用地震资料估计的龙门山断裂深部形变及其对于汶川地震成因的意义

2008年5月12日汶川8.0级地震前龙门山断裂被"忽视"的原因之一是地质学证据和GPS测量证据均显示龙门山断裂长期以来形变速率很低。问题是,构造地质的结果是对一个较长的时间尺度的,而GPS结果反映的是较短时间尺度上的、地表上的、水平方向的形变,因此有理由怀疑由此得到的结论能否反映现今龙门山断裂的深部形变的全貌。我们采用类似于Kostrov方法的思路,利用最近30a的地震资料,试图研究龙门山断裂的深部形变,并与其相邻的断裂进行比较。利用ML2.5以上的微震资料,给出了沿龙门山断裂带的累积Benioff应变,并根据震级-频度关系计算了a值的空间分布。作为对照,同时计算了龙门山断裂邻区沿鲜水河、安宁河、则木河断裂各区域内的累积Benioff应变和a值。结果表明,在与地质学证据不同的时间尺度上,在与GPS证据不同的时间尺度、不同的深度上,并且不仅考虑到水平形变,与周边的断裂带相比,龙门山断裂带其实并不是一个"安静的"断裂带。在更短的时间尺度上,可以回溯性地观察到微震活动的一些异常变化,但这些变化似乎很难用于该地震的预测。我们讨论了相关的观测资料分析对于汶川地震的成因的意义。

Elastoplastic model for discontinuous shear deformation of deep rock mass

Deep rock mass possesses some unusual properties due to high earth stress,which further result in new problems that have not been well understood and explained up to date.In order to investigate the deformation mechanism,the complete deformation process of deep rock mass,with a great emphasis on local shear deformation stage,was analyzed in detail.The quasi continuous shear deformation of the deep rock mass is described by a combination of smooth functions:the averaged distribution of the original deformation field,and the local discontinuities along the slip lines.Hence,an elasto-plastic model is established for the shear deformation process,in which the rotational displacement is taken into account as well as the translational component.Numerical analysis method was developed for case study.Deformation process of a tunnel under high earth stress was investigated for verification.

Frictional contact algorithm study on the numerical simulation of large deformations in deep soft rock tunnels

There exist three types of nonlinear problems in large deformation processes of deep softrock engineering, i.e., nonlin- earity caused by material, geometrical and contact boundary. In this paper, the numerical method to tackle the nonlinear eontact and large deformation problem in A Software on Large Deformation Analysis for Soft Rock Engineering at Great Depth was presented. In the software, based on Lagrange multiplier method and Coulomb friction law, kinematic constraints on contact boundaries were introduced in functional function, and the finite element equations was established for two incremental large deformation analyses models, polar decomposition model and additive decomposition model. For every incremental loading step, by searching for the contact points in the potential contact interfaces （the excavation boundaries）, the Lagrange multipliers, i.e., contact forces are cal- culated iteratively by Gauss-Seidel method, and justified through satisfy the inequalities of static constraint on contact boundaries. With the software, large deformation and frictional contact of a transport roadway were analyzed numerically by the two models. The numerical examples demonstrated the efficiency of the method used in the software.

Stability control of surrounding rocks for a coal roadway in a deep tectonic region

In order to effectively control the deformation and failure of surrounding rocks in a coal roadway in a deep tectonic region, the deformation and failure mechanism and stability control mechanism were studied. With such methods as numerical simulation and field testing, the distribution law of the displacement, stress and plastic zone in the surrounding rocks was analyzed. The deformation and failure mechanisms of coal roadways in deep tectonic areas were revealed: under high tectonic stress, two sides will slide along the roof or floor; while the plastic zone of the two sides will extend along the roof or floor,leading to more serious deformation and failure in the corner of two sides and the bolt supporting the corners is readily cut off by the shear force or tension force. Aimed at controlling the large slippage deformation of the two sides, serious deformation and failure in the corners of the two sides and massive bolt breakage, a ‘‘controlling and yielding coupling support'' control technology is proposed. Firstly, bolts which do not pass through the bedding plane should be used in the corners of the roadway, allowing the two sides to have some degree of sliding to achieve the purpose of ‘‘yielding'' support, and which avoid breakage of the bolts in the corner. After yielding support, bolts in the corner of the roadway and which pass through the bedding plane should be used to control the deformation and failure of the coal in the corner. ‘‘Controlling and yielding coupling support'' technology has been successfully applied in engineering practice, and the stability of deep coal roadway has been greatly improved.

