期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
数字微流控生物芯片的动态重构型功能模块设计 被引量:1
1
作者 王鹤 《制造业自动化》 CSCD 2018年第10期152-156,共5页
在基于功能模块式的数字微流控生物芯片的系统综合设计中,用于液滴操作的功能模块的形状均是长方形,而且模块的形状和位置在操作执行过程中是固定不变的,这在很大程度上限制了一定时间段内液滴并行操作的数量,从而增加了生化检验完成时... 在基于功能模块式的数字微流控生物芯片的系统综合设计中,用于液滴操作的功能模块的形状均是长方形,而且模块的形状和位置在操作执行过程中是固定不变的,这在很大程度上限制了一定时间段内液滴并行操作的数量,从而增加了生化检验完成时间。而最小化生化检验完成时间是确保检验结果完整性的关键措施之一。为实现这一目标,采用动态重构型功能模块的设计方法,使用于完成某个液滴操作的功能模块根据不同时间段内空闲电极的分布及数量适时改变其形状及位置,以实现最大限度的液滴操作并行处理;并提出了一种液滴运动分解及时间计算方法,用来确定任意形状的功能模块执行液滴操作的完成时间。 展开更多
关键词 数字微流控 生物芯片 运动分解 动态重构 功能模块
下载PDF
Velocity and Size of Droplets in Dense Region of Diesel Fuel Spray on Transient Needle Opening Condition
2
作者 Hironobu UEKI Masahiro ISHIDA Daisaku SAKAGUCHI 《Journal of Thermal Science》 SCIE EI CAS CSCD 2005年第2期181-186,共6页
In order to investigate the effect of transient needle opening on early stage of spray behavior, simultaneous measurements of velocity and size of droplet were conducted by a newly developed laser 2-focus velocimeter ... In order to investigate the effect of transient needle opening on early stage of spray behavior, simultaneous measurements of velocity and size of droplet were conducted by a newly developed laser 2-focus velocimeter (L2F). The micro-scale probe of the L2F was consisted of two foci with a distance of 36μm. The tested nozzle had a single hole with a diameter of 0.2 mm. The measurements of injection pressure, needle lift, and crank angle were synchronized with the spray measurement by the L2F at the position 10 mm downstream from the nozzle exit. It has been clearly shown that the velocity and size of droplet increase with needle valve opening and that the probability density distribution of droplet size can be fitted to the Nukiyama-Tanasawa distribution under the transient needle opening condition. 展开更多
关键词 droplet disintegration optical characterization laser 2-focus velocimeter.
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部