Bundled hybrid offset riser (BHOR) global strength analysis, which is more complex than single line offset riser global strength analysis, was carried out in this paper. At first, the equivalent theory is used to deal...Bundled hybrid offset riser (BHOR) global strength analysis, which is more complex than single line offset riser global strength analysis, was carried out in this paper. At first, the equivalent theory is used to deal with BHOR, and then its global strength in manifold cases was analyzed, along with the use of a three-dimensional nonlinear time domain finite element program. So the max bending stress, max circumferential stress, and max axial stress in the BHOR bundle main section (BMS) were obtained, and the values of these three stresses in each riser were obtained through the "stress distribution method". Finally, the Max Von Mises stress in each riser was given and a check was made whether or not they met the demand. This paper provides a reference for strength analysis of the bundled hybrid offset riser and some other bundled pipelines.展开更多
The technology of simultaneous-source acquisition of seismic data excited by several sources can significantly improve the data collection efficiency. However, direct imaging of simultaneous-source data or blended dat...The technology of simultaneous-source acquisition of seismic data excited by several sources can significantly improve the data collection efficiency. However, direct imaging of simultaneous-source data or blended data may introduce crosstalk noise and affect the imaging quality. To address this problem, we introduce a structure-oriented filtering operator as preconditioner into the multisource least-squares reverse-time migration （LSRTM）. The structure-oriented filtering operator is a nonstationary filter along structural trends that suppresses crosstalk noise while maintaining structural information. The proposed method uses the conjugate-gradient method to minimize the mismatch between predicted and observed data, while effectively attenuating the interference noise caused by exciting several sources simultaneously. Numerical experiments using synthetic data suggest that the proposed method can suppress the crosstalk noise and produce highly accurate images.展开更多
A real-time pedestrian detection and tracking system using a single video camera was developed to monitor pedestrians. This system contained six modules: video flow capture, pre-processing, movement detection, shadow ...A real-time pedestrian detection and tracking system using a single video camera was developed to monitor pedestrians. This system contained six modules: video flow capture, pre-processing, movement detection, shadow removal, tracking, and object classification. The Gaussian mixture model was utilized to extract the moving object from an image sequence segmented by the mean-shift technique in the pre-processing module. Shadow removal was used to alleviate the negative impact of the shadow to the detected objects. A model-free method was adopted to identify pedestrians. The maximum and minimum integration methods were developed to integrate multiple cues into the mean-shift algorithm and the initial tracking iteration with the competent integrated probability distribution map for object tracking. A simple but effective algorithm was proposed to handle full occlusion cases. The system was tested using real traffic videos from different sites. The results of the test confirm that the system is reliable and has an overall accuracy of over 85%.展开更多
基金Supported by the National Natural Science Foundation of China (Grant No.51009033)
文摘Bundled hybrid offset riser (BHOR) global strength analysis, which is more complex than single line offset riser global strength analysis, was carried out in this paper. At first, the equivalent theory is used to deal with BHOR, and then its global strength in manifold cases was analyzed, along with the use of a three-dimensional nonlinear time domain finite element program. So the max bending stress, max circumferential stress, and max axial stress in the BHOR bundle main section (BMS) were obtained, and the values of these three stresses in each riser were obtained through the "stress distribution method". Finally, the Max Von Mises stress in each riser was given and a check was made whether or not they met the demand. This paper provides a reference for strength analysis of the bundled hybrid offset riser and some other bundled pipelines.
基金supported by the National Natural Science Foundation of China(Nos.41374122 and 41504100)
文摘The technology of simultaneous-source acquisition of seismic data excited by several sources can significantly improve the data collection efficiency. However, direct imaging of simultaneous-source data or blended data may introduce crosstalk noise and affect the imaging quality. To address this problem, we introduce a structure-oriented filtering operator as preconditioner into the multisource least-squares reverse-time migration （LSRTM）. The structure-oriented filtering operator is a nonstationary filter along structural trends that suppresses crosstalk noise while maintaining structural information. The proposed method uses the conjugate-gradient method to minimize the mismatch between predicted and observed data, while effectively attenuating the interference noise caused by exciting several sources simultaneously. Numerical experiments using synthetic data suggest that the proposed method can suppress the crosstalk noise and produce highly accurate images.
基金Project(50778015)supported by the National Natural Science Foundation of ChinaProject(2012CB725403)supported by the Major State Basic Research Development Program of China
文摘A real-time pedestrian detection and tracking system using a single video camera was developed to monitor pedestrians. This system contained six modules: video flow capture, pre-processing, movement detection, shadow removal, tracking, and object classification. The Gaussian mixture model was utilized to extract the moving object from an image sequence segmented by the mean-shift technique in the pre-processing module. Shadow removal was used to alleviate the negative impact of the shadow to the detected objects. A model-free method was adopted to identify pedestrians. The maximum and minimum integration methods were developed to integrate multiple cues into the mean-shift algorithm and the initial tracking iteration with the competent integrated probability distribution map for object tracking. A simple but effective algorithm was proposed to handle full occlusion cases. The system was tested using real traffic videos from different sites. The results of the test confirm that the system is reliable and has an overall accuracy of over 85%.
