Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using pote...Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using potentiodynamic polarization and scanning electron microscopy （SEM） with energy dispersive spectrometer （EDS）. Results indicate that DCEF decreases the corrosion of PCB-Cu;Cl-ions directionally migrate from the negative pole to the positive pole, and enrich on the surface of the positive pole, which causes serious localized corrosion; dendrites grow on the surface of the negative pole, and the rate and scale of dendrite growth become faster and greater with the increase of external voltage and exposure time, respectively.展开更多
The electrochemical migration（ECM） behavior and mechanism of immersion silver processing circuit board（PCB-ImAg）and hot air solder leveling circuit board（PCB-HASL） under the 0.1 mol/L Na2SO4 absorbed thin liquid...The electrochemical migration（ECM） behavior and mechanism of immersion silver processing circuit board（PCB-ImAg）and hot air solder leveling circuit board（PCB-HASL） under the 0.1 mol/L Na2SO4 absorbed thin liquid films with different thicknesses were investigated using stereo microscopy and scanning electron microscopy（SEM）.Meanwhile,the corrosion tendency and kinetics rule of metal plates after bias application were analyzed with the aid of electrochemical impedance spectroscopy（EIS）and scanning Kelvin probe（SKP）.Results showed that under different humidity conditions,the amount of migrating corrosion products of silver for PCB-ImAg was limited,while on PCB-HASL both copper dendrites and precipitates such as sulfate and metal oxides of copper/tin were found under a high humidity condition（exceeding 85%）.SKP results indicated that the cathode plate of two kinds of PCB materials had a higher corrosion tendency after bias application.An ECM model involving multi-metal reactions was proposed and the differences of ECM behaviors for two kinds of PCB materials were compared.展开更多
A mathematical model was developed to monitor the facilitated transport of germanium(IV) from oxalic acid solutions through a flat sheet supported liquid membrane(FSSLM) containing four trialkylphosphine oxides(Cyanex...A mathematical model was developed to monitor the facilitated transport of germanium(IV) from oxalic acid solutions through a flat sheet supported liquid membrane(FSSLM) containing four trialkylphosphine oxides(Cyanex 923). The FSSLM modeling was based on the extraction constant(Kext) calculated from the liquid-liquid extraction(LLX) modeling. The LLX model presented a reliable calculation of the extraction constant(Kex= 2.057×103 L/mol4). The FSSLM model was solved using Matlab■ software according to extraction constant, Fick’s law, and diffusional principles. The model predicts the overall mass transfer coefficient(Korg) to be 3.84 cm/s. Using this value, diffusion coefficients(Dm) for various Cyanex 923 concentrations of 0.126, 0.252, 0.378, 0.505, 0.631 and 0.757 mol/L are found to be 8.50×10^-4, 4.30×10^-4, 1.87×10^-4, 5.87×10^-5, 2.57×10^-5, 2.09×10^-5 cm2/s, respectively. The results show that the diffusion rate of the current study is approximately more than that of similar FSSLM systems containing Cyanex 923 used to transport various metals. The modeling values are in good agreement with the experimental data, showing the good reliability of the mathematical model.展开更多
A novel d!sphase supplying supported liquid membrane （DSSLM）, containing supplying feed phase andsupplying stripping phase tor transport behavior ot NI（Ⅱ）, have been studied. The supplying supported feed phase in...A novel d!sphase supplying supported liquid membrane （DSSLM）, containing supplying feed phase andsupplying stripping phase tor transport behavior ot NI（Ⅱ）, have been studied. The supplying supported feed phase included feed solution and di（2-ethyhexyl） phosphoric acid （HDEHP） as the carrier in kerosene, and supplying stripping phase included HDEHP as the cartier in kerosene and HC1 as the stripping agent. The effects of volume ratio of membrane solution to feed solution （O/F）, pH, initial concentration of Ni（Ⅱ） and ionic strength in the feedsolution, volume ratio of membrane solution to stripping solution （O/S）, concentration of H2SO4 solution, HDEHP concentration in the supplying stripping phase on transport of Ni（/I）, the advantages of DSSLM compared to the traditional supported liquid membrane （SLM）, the system stability, the reuse of membrane solution and the reten- tion of membrane phase were studied. Experimental results indicated that the optimum transpgrt of Ni（Ⅱ） was oh-tained when H2SO4 concentration was 2.00 mol＇L-＇, HDEHP concentration was 0.120 mol·L-1, and O/S was 4· 1 in the supplying stripping phase, O/F was 1 ： 10 and pH was 5.20 in the supplying feed phase. The ionic strength in supplying feed phase had no obvious effect on transport of Ni（Ⅱ）. When initial Ni（Ⅱ） concentration was 2.00x 10-4 mol/L, the transport percentage of Ni（Ⅱ） was up to 93.1% in 250 min. The kinetic equation was deduced in terms of the law of mass diffusion and the interface chemistry.展开更多
基金Project(50871044)supported by the National Natural Science Foundation of ChinaProject(2012M511207)supported by the Postdoctoral Science Foundation of ChinaProject(10122011)supported by the Science Research Foundation of Wuhan Institute Technology,China
文摘Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using potentiodynamic polarization and scanning electron microscopy （SEM） with energy dispersive spectrometer （EDS）. Results indicate that DCEF decreases the corrosion of PCB-Cu;Cl-ions directionally migrate from the negative pole to the positive pole, and enrich on the surface of the positive pole, which causes serious localized corrosion; dendrites grow on the surface of the negative pole, and the rate and scale of dendrite growth become faster and greater with the increase of external voltage and exposure time, respectively.
