Fatigue behavior of crane beam strengthened with CFRP

In order to study the fatigue behavior of the damaged reinforced concrete （RC） beams strengthened by carbon fiber reinforced polymer （CFRP） laminate, three T-shaped beams strengthened by CFRP and one contrasting beam are tested under fatigue loading, with the parameters of different modes of strengthening and different fatigue load levels considered. The main results obtained from the tests are： the width of the crack decreases 50. 2% to 66%, and the development of the crack is limited; the stress of steel decreases 24. 1% to 28. 2%, and the stiffness increases 14.9% to 16. 1% after being strengthened. Based on the technical specification for strengthening concrete structures with CFRP and the conclusions from the tests, a calculating scheme of the flexure stiffness is given, which can be used for reference in engineering design. Finally, some suggestions are given for design in fatigue strengthening.

PF系列塑料导爆索的研制

PF系列塑料缠绕包复导爆索(包括爆速系列和药量系列)是为适应南芬露天铁矿混装车对起爆器材的要求而研制的。文中阐述了它的特点、制造工芝及性能指标。试验证明它具有耐高低温、抗酸碱性,以及抗水性强、性能稳定、结构新颖合理等优点,可满足混装车对起爆器材的要求,也适用于没有煤尘的其他爆破作业。

Numerical simulation for sheet metal forming process of 16Mn blade of large concrete-mixer truck

A finite element analysis method was used to simulate the stamping process of the blade of a large concrete-mixer truck. The updated Lagrange method and the elasto-plastic constitutive equation were adopted to solve the large strain and displacement deformation of the blade. A modified Coulomb friction model was used to solve the sliding contact between the blade and the dies. The von Mises stress distribution in the blade, the spatial displacement variation and the spring-back of the typical node were investigated in the simulation. The von Mises stress in the blade where the spring-back occurs is lowered from 463.0MPa to 150.0MPa before and after the spring-back. A typical node in the blade has a 3.33mm spring-back in Z direction. The results of the (experiments) agree well with the simulation. The analysis results are valuable for designing optimal tool dies.

Study on determining of reinforced concrete false roof strength and design of reinforcement based on reliability theory

Study on efficient mining of the steep incline and fractured ore-bodies in Yongshaba mine of Guizhou Kailin Group shows that ore-body is fractured and difficult to support the roadways in-vein.After research of the actual conditions about the ore-bodies,we have made the initial decision to adopt reconstruction of roof downward sublevel cut-and-fill mining.The men work safely under the false roof supporting the top plate.However,the difficult problem is how to determine the strength of the false roof.In this case,the method based on reliability theory has been put forward.Combined with elastic mechanics and field practice,when practical value of reliable probability is 90 %,the value of the false roof strength has been calculated,and the study shows that stope span greatly influences the false roof strength.With the strength of artificial roof,the reasonable reinforcement design ensures the false roof which can supply the demand of strength under large span and load.

Cost Impact of Increasing Heavy Vehicle Loads on Bridges

This study aimed to investigate the cost impact of meeting the increase in freight demand by doubling the truck weight （AS 1 ）, doubling the traffic volume （AS2）, or legalizing a new-proposed-truck of 97-kip weight instead of the currently legal 80-kip truck （AS3）. The State of Michigan＇s average daily traffic database of year 2001 has been used as a case study. The study was applied only on the very common US Bridge with RC （reinforced concrete） deck over steel girder. Sampling criteria also includes the age of the bridges. The study covered the four-cost-impact categories provided by the NCHRP （National Cooperative Research Program）. The current truck weight and double traffic volume （AS2） show the best scenario to meet the increase in freight demand. However, doubling the truck weight with the current traffic volume （AS 1） was the worst scenario. The use of the proposed 97-kip truck with the current traffic volume （AS3） compromises both, meeting the increase in freight demand and the cost impact.

Field study on performance of new technique of geosynthetic-reinforced and pile-supported embankment at bridge approach

Vehicle bumps at a bridge approach caused by the differential settlement between a bridge and an adjacent backfill embankment are one of the most difficult problems in geotechnical engineering. Large vehicle bumps make drivers uncomfortable and cause large impact loads on vehicles and the bridge abutment. A new ground-improvement technique called fixed-geosynthetic-reinforced and pile-supported embankment(FGT embankment) was developed and used to alleviate vehicle bumps at a trial bridge-approach site located in central China. To distribute the differential settlement between the bridge and adjacent backfill embankment over a long transition zone, the following three techniques were used at the trial bridge-approach site:(a) the FGT embankment,(b) conventional geosynthetic-reinforced and pile-supported embankment(CT embankment), and(c) geosynthetic-reinforced embankment without piles(GR embankment). The performance of all three techniques in the field trial was investigated by field measurements involving earth pressure cells, geosynthetic deformation sensors, and settlement gauges. The FGT and CT embankments exhibited better performance than the GR embankment. Compared with the CT embankment, the FGT embankment was more effective at ground improvement. At an elevation of 4.0 m from the base of the embankment, the pressures below the geosynthetic were smaller than those above the geosynthetic at the closest measurement point. The difference between the pressures between above and below the geosynthetic tended to increase with the embankment height.