In this paper,nano-Cu particles with an average size of smaller than 20 nm were dispersed under ultrasonic agitation in emulsions for cold rolling of steel strips.The tribological properties of the cold rolling emulsi...In this paper,nano-Cu particles with an average size of smaller than 20 nm were dispersed under ultrasonic agitation in emulsions for cold rolling of steel strips.The tribological properties of the cold rolling emulsion doped with nano-Cu particles were evaluated by using a four-ball machine,and the worn surfaces of the steel balls were checked by an optical microscope.A JC2000C1 wetting angle tester was also applied to study the variation in the emulsion's wetting performance when nano-Cu particles were incorporated.Furthermore,the lubricity of the emulsion doped with nano-Cu for steel strip cold rolling was evaluated on a four-high rolling mill for comparison with the emulsion without using nano-Cu particles.Test results indicated that nano-Cu particles as the additive used in cold rolling emulsion were able to improve the wetting property,friction-reducing,anti-wear,and extreme pressure performance of the base stock significantly.At the same time,nano-Cu particles also showed good lubricity to the cold-rolled steel strips.Namely,the cold-rolled steel strips under the lubrication of the cold rolling emulsion containing nano-Cu particles had considerably decreased the after-rolling thickness and achieved excellent surface quality as well.Finally,the lubrication mechanism of nano-Cu particles in the emulsion for cold rolling of steel strips was discussed.展开更多
A rapid, sensitive and reproducible high performance liquid chromatography （HPLC） method with post-column fluorescence derivatization has been developed to determine the amount of low-molecular- weight sulfated poly...A rapid, sensitive and reproducible high performance liquid chromatography （HPLC） method with post-column fluorescence derivatization has been developed to determine the amount of low-molecular- weight sulfated polysaccharide （GFS） in vivo. The metabolism of GFS has been shown to fit a two component model following its administration by intravenous injection, and its pharmacokinetic parameters were determined to be as follows： half-time of distribution phase （t1/2α）=11.2±2.93 min, half-time of elimination phase （tl/2α）=98.20±25.78 min, maximum concentration （Cmax）=110.53 gg/mL and peak time （Tmax）=5 min. The pharmacokinetic behavior of GFS was also investigated following intragastric administration. However, the concentration of GFS found in serum was too low for detection, and GFS could only be detected for up to 2 h after intragastric administration （200 mg/kg body weight）. Thus, the bioavailability of GFS was low following intragastric administration because of the metabolism of GFS. In conclusion, HPLC with post-column derivatization could be used for quantitative microanalysis and pharmacokinetic studies to determine the presence of polysaccharides in the serum following intravenous injection.展开更多
基金supported by the National High-Tech Research and Development Program("863"Program) of China (No.2009AA03Z339)Important and Large Sci-Tech of Guangzhou Mechanical Engineering Research Institute Co.,Ltd. (No. 12300022)
文摘In this paper,nano-Cu particles with an average size of smaller than 20 nm were dispersed under ultrasonic agitation in emulsions for cold rolling of steel strips.The tribological properties of the cold rolling emulsion doped with nano-Cu particles were evaluated by using a four-ball machine,and the worn surfaces of the steel balls were checked by an optical microscope.A JC2000C1 wetting angle tester was also applied to study the variation in the emulsion's wetting performance when nano-Cu particles were incorporated.Furthermore,the lubricity of the emulsion doped with nano-Cu for steel strip cold rolling was evaluated on a four-high rolling mill for comparison with the emulsion without using nano-Cu particles.Test results indicated that nano-Cu particles as the additive used in cold rolling emulsion were able to improve the wetting property,friction-reducing,anti-wear,and extreme pressure performance of the base stock significantly.At the same time,nano-Cu particles also showed good lubricity to the cold-rolled steel strips.Namely,the cold-rolled steel strips under the lubrication of the cold rolling emulsion containing nano-Cu particles had considerably decreased the after-rolling thickness and achieved excellent surface quality as well.Finally,the lubrication mechanism of nano-Cu particles in the emulsion for cold rolling of steel strips was discussed.
基金Supported by the National Natural Science Foundation of China(No.41376166)the Ocean Public Welfare Scientific Research Project(Nos.201005024,201405040)+1 种基金the Jiangsu Science and Technology Project(No.BE2012687)the Special Fund for Cooperation between Jilin Province and Chinese Academy of Sciences(No.2013SYHZ0023)
文摘A rapid, sensitive and reproducible high performance liquid chromatography （HPLC） method with post-column fluorescence derivatization has been developed to determine the amount of low-molecular- weight sulfated polysaccharide （GFS） in vivo. The metabolism of GFS has been shown to fit a two component model following its administration by intravenous injection, and its pharmacokinetic parameters were determined to be as follows： half-time of distribution phase （t1/2α）=11.2±2.93 min, half-time of elimination phase （tl/2α）=98.20±25.78 min, maximum concentration （Cmax）=110.53 gg/mL and peak time （Tmax）=5 min. The pharmacokinetic behavior of GFS was also investigated following intragastric administration. However, the concentration of GFS found in serum was too low for detection, and GFS could only be detected for up to 2 h after intragastric administration （200 mg/kg body weight）. Thus, the bioavailability of GFS was low following intragastric administration because of the metabolism of GFS. In conclusion, HPLC with post-column derivatization could be used for quantitative microanalysis and pharmacokinetic studies to determine the presence of polysaccharides in the serum following intravenous injection.
