激光诱导普通玻璃表面局域液相化学沉积铜的研究

利用CO2 激光 (λ =10 .6 μm)作为诱导光源 ,普通玻璃作为衬底 ,研究了影响激光沉积质量和速率的因素 ,探讨了激光诱导液相化学沉积技术的反应机制 ,反应产物及其沉积模型等。采用光学显微镜对其沉积过程和沉积铜的微观形貌进行了观察。结果表明 :激光诱导液相化学沉积技术能沉积出表面平整 ,颗粒大小均匀、规则 ,分布致密的铜镀层 ,且沉积速率比起普通化学镀也要高出几个数量级。

Preparation and characterization of Mo-Cu nanocomposite powders by chemical liquid reduction process

A novel chemical liquid reduction process was employed to prepare nanosized Mo-Cu powders. The precipitates were first obtained by adding ammonium heptamolybdate （（NH4）6Mo7024·4H2O） solution into excess hydrazine hydrate solution, and then mixed the copper chloride solution. The precipitates were subsequently washed, dried, followed by reducing in H2 atmosphere to convert into Mo-Cu composite powders. The composition, morphology and particle size of the Mo-Cu composite powders were characterized by the XRD, SEM and TEM. The effects of the chemical reaction temperature and the magnetic stirring on the morphology of the Mo-Cu powders were also studied. The results show that Mo-Cu powders produced by the chemical liquid reduction process are nearly spherical shape and dispersive distribution state, with particle size ranging from 50 to 100 nm. The chemical reaction temperature and magnetic stirring will change the particle feature of the powders. Because of the Cu3M0209, the reduction process in H2 is the one-stage reduction from the precipitates to the Mo-Cu composite powders.

Effect of Fe content on microstructure and mechanical properties of Cu-Fe-based composite coatings by laser induction hybrid rapid cladding

To select the proper composition and obtain an overall material?microstructure?property relationship for Cu?Fe alloy, theeffect of Fe content on microstructure and properties of Cu?Fe-based composite coatings by laser induction hybrid rapid claddingwas investigated. Microstructure characterization of the composite coatings was tested utilizing SEM, XRD and EDS. Microhardnessmeasurement was executed to evaluate the mechanical properties of the composite coatings. The results show that for low Fe content,the composite coating presents a feature that Fe-rich equiaxed dendrites are embedded in the Cu-rich matrix. With increasing Fecontent, the Fe-rich particles are dispersed in the Cu-rich matrix. With further increasing Fe content, large amounts of Cu-richparticles are homogeneously dispersed in the interdendrite of the Fe-rich matrix. Correspondingly, the average microhardness of thecomposite coatings increases gradually with the increase of Fe content and the microhardness of Cu14.5Fe83Si2C0.5 coating is muchtwice higher than that of the substrate.

Homogeneous and Heterogeneous Performances of Pyridinium Ionic Liquids in the Allylic Oxidation of Ionone-like Dienes

The combination of relatively low-cost ionic liquids, simple copper salt, and terminal oxidant tert-butyl hydroperoxide provided an efficient and environmentally friendly approach to the preparation of ionone-like dienones. Six pyridinium ionic liquids were evaluated in allylic oxidation of α-ionone and β-ionone. The 60%-70% yields of 3-oxo-α-ionone were obtained with 0.02 0.20 mmol of CuCl2·2H2O as catalyst, 3-5 mmol of tert-butyl hydroperoxide as oxidant and 1 g of [Bpy]PF6 as solvent for 4-20 h at 60℃. The facile recovery and recycle of catalyst were also achieved. More significantly, peculiar phase behaviors of [Bpy]PF6 and [Epy]PF6 offered the catalytic system advantages of homogeneous reaction and heterogeneous separation. Scanning electron microscope （SEM） images of [Bpy]PF6 provided evidences for the behaviors. Transmission electron microscope （TEM） micrographs showed copper salt nanoparticles catalyst formed and stabilized in pyridinium ionic liquids.

Correlation between supercooled liquid region and crystallization behavior with alloy composition of La-Al-Cu metallic glasses

Bulk metallic glasses (BMGs) with large supercooled liquid region are promising materials for superplastic forming. In this paper, we demonstrate a microstructure-based strategy to pinpoint the composition with the largest supercooled liquid region in La 86 x Al 14 Cu x (x=16 at%-20 at%) metallic glass system. By monitoring the changes in crystallization behavior of the glassy alloys with composition to search for the alloys exhibiting eutectic crystallization, the glassy alloys with the largest supercooled liquid region in the given alloy system can be found. The metallic glasses with Cu contents of 16 at%-19 at% exhibited two crystallization peaks, and the primary crystallization product was identified to be α-La by means of DSC, XRD and TEM. The increase in Cu content resulted in the decay of the primary crystallization peak and the increase in onset temperature of crystallization, leading to the enlargement of supercooled liquid region. By further suppressing the α-La primary crystallization with increasing Cu content up to 20 at%, the eutectic crystallization of α-La and LaCu 13 through one crystallization reaction occurred upon heating, where the largest supercooled liquid region of 65 K for La 66 Al 14 Cu 20 glassy alloy was located. This study indicats that, in a given glassy alloy system, a larger supercooled liquid region can be achieved by optimizing the alloy compositions to suppress the primary crystallization.