The segregated flow pattern, which occurs in a 26.1 mm diameter, horizontal, stainless steel test section, is investigated. Pressure gradient and in situ phase distribution data were obtained for different combination...The segregated flow pattern, which occurs in a 26.1 mm diameter, horizontal, stainless steel test section, is investigated. Pressure gradient and in situ phase distribution data were obtained for different combinations of phase superficial velocities ranging from 0.05 m.s^-1 to 0,96 m.s^-1. For the current small Eoetvoes number liquid-liquid system （EOD=4.77）, the dominant effect of interfacial tension and wall-wetting properties of the liquids over the gravity is considered. The approach introduces the closure relationship for the case of turbulent flow m a rough pipe, and attempts to modify the two-fluid model to account for the curved interface. In present flow rates range, wave amplitudes were found small, while interfacial mixing was observed. An adjustable definition for hydraulic diame- ters of two fluids and interfacial friction factor is adopted. The predicted pressure gradient and in situ phase distribution data have been compared with present experimental data and those reported in the literature.展开更多
To realize a stable addition of foaming agent used for foam technology, a new adding method using the jet cavitation was introduced, and its performance was investigated experimentally under different operating condit...To realize a stable addition of foaming agent used for foam technology, a new adding method using the jet cavitation was introduced, and its performance was investigated experimentally under different operating conditions. Experimental results show that the bubble region in the jet device has a constant vapor pressure, which creates a good condition for liquid absorption, while it shrinks with increasing outlet pressure. The liquid absorption amount keeps unchanged when the outlet pressure is lower than a critical value. The critical outlet pressure increases by 40% with decreasing cavitation absorption amount, which is especially suitable for mini-flow quantitative addition of foaming agent used for foam dust suppression. Its effectiveness on suppressing mine dust was evaluated in a heading face of underground coal mines. Field application indicates that the reliable and simple foaming system adopting the new adding method makes a marked dust suppression effect. The working environment of heading face is significantly improved, ensuring the safe tunneling and personal security.展开更多
In this paper, the equilibrium surface tension and the dynamic surface tension of aqueous Triton X-100 solution at temperature 25 ℃ were measured by means of Wilhelmy plate method and maximal bubble pressure method r...In this paper, the equilibrium surface tension and the dynamic surface tension of aqueous Triton X-100 solution at temperature 25 ℃ were measured by means of Wilhelmy plate method and maximal bubble pressure method respectively. The determined critical micellar concentration（cmc） of Triton X-100 at 25 ℃ is (2.2×10-4) mol/dm3. The adsorption mechanics of Triton X-100 at air/solution was determined. For the submicellar concentrations it is diffusion-controlled. The diffusion coefficient was calculated from the experimental data in the range of short limit. In the range of long time adsorption, the subsurface concentration is fitted from the measured dynamic surface tensions.展开更多
The equilibrium of the solid-liquid interface in pressurized solidification process of binary alloys was studied using the Gibbs theory, and the stability of the solid-liquid interface was discussed based on the consi...The equilibrium of the solid-liquid interface in pressurized solidification process of binary alloys was studied using the Gibbs theory, and the stability of the solid-liquid interface was discussed based on the consideration of the effects of pressure on the diffusion coefficient, the interface growth rate and tile equilibrium liquid composition. A mathematical description of the equi- librium status, the relationship of temperature, pressure, composition and interfacial tension was obtained, and further, a mathematical representation of the curvature radius of solid-liquid interface was developed, which facilitates a thorough understanding of the controlled variables of the interfacial stability.展开更多
基金the National High Technology Research and Development Program of China (2006AA09Z333)
文摘The segregated flow pattern, which occurs in a 26.1 mm diameter, horizontal, stainless steel test section, is investigated. Pressure gradient and in situ phase distribution data were obtained for different combinations of phase superficial velocities ranging from 0.05 m.s^-1 to 0,96 m.s^-1. For the current small Eoetvoes number liquid-liquid system （EOD=4.77）, the dominant effect of interfacial tension and wall-wetting properties of the liquids over the gravity is considered. The approach introduces the closure relationship for the case of turbulent flow m a rough pipe, and attempts to modify the two-fluid model to account for the curved interface. In present flow rates range, wave amplitudes were found small, while interfacial mixing was observed. An adjustable definition for hydraulic diame- ters of two fluids and interfacial friction factor is adopted. The predicted pressure gradient and in situ phase distribution data have been compared with present experimental data and those reported in the literature.
基金Project(51474216)supported by the National Natural Science Foundation of ChinaProject supported by the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions,ChinaProject(2012DXS02)supported by the Fundamental Research Funds for the Central Universities,China
文摘To realize a stable addition of foaming agent used for foam technology, a new adding method using the jet cavitation was introduced, and its performance was investigated experimentally under different operating conditions. Experimental results show that the bubble region in the jet device has a constant vapor pressure, which creates a good condition for liquid absorption, while it shrinks with increasing outlet pressure. The liquid absorption amount keeps unchanged when the outlet pressure is lower than a critical value. The critical outlet pressure increases by 40% with decreasing cavitation absorption amount, which is especially suitable for mini-flow quantitative addition of foaming agent used for foam dust suppression. Its effectiveness on suppressing mine dust was evaluated in a heading face of underground coal mines. Field application indicates that the reliable and simple foaming system adopting the new adding method makes a marked dust suppression effect. The working environment of heading face is significantly improved, ensuring the safe tunneling and personal security.
文摘In this paper, the equilibrium surface tension and the dynamic surface tension of aqueous Triton X-100 solution at temperature 25 ℃ were measured by means of Wilhelmy plate method and maximal bubble pressure method respectively. The determined critical micellar concentration（cmc） of Triton X-100 at 25 ℃ is (2.2×10-4) mol/dm3. The adsorption mechanics of Triton X-100 at air/solution was determined. For the submicellar concentrations it is diffusion-controlled. The diffusion coefficient was calculated from the experimental data in the range of short limit. In the range of long time adsorption, the subsurface concentration is fitted from the measured dynamic surface tensions.
基金supported by the National Natural Science Foundation of China(Grant Nos.50875143 and 50675113)the support of the Scientific Research Foundation for the Returned Overseas Chinese Scholars,Ministry of Education of Chinathe support of State Key Laboratory of Materials Processing and Die & Mould Technology,Huazhong University of Science and Technology
文摘The equilibrium of the solid-liquid interface in pressurized solidification process of binary alloys was studied using the Gibbs theory, and the stability of the solid-liquid interface was discussed based on the consideration of the effects of pressure on the diffusion coefficient, the interface growth rate and tile equilibrium liquid composition. A mathematical description of the equi- librium status, the relationship of temperature, pressure, composition and interfacial tension was obtained, and further, a mathematical representation of the curvature radius of solid-liquid interface was developed, which facilitates a thorough understanding of the controlled variables of the interfacial stability.
