A thin layer of TiO2 film was deposited on ITO surface via the liquid phase deposition （LPD） process. The photocurrent and electrochemical impedance spectroscopy （EIS） measurements indicated that the as-prepared L...A thin layer of TiO2 film was deposited on ITO surface via the liquid phase deposition （LPD） process. The photocurrent and electrochemical impedance spectroscopy （EIS） measurements indicated that the as-prepared LPD TiO2/ITO film had an excellent photoelectrochemical performance, which showed a sensitive and rapid response to the UV irradiation. The photogenerated electron-hole pairs could be effectively separated by applying an external bias to the TiO2 film electrode. The LPD TiO2/ITO film was employed to study the photoelectrocatalytic （PEC） degradation of 4-aminoantipyrine. Compared with other techniques, the PEC technique based on such a LPD film electrode had a synergetic effect for 4-aminoantipyrine degradation. When the applied bias potential was＋0.8 V and the supporting electrolyte concentration of Na2SO4 was 0.1 mol/L, the highest degradation efficiency within 120 min could reach 95%for 0.1 mmol/L 4-aminoantipyrine solution at pH 2.0.展开更多
The potentiostatic electrodeposition of Zn-Ni-Mn was carried out in an alkaline solution with the addition of Mn salt.The effects of electrolyte Mn2+concentration and deposition potential on the surface morphology,pha...The potentiostatic electrodeposition of Zn-Ni-Mn was carried out in an alkaline solution with the addition of Mn salt.The effects of electrolyte Mn2+concentration and deposition potential on the surface morphology,phase structure and corrosion behavior of coatings were studied.The results of corrosion polarization showed that the presence of higher Mn content in Zn-Ni-Mn coatings could lead to the formation of a good passive layer with a 7-fold increase in Rp of coating and a significant decrease in the corrosion current density compared to those of Zn-Ni coating.The XRD and the XPS analyses from the surface of Zn-Ni-Mn after corrosion test showed that the passive layer was composed of zinc hydroxide chloride,zinc oxide,zinc hydroxide carbonate,and manganese oxides.展开更多
Ni nanoparticles plating was prepared in reverse microemulsion. The deposition was carried out through the Brownian motion of water pools in the reverse microemulsion and the adsorption of water pools on the electrode...Ni nanoparticles plating was prepared in reverse microemulsion. The deposition was carried out through the Brownian motion of water pools in the reverse microemulsion and the adsorption of water pools on the electrode surface. Effects of electrolytic parameters on the size of Ni particles were studied. The performances of hydrogen evolution and hydrogen storage of the Ni nanoparticles plating electrode were also investigated. The results indicate that the size of Ni nanoparticles decreases with the increase of Ni2+ concentration and the decrease of current density. The electrochemical activity of Ni nanoparticles plating electrode is much higher than that of bulk Ni electrode.展开更多
TiO2/bauxite-tailings （TiO2/BTs） composites were prepared via a chemical liquid deposition method and characterized by X-ray diffractometry （XRD）, scanning electronic microscopy （SEM） and N2 adsorption analysis....TiO2/bauxite-tailings （TiO2/BTs） composites were prepared via a chemical liquid deposition method and characterized by X-ray diffractometry （XRD）, scanning electronic microscopy （SEM） and N2 adsorption analysis. The photocatalytic performance of TiO2/BTs composites was evaluated with UV-Vis spectrophotometer following the changes of phenol concentration under different illumination time. Effects of the calcination temperature, the pH and the cycles on the photocatalytic activity of TiO2/BTs composites were investigated. The composites calcined at 500 and 600 ℃ exhibit the best photocatalytic performance, and the phenol degradation ratios reacting for 40 and 160 rain reach 35% and 78% respectively under the same conditions, higher than those of 29% and 76% of the Degussa P25（TiO2）. The ability of TiO2/BTs500 （BTs500 represents bauxite-tailings calcined at 500 ℃） composites to degrade phenol increases with decreasing pH.展开更多