Deformation characteristics of surrounding rock of broken and soft rock roadway

A similar material model and a numerical simulation were constructed and are described herein. The deformation and failure of surrounding rock of broken and soft roadway are studied by using these models. The deformation of the roof and floor, the relative deformation of the two sides and the deformation of the deep surrounding rock are predicted using the model. Measurements in a working mine are compared to the results of the models. The results show that the surrounding rock shows clear theological features under high stress conditions. Deformation is unequally distributed across the whole section. The surrounding rock exhibited three deformation stages： displacement caused by stress concentration, theological displacement after the digging effects had stabilized and displacement caused by supporting pressure of the roadway. Floor heave was serious, accounting for 65% of the total deformation of the roof and floor. Floor heave is the main reason for failure of the surrounding rock. The reasons for deformation of the surrounding rock are discussed based on the similar material and numerical simulations.

Surrounding rock control mechanism of deep coal roadways and its application

Aiming at the surrounding rock control problem of mining and preparation entries in Xingdong mine with large mining depth, and the comprehensive control countermeasures including high pre-stress cable truss system, this study put forward powerful anchor support system and anchor cable adaption technology to surrounding rock deformation. Furthermore, the control measures possess the supporting performance with ‘‘primary rigid-following flexible-new rigid, and primary resistance-following yield-new resistance'', which suits deep roadway surrounding rock control. The mechanical model of truss anchor supporting roof beams was established, and the inverted arch deflection produced by the cable pre-stress with stress increment effect and roof beam deflection were obtained. And then the system working mechanism was illustrated. Finally, the surrounding rock support parameters were determined by means of comprehensive methods, and put into practice. The results show that surrounding rock deformation realized secondary stability after three months. The roadway sides convergence value was less than 245mm, and roof subsidence was less than 124mm. In addition, there was no expansion and renovation during service period.

An experimental study of a yielding support for roadways constructed in deep broken soft rock under high stress

A rationally designed support for deep roadways excavated in broken soft rock under high stress was investigated. The deformation and failure characteristics and the mechanism of ''yielding support'' was studied for anchor bolts and cables. The rail roadway of the 2-501 working face in the Liyazhuang Mine of the Huozhou coal area located in Shanxi province was used for field trials. The geological conditions used there were used during the design phase. The new ''highly resistant, yielding'' support system has a core of high strength, yielding bolts and anchor cables. The field tests show that this support system adapts well to the deformation and pressure in the deep broken soft rock. The support system effectively controls damage to the roadway and ensures the long term stability of the wall rock and safe production in the coal mine. This provides a remarkable economic and social benefit and has broad prospects for fur- ther application.

A study of support strategies in deep soft rock:The horsehead crossing roadway in Daqiang Coal Mine

Geomechanics in deep mines becomes more complex and structural support in soft rock can be very difficult.Highly stressed soft rock subject to expansion deformation is particularly difficult to control.The Tiefa Coal Industry Group Daqiang Coal Mine is used as an example.A ventilation shaft,à550 horsehead,is located in tertiary soft rock.Analysis of the reasons for deformation shows an intumescent rock,which is easily damaged.Field observations and theoretical analysis led to a design capable of stabilizing the rock.A combination of spray,anchors,anchor bolts,and soft corner coupled truss supports allowed the deformation to be controlled.This provides a model for similar designs when support of a horsehead roadway is required.

