碳粉混合剂代替氰盐液体渗碳
3
作者 周正岳 《机械工人(热加工)》 1995年第5期22-22,共1页
某自行车链条专业生产厂家,其链条中的衬圈、滚子及销轴(?)零件,原用液体碳氮共渗。其成分为80%BaCl_2、16%NaCl、4%NaCN,温度为920±5℃。后因氰盐供应紧张及环境污染问题而停用。经试验,现改用普通碳粉混合剂代替氰盐,获得良... 某自行车链条专业生产厂家,其链条中的衬圈、滚子及销轴(?)零件,原用液体碳氮共渗。其成分为80%BaCl_2、16%NaCl、4%NaCN,温度为920±5℃。后因氰盐供应紧张及环境污染问题而停用。经试验,现改用普通碳粉混合剂代替氰盐,获得良好的效果。 展开更多
关键词 自行车链条 液体渗流 碳粉混合剂 氰盐
下载PDF
Effect of Working Temperature on the Resistance Characteristic of a Pleated Stainless Steel Woven Filter
4
作者 李娟 石玉美 汪荣顺 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2009年第6期949-954,共6页
Effect of working temperature on the resistance characteristic including the permeability coefficient and the pressure drop evolution of a pleated stainless steel woven filter with a nominal pore size of 0.5 μm has b... Effect of working temperature on the resistance characteristic including the permeability coefficient and the pressure drop evolution of a pleated stainless steel woven filter with a nominal pore size of 0.5 μm has been studied. The permeability coefficient was obtained based on the pressure drop data and the Darcy's law. In three filtration experiments, pure carbon dioxide at 283 K, nitrogen at 85 K and liquid helium at 18 K are adopted, respectively. It is found that the permeability coefficient decreases at the working temperature due to the cold shrink of the filter element at cryogenic temperature. Then, two kinds of feed slurries, mixture of liquid nitrogen and solid carbon dioxide at 85 K, and mixture of liquid helium and solid nitrogen at 18 K, flow into the filter cell. The solid particles are deposited on the filter surface to form a filter cake and the purified liquid flows through the filter. It is found that the pressure drop evolution shows the same trend on these two temperatures, which can be divided into three stages with high filtration efficiency, indicating the feasibility of the filter for cryogenic application. However, variant cake resistances are obtained, which is resulted from the different interactions between solid particles in the feed slurry at lower working temperature. 展开更多
关键词 resistance characteristic permeability coefficient pressure drop woven filter working temperature
下载PDF
Study on the recovery of ionic liquids from dilute effluent by electrodialysis method and the fouling of cation-exchange membrane 被引量:4
5
作者 BAI Lu WANG XiaoLiang +3 位作者 NIE Yi DONG HaiFeng ZHANG XiangPing ZHANG SuoJiang 《Science China Chemistry》 SCIE EI CAS 2013年第12期1811-1816,共6页
With the wide application of ionic liquids(ILs)in various fields,developing efficient techniques to recover ILs from effluent is an urgent demand for the cost reduction and the environmental protection.In this study,a... With the wide application of ionic liquids(ILs)in various fields,developing efficient techniques to recover ILs from effluent is an urgent demand for the cost reduction and the environmental protection.In this study,an electrodialysis(ED)method was used to recover 1-butyl-3-methylimidazolium chloride([Bmim]Cl)IL from aqueous solution as model effluent.The influences of initial IL concentration and applied voltage on the current efficiency,removal ratio,desalination ratio,membrane flux and specific energy consumption during the ED process were investigated.It was found that the removal ratio and desalination ratio increases with the increasing of initial IL concentration and applied voltage.The current efficiency decreases with the increasing of initial IL concentration and the current efficiency reached the maximum value of 94.3%at 25 V.Besides,as the applied voltage increases,the membrane flux increases and the specific energy consumption decreases.Moreover,the fouling of cation-exchange membrane was also discovered after the desalination of IL.The deposits on the surface or into the membrane which is probably caused by[Bmim]+was characterized by scanning electron microscopy,elemental analysis and Fourier transform infrared. 展开更多
关键词 ionic liquid ELECTRODIALYSIS membrane EFFLUENT RECOVERY
原文传递
INFLUENCE OF SLIP VELOCITY ON BLOOD FLOW THROUGH AN ARTERY WITH PERMEABLE WALL: A THEORETICAL STUDY
6
作者 A. SINHA J. C. MISRA 《International Journal of Biomathematics》 2012年第5期147-166,共20页
A theoretical investigation concerning the influence of slip velocity on the flow of blood through an artery having its wall permeable has been carried out. Here blood is treated as a homogeneous Newtonian fluid. The ... A theoretical investigation concerning the influence of slip velocity on the flow of blood through an artery having its wall permeable has been carried out. Here blood is treated as a homogeneous Newtonian fluid. The flow is characterized by three parameters: /3 the ratio of radius to length of the arterial segment, Re the characteristic Reynolds number associated with the pressure outside the arterial segment and c the filtration coe^cient. The problem has been solved by the use of a perturbation technique, e is considered to be very small, ensuring the validity of the perturbation method. The computed numerical results are presented graphically to depict the variations in velocity, volumetric flow rate, wall shear stress and flow resistance. 展开更多
关键词 Slip velocity permeable artery newtonian fluid.
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部