A surgical manipulator has widely been used for laparoscopic surgery. It has been chosen mainly for the use in supporting human operations and in robot systems like the da Vinci surgical system. These manipulator syst...A surgical manipulator has widely been used for laparoscopic surgery. It has been chosen mainly for the use in supporting human operations and in robot systems like the da Vinci surgical system. These manipulator systems are suitable for careful work, but they have a few problems. One of the problems is that the manipulator is not equipped with haptic sensing functions. Therefore, the operator must know the advanced techniques for visually detecting the physical contact state during surgical operations. These haptic sensing functions thus need to be incorporated into a surgical manipulator. We have developed hydraulic-driven forceps with a micro bearing and a bellows tube that can convey haptic sense to the operator. This system can measure the small forces acting on the tips of the forceps using Pascal＇s principle. A model of the system is provided from the relationship between the internal pressure of the bellows tube and the refraction angles of the forceps. It was confirmed using this model that the developed system makes it possible to estimate both the strength and the direction of the external force applied to the forceps by measuring the internal pressure of the bellows tube. An operator using a three-dimensional haptic device was able to feel the force response during an experiment in which they used the forceps to hold a blood vessel. This report describes the most appropriate method for letting the operator feel the force conveyed by using our system.展开更多
A prototype of hydraulically powered quadruped robot is presented. The aim of the research is to develop a versatile robot platform which could travel fleetly in outdoor terrain with long time of en- durance and high ...A prototype of hydraulically powered quadruped robot is presented. The aim of the research is to develop a versatile robot platform which could travel fleetly in outdoor terrain with long time of en- durance and high load carrying ability. The current version is 1. lm long and 0.48m wide, and weights about 150kg. Each leg has four rotational joints driven by hydraulic cylinders and one pas- sive translational joint with spring. The torso carries the control system and the power system. A no- vel control algorithm is developed based on a Spring-Loaded Inverted Pendulum model and the prin- ciple of joint function separation. The robot can not only cross a 150mm high obstacle in static gait and trot at 2.5km/h and l km/h on the level-ground and 10°sloped-terrain respectively, but also au- tomatically keep balanced under lateral disturbance. In this paper, the mechanical structure and control systems are also discussed. Simulations and experiments are carried out to validate the design and algorithms.展开更多
文摘A surgical manipulator has widely been used for laparoscopic surgery. It has been chosen mainly for the use in supporting human operations and in robot systems like the da Vinci surgical system. These manipulator systems are suitable for careful work, but they have a few problems. One of the problems is that the manipulator is not equipped with haptic sensing functions. Therefore, the operator must know the advanced techniques for visually detecting the physical contact state during surgical operations. These haptic sensing functions thus need to be incorporated into a surgical manipulator. We have developed hydraulic-driven forceps with a micro bearing and a bellows tube that can convey haptic sense to the operator. This system can measure the small forces acting on the tips of the forceps using Pascal＇s principle. A model of the system is provided from the relationship between the internal pressure of the bellows tube and the refraction angles of the forceps. It was confirmed using this model that the developed system makes it possible to estimate both the strength and the direction of the external force applied to the forceps by measuring the internal pressure of the bellows tube. An operator using a three-dimensional haptic device was able to feel the force response during an experiment in which they used the forceps to hold a blood vessel. This report describes the most appropriate method for letting the operator feel the force conveyed by using our system.
基金Supported by the National High Technology Research and Development Programme of China(No.2011AA040701)
文摘A prototype of hydraulically powered quadruped robot is presented. The aim of the research is to develop a versatile robot platform which could travel fleetly in outdoor terrain with long time of en- durance and high load carrying ability. The current version is 1. lm long and 0.48m wide, and weights about 150kg. Each leg has four rotational joints driven by hydraulic cylinders and one pas- sive translational joint with spring. The torso carries the control system and the power system. A no- vel control algorithm is developed based on a Spring-Loaded Inverted Pendulum model and the prin- ciple of joint function separation. The robot can not only cross a 150mm high obstacle in static gait and trot at 2.5km/h and l km/h on the level-ground and 10°sloped-terrain respectively, but also au- tomatically keep balanced under lateral disturbance. In this paper, the mechanical structure and control systems are also discussed. Simulations and experiments are carried out to validate the design and algorithms.