基金Project(51271032)supported by the National Natural Science Foundation of China
文摘The electrochemical migration（ECM） behavior and mechanism of immersion silver processing circuit board（PCB-ImAg）and hot air solder leveling circuit board（PCB-HASL） under the 0.1 mol/L Na2SO4 absorbed thin liquid films with different thicknesses were investigated using stereo microscopy and scanning electron microscopy（SEM）.Meanwhile,the corrosion tendency and kinetics rule of metal plates after bias application were analyzed with the aid of electrochemical impedance spectroscopy（EIS）and scanning Kelvin probe（SKP）.Results showed that under different humidity conditions,the amount of migrating corrosion products of silver for PCB-ImAg was limited,while on PCB-HASL both copper dendrites and precipitates such as sulfate and metal oxides of copper/tin were found under a high humidity condition（exceeding 85%）.SKP results indicated that the cathode plate of two kinds of PCB materials had a higher corrosion tendency after bias application.An ECM model involving multi-metal reactions was proposed and the differences of ECM behaviors for two kinds of PCB materials were compared.
文摘A mathematical model was developed to monitor the facilitated transport of germanium(IV) from oxalic acid solutions through a flat sheet supported liquid membrane(FSSLM) containing four trialkylphosphine oxides(Cyanex 923). The FSSLM modeling was based on the extraction constant(Kext) calculated from the liquid-liquid extraction(LLX) modeling. The LLX model presented a reliable calculation of the extraction constant(Kex= 2.057×103 L/mol4). The FSSLM model was solved using Matlab■ software according to extraction constant, Fick’s law, and diffusional principles. The model predicts the overall mass transfer coefficient(Korg) to be 3.84 cm/s. Using this value, diffusion coefficients(Dm) for various Cyanex 923 concentrations of 0.126, 0.252, 0.378, 0.505, 0.631 and 0.757 mol/L are found to be 8.50×10^-4, 4.30×10^-4, 1.87×10^-4, 5.87×10^-5, 2.57×10^-5, 2.09×10^-5 cm2/s, respectively. The results show that the diffusion rate of the current study is approximately more than that of similar FSSLM systems containing Cyanex 923 used to transport various metals. The modeling values are in good agreement with the experimental data, showing the good reliability of the mathematical model.
基金Supported by the Action Plan for the Development of Western China of the Chinese Academy of Sciences(KZCX2-XB2-13)the Knowledge Innovation Program of the Chinese Academy of Sciences(KSCX2-YW-N-003)Research Fund for Excellent Doctoral Thesis of Xi'an University of Tehcnology(602-210805 and 602-210804)
文摘A novel d!sphase supplying supported liquid membrane （DSSLM）, containing supplying feed phase andsupplying stripping phase tor transport behavior ot NI（Ⅱ）, have been studied. The supplying supported feed phase included feed solution and di（2-ethyhexyl） phosphoric acid （HDEHP） as the carrier in kerosene, and supplying stripping phase included HDEHP as the cartier in kerosene and HC1 as the stripping agent. The effects of volume ratio of membrane solution to feed solution （O/F）, pH, initial concentration of Ni（Ⅱ） and ionic strength in the feedsolution, volume ratio of membrane solution to stripping solution （O/S）, concentration of H2SO4 solution, HDEHP concentration in the supplying stripping phase on transport of Ni（/I）, the advantages of DSSLM compared to the traditional supported liquid membrane （SLM）, the system stability, the reuse of membrane solution and the reten- tion of membrane phase were studied. Experimental results indicated that the optimum transpgrt of Ni（Ⅱ） was oh-tained when H2SO4 concentration was 2.00 mol＇L-＇, HDEHP concentration was 0.120 mol·L-1, and O/S was 4· 1 in the supplying stripping phase, O/F was 1 ： 10 and pH was 5.20 in the supplying feed phase. The ionic strength in supplying feed phase had no obvious effect on transport of Ni（Ⅱ）. When initial Ni（Ⅱ） concentration was 2.00x 10-4 mol/L, the transport percentage of Ni（Ⅱ） was up to 93.1% in 250 min. The kinetic equation was deduced in terms of the law of mass diffusion and the interface chemistry.