基金Projects(12JJ3013,11JJ5010,10JJ5002)supported by the Natural Science Foundation of Hunan Province,ChinaProject(2013CL04)supported by the Hunan Provincial Key Laboratory of Materials Protection for Electric Power and Transportation,Changsha University of Science and Technology,ChinaProject(2011RS4069)supported by the Planned Science and Technology Program of Hunan Province,China
文摘A thin layer of TiO2 film was deposited on ITO surface via the liquid phase deposition （LPD） process. The photocurrent and electrochemical impedance spectroscopy （EIS） measurements indicated that the as-prepared LPD TiO2/ITO film had an excellent photoelectrochemical performance, which showed a sensitive and rapid response to the UV irradiation. The photogenerated electron-hole pairs could be effectively separated by applying an external bias to the TiO2 film electrode. The LPD TiO2/ITO film was employed to study the photoelectrocatalytic （PEC） degradation of 4-aminoantipyrine. Compared with other techniques, the PEC technique based on such a LPD film electrode had a synergetic effect for 4-aminoantipyrine degradation. When the applied bias potential was＋0.8 V and the supporting electrolyte concentration of Na2SO4 was 0.1 mol/L, the highest degradation efficiency within 120 min could reach 95%for 0.1 mmol/L 4-aminoantipyrine solution at pH 2.0.
文摘The potentiostatic electrodeposition of Zn-Ni-Mn was carried out in an alkaline solution with the addition of Mn salt.The effects of electrolyte Mn2+concentration and deposition potential on the surface morphology,phase structure and corrosion behavior of coatings were studied.The results of corrosion polarization showed that the presence of higher Mn content in Zn-Ni-Mn coatings could lead to the formation of a good passive layer with a 7-fold increase in Rp of coating and a significant decrease in the corrosion current density compared to those of Zn-Ni coating.The XRD and the XPS analyses from the surface of Zn-Ni-Mn after corrosion test showed that the passive layer was composed of zinc hydroxide chloride,zinc oxide,zinc hydroxide carbonate,and manganese oxides.
基金Projects(20673036,J0830415) supported by the National Natural Science Foundation of ChinaProject(09JJ3025) supported by Hunan Provincial Natural Science Foundation of ChinaProject(09GK3173) supported by the Planned Science and Technology Project of Hunan Province,China
文摘Ni nanoparticles plating was prepared in reverse microemulsion. The deposition was carried out through the Brownian motion of water pools in the reverse microemulsion and the adsorption of water pools on the electrode surface. Effects of electrolytic parameters on the size of Ni particles were studied. The performances of hydrogen evolution and hydrogen storage of the Ni nanoparticles plating electrode were also investigated. The results indicate that the size of Ni nanoparticles decreases with the increase of Ni2+ concentration and the decrease of current density. The electrochemical activity of Ni nanoparticles plating electrode is much higher than that of bulk Ni electrode.
基金Project(2005CB623701) supported by the National Key Basic Research Program of China
文摘TiO2/bauxite-tailings （TiO2/BTs） composites were prepared via a chemical liquid deposition method and characterized by X-ray diffractometry （XRD）, scanning electronic microscopy （SEM） and N2 adsorption analysis. The photocatalytic performance of TiO2/BTs composites was evaluated with UV-Vis spectrophotometer following the changes of phenol concentration under different illumination time. Effects of the calcination temperature, the pH and the cycles on the photocatalytic activity of TiO2/BTs composites were investigated. The composites calcined at 500 and 600 ℃ exhibit the best photocatalytic performance, and the phenol degradation ratios reacting for 40 and 160 rain reach 35% and 78% respectively under the same conditions, higher than those of 29% and 76% of the Degussa P25（TiO2）. The ability of TiO2/BTs500 （BTs500 represents bauxite-tailings calcined at 500 ℃） composites to degrade phenol increases with decreasing pH.