Roadway deformation during riding mining in soft rock

"Riding mining" is a form of mining where the working face is located above the roadway and advances parallel to it.Riding mining in deep soft rock creates a particular set of problems in the roadway that include high stresses,large deformations,and support difficulties.Herein we describe a study of the rock deformation mechanism of a roadway as observed during riding mining in deep soft rock.Theoretical analysis,numerical simulations,and on site monitoring were used to examine this problem.The stress in the rock and the visco-elastic behavior of the rock are considered.Real time data,recorded over a period of 240 days,were taken from a 750 transportation roadway.Stress distributions in the rock surrounding the roadway were studied by comparing simulations to observations from the mine.The rock stress shows dynamic behavior as the working face advances.The pressure increases and then drops after peaking as the face advances.Both elastic and plastic deformation of the surrounding rock occurs.Plastic deformation provides a mechanism by which stress in the rock relaxes due to material flow.A way to rehabilitate the roadway is suggested that will help ensure mine safety.

Deformation mechanism and excavation process of large span intersection within deep soft rock roadway

The FLAC3D software was used to simulate and analyze numerically the displacement, stress and plastic zone distribu-tion characteristics of a large span intersection in a deep soft rock roadway after the surrounding rock was excavated. Our simula-tion results show that there are two kinds of dominating factors affecting roadway stability at points of intersection, one is the angle between horizontal stress and axial direction of the roadway and the other are the angles at the points of intersection. These results are based on a study we carried out as follows: first, we analyzed the failure mechanism of a large span intersection and then we built a mechanical model of a rock pillar at one of the points of intersection. At the end of this analysis, we obtained the failure characteristics of the critical parts on the large span intersection. Given these failure characteristics, we proposed a new supporting method, i.e., a Double-Bolt Control Technology (DBCT). By way of numerical simulation, DBCT can effectively control the deformation of the surrounding rock at the points of intersection in roadways.

Failure mechanism and supporting measures for large deformation of Tertiary deep soft rock

The Shenbei mining area in China contains typical soft rock from the Tertiary Period. As mining depths increase, deep soft rock roadways are damaged by large deformations and constantly need to be repaired to meet safety requirements, which is a great security risk. In this study, the characteristics of deformation and failure of typical roadway were analyzed, and the fundamental reason for the roadway deformation was that traditional support methods and materials cannot control the large deformation of deep soft rock. Deep soft rock support technology was developed based on constant resistance energy absorption using constant resistance large deformation bolts. The correlative deformation mechanisms of surrounding rock and bolt were analyzed to understand the principle of constant resistance energy absorption. The new technology works well on-site and provides a new method for the excavation of roadwavs in Tertiary deed soft rock.

Deep-seated large-scale toppling failure in metamorphic rocks：a case study of the Erguxi slope in southwest China

Deep-seated large-scale toppling failure presents unique challenges in the study of natural slope deformation process in mountainous regions.An active deep-seated toppling process was identified in the Erguxi slope located in southwest China,which affected a large area and damaged critical transportation infrastructure with the volume of the deforming rock mass exceeding 24×10~6 m^3.It poses significant risks to the downstream Shiziping Hydropower Station by damming the Zagunao River.Field investigation and monitoring results indicate that the deformation of the Erguxi slope is in the advanced stage of deep-seated toppling process,with the formation of a disturbed belt but no identifiable master failure surface.It was postulated that the alternating tensile and shear strength associated with the hard/soft laminated rock strata of metasandstone and phyllite layers preclude the development of either a tensile or shear failure surface,which resulted in the continuous deformation and displacement without a catastrophic mass movement.The slope movement is in close association with the unfavorable geological conditions of the study area in addition to the construction of transportation infrastructure and the increase of the reservoir level.On the basis of the mechanism and intensity of the ongoing toppling deformation,a qualitative grading system was proposed to describe the toppling process and toevaluate the slope stability.This paper summarized the field observation and monitoring data on the toppling deformation for better characterizing its effect on the stability of the Erguxi slope.The qualitative grading system intends to provide a basis for quantitative study of large-scale deep-seated toppling process in metamorphic rocks.